Cantitate/Preț
Produs
Total produse
Vezi coșul
Additive Manufacturing: Design, Processes and Applications de Panagiotis Stavropoulos

Additive Manufacturing: Design, Processes and Applications: SpringerBriefs in Applied Sciences and Technology

Autor Panagiotis Stavropoulos
en Limba Engleză Paperback – 2 iul 2023
This book is a comprehensive guide to Additive Manufacturing (AM) product development. It offers a practical, reader-friendly approach to integrating the stages of product development. It covers current design and manufacturing strategies with a step-by-step approach, divided into three pillars: design, processes, and applications.
The book addresses the challenges hindering the industrial application of AM and provides a roadmap for its successful implementation. It discusses specific AM case studies and hybrid AM cell and production line setups, with the goal of achieving high-quality, low-cost products that are both flexible and productive. The book concludes with an examination of Industry 4.0 capabilities in decentralized manufacturing.
It is aimed to be read by researchers and professionals in industry who are interested in the development and potential of additive manufacturing, and will help to lead to wider adoption of AM.
Citește tot Restrânge

Din seria SpringerBriefs in Applied Sciences and Technology

  • Brownfield Transformation in Fragile Territories: An Interreg-Based Action Research
    Preț: 40823 lei
  • 17% Active House: Smart Nearly Zero Energy Buildings
    Preț: 36033 lei
  • Deep Energy Retrofit—A Guide for Decision Makers
    Preț: 36992 lei
  • Self-powered Energy Harvesting Systems for Health Supervising Applications
    Preț: 37372 lei
  • Modeling of Gas-to-Particle Mass Transfer in Turbulent Flows
    Preț: 14123 lei
  • 20% Blockchain Foundations and Applications
    Preț: 32082 lei
  • Intermittency Equation for Transitional Flow
    Preț: 37276 lei
  • Civil and Environmental Engineering for the Sustainable Development Goals: Emerging Issues
    Preț: 19587 lei
  • 20% Intelligent Random Walk: An Approach Based on Learning Automata
    Preț: 29383 lei
  • Vibration Analysis of Functionally Graded Piezoelectric Actuators
    Preț: 40256 lei
  • Magnetic Resonators: Feedback with Magnetic Field and Magnetic Cavity
    Preț: 33916 lei
  • Nanomedicine for Cancer Therapy: From Chemotherapeutic to Hyperthermia-Based Therapy
    Preț: 35548 lei
  • Special Topics in Information Technology
    Preț: 26032 lei
  • Stochastic Exponential Growth and Lattice Gases: Statistical Mechanics of Stochastic Compounding Processes
    Preț: 37592 lei
  • Power-Based Study of Boundary Layer Ingestion for Aircraft Application
    Preț: 37372 lei
  • Timber Connections: Mortise and Tenon Structural Design
    Preț: 35565 lei
  • 20% Deployment and Operation of Complex Software in Heterogeneous Execution Environments: The SODALITE Approach
    Preț: 22149 lei
  • 20% Cognitive Semantics of Artificial Intelligence: A New Perspective
    Preț: 38611 lei
  • Designing Software Intensive Products: Integrating Engineering and Intellectual Property Management to the Development of Innovative Products
    Preț: 37181 lei
  • Memristive Nonlinear Electronic Circuits: Dynamics, Synchronization and Applications
    Preț: 37181 lei
  • Mathematical Models for Therapeutic Approaches to Control Psoriasis
    Preț: 37126 lei
  • Controlling Differential Settlement of Highway Soft Soil Subgrade: A New Method and Its Engineering Applications
    Preț: 37163 lei
  • 20% Hybrid Video Compression Standard
    Preț: 30185 lei
  • 15% A Mathematical Perspective on Flight Dynamics and Control
    Preț: 45476 lei
  • Comprehensive Energy Management – Eco Routing & Velocity Profiles
    Preț: 14198 lei
  • Oriented Self-Assembly of Colloidal Semiconductor Nanoplatelets on Liquid Interfaces: Methods and Applications
    Preț: 37087 lei
  • Stability of Non-Linear Constitutive Formulations for Viscoelastic Fluids
    Preț: 35592 lei
  • Agricultural Policy: A Driver for Structural and Technological Change
    Preț: 37655 lei
  • Design for Enhancing Eco-efficiency of Energy-related Products: The Integration of Simplified LCA Tools in Industrial Design Education
    Preț: 37181 lei
  • Acoustic Invisibility for Elliptic Objects: Theory and Experiments for Underwater Sound
    Preț: 37181 lei
  • Plasmonic Photocatalysis: Principles and Applications
    Preț: 33916 lei
  • Modular Multilevel Converter Modelling and Simulation for HVDC Systems: State of the Art and a Novel Approach
    Preț: 37372 lei
  • Modeling of Archaeomagnetic Anomaly Maps
    Preț: 37392 lei
  • 3D FEA Simulations in Machining
    Preț: 30747 lei
  • Tribology of Elastomers
    Preț: 37655 lei
  • Service Design for Urban Commons
    Preț: 35642 lei
  • Artificial Intelligence and Lean Manufacturing
    Preț: 37028 lei
  • Flexible OLEDs: Fundamental and Novel Practical Technologies
    Preț: 40539 lei
  • Ventilation and Energy Efficiency in Welding Shops: A Practical Guide
    Preț: 47164 lei
  • Combined Theoretical and Experimental Study of Ice Behavior Under Shock and Explosive Loads
    Preț: 37028 lei
  • Predictive Models for Decision Support in the COVID-19 Crisis
    Preț: 27363 lei
  • 20% Speeding-Up Radio-Frequency Integrated Circuit Sizing with Neural Networks
    Preț: 31921 lei
  • Satellite Image Analysis: Clustering and Classification
    Preț: 43708 lei
  • 20% Artificial Intelligence versus Human Intelligence: Are Humans Going to Be Hacked?
    Preț: 28391 lei
  • Bond Failure Mechanism of Fully Grouted Rock Bolts
    Preț: 25748 lei
  • Site Diversity in Satellite Communications: Modelling Using Copula Functions
    Preț: 37560 lei
  • 20% Image Color Feature Extraction Techniques: Fundamentals and Applications
    Preț: 31677 lei
  • Human Subject Research for Engineers: A Practical Guide
    Preț: 41085 lei
  • Verifying Calculations - Forty Years On: An Overview of Classical Verification Techniques for FEM Simulations
    Preț: 37335 lei
  • Energy Generation using Reverse Electrodialysis: Principles, Implementation, and Applications
    Preț: 36804 lei

Preț: 33349 lei

Nou

Puncte Express: 500
Preț estimativ în valută:
6382€ • 6665$ • 5292£

Carte disponibilă

Livrare economică 21 ianuarie-04 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783031337925
ISBN-10: 3031337921
Pagini: 128
Ilustrații: XIV, 128 p. 81 illus., 62 illus. in color.
Dimensiuni: 155 x 235 mm
Greutate: 0.05 kg
Ediția:1st ed. 2023
Editura: Springer International Publishing
Colecția Springer
Seria SpringerBriefs in Applied Sciences and Technology

Locul publicării:Cham, Switzerland

Cuprins

Chapter 1. Introduction.- Chapter 2. Design for AM.- Chapter 3. AM Processes.- Chapter 4. AM Applications.- Chapter 5. Conclusions. 





Notă biografică

Dr. Stavropoulos is the Head of Manufacturing Processes Modelling and Energy Efficiency, in the Laboratory for Manufacturing Systems and Automation, Department of Mechanical Engineering and Aeronautics at the University of Patras.  His main research interests are focused in the field of conventional, non-conventional and micro-manufacturing processes. 
Dr. Stavropoulos holds a BEng in Mechanical Engineering and an M.Sc. in Advanced Mechanical Engineering from the University of Sussex, UK, a Ph.D. in Engineering from the Department of Mechanical Engineering and Aeronautics, University of Patras, Greece, and an M.B.A. from the HoU, Greece. He worked among others, as a Design Engineer (2000-2001) in Flowtronic Pumps Ltd, UK, Research Engineer (2001-2007) and Research Project Manager (2007-2009) in Laboratory of Manufacturing Systems & Automation and as WCP and Production Manager (2009-2014) at Crown Holdings Inc., Bevcan, Europe and Middle East Division. From 2014-2018, he was a Lecturer in Hellenic Air Force Academy, Department of Aeronautical Studies. Since 2018 he is a Professor in the Department of Mechanical Engineering & Aeronautics, University of Patras.
He has been involved and coordinated major industrial driven research projects in manufacturing in the context of the European Factories of the Future Research Association - EFFRA, as well as the European Institute of Innovation and Technology for Manufacturing - EIT M.  He is Member of the Institution of Mechanical Engineers – IMEchE, since 2000, registered as Chartered Engineer (Reg. N.: 594894) in the Engineering Council, the Virtual Research Laboratory for a Knowledge Community in Production – VRL-KciP, since 2004, Member of NATO AVT -258 “Future of manufacturing for military applications” and Member of the Technical Chamber of Greece and the Technical Chamber of Mechanical and Electrical Engineers.
Dr. Stavropoulos has published more than 200 publications in refereed international scientific journals national scientific journals, book chapters, and conference proceedings. 
 

Textul de pe ultima copertă

This book is a comprehensive guide to additive manufacturing (AM) product development. It offers a practical, reader-friendly approach to integrating the stages of product development. It covers current design and manufacturing strategies with a step-by-step approach, divided into three pillars: design, processes, and applications.
This book addresses the challenges hindering the industrial application of AM and provides a roadmap for its successful implementation. It discusses specific AM case studies and hybrid AM cell and production line setups, with the goal of achieving high-quality, low-cost products that are both flexible and productive. The book concludes with an examination of Industry 4.0 capabilities in decentralized manufacturing.
It is aimed to be read by researchers and professionals in industry who are interested in the development and potential of additive manufacturing, and will help to lead to wider adoption of AM.

Caracteristici

Provides an holistic analysis of additive manufacturing (AM) Shows step-by-step KPI optimization through process simulation, monitoring, and control Addresses the challenges of industrial application of AM throughout the supply chain