Cantitate/Preț
Produs
Total produse
Vezi coșul
Chipless Wood Cutting in Forestry de Ján Kováč

Chipless Wood Cutting in Forestry: Synthesis Lectures on Mechanical Engineering

Autor Ján Kováč, Tomáš Kuvik, Ján Melicherčík
en Limba Engleză Hardback – 23 feb 2024
This scientific monograph presents the results obtained during research in the field of chipless logging and consists of two parts. At the beginning of the book, the current state of the researched task in chipless logging using chipless logging heads is presented. The experimental measurement methodology will be determined after reviewing the theoretical analysis of the cutting heads. The measurement methodology describes the principle of research carried out on an experimental hydraulic stand based on defined parameters. Data obtained during experimental measurement can be analyzed in many areas, e.g. statistical influence of individual factors as well as their combinations. The energy demand of chipless knives is also determined during experimental measurement.
Citește tot Restrânge

Din seria Synthesis Lectures on Mechanical Engineering

  • 15% Nonlinear Vibration Reduction: An Electromagnetically Tuned Mass Damper System
    Preț: 52554 lei
  • 18% ENGINEERING DYNAMICS
    Preț: 57755 lei
  • Design Engineering Journey
    Preț: 39630 lei
  • Unmanned Aircraft Design: A Review of Fundamentals
    Preț: 19935 lei
  • Dynamics of Machines and Hydraulic Systems: Mechanical Vibrations and Pressure Pulsations
    Preț: 32617 lei
  • 19% Complex Variables for Engineers with Mathematica
    Preț: 45347 lei
  • 15% Instrumentation: Theory and Practice, Part 1: Principles of Measurements
    Preț: 52635 lei
  • Fiber-Reinforced Composite Materials: Characterization and Computational Predictions of Mechanical Performance
    Preț: 20783 lei
  • Data Analytics for Process Engineers: Prediction, Control and Optimization
    Preț: 32134 lei
  • Serviceability Limit States of Underground Structures
    Preț: 39352 lei
  • Digital Factory: A Digital Compass for Smart Manufacturing
    Preț: 32020 lei
  • Non-axisymmetric Local Stability Loss of a Hollow Cylinder: Three-Dimensional Stability Loss in Time-Dependent Composites
    Preț: 32040 lei
  • The Engineering Dynamics Course Companion, Part 1: ParticlesKinematics and Kinetics
    Preț: 48833 lei
  • Engineering Dynamics
    Preț: 38371 lei
  • Natural Corrosion Inhibitors
    Preț: 22465 lei
  • Instrumentation: Theory and Practice, Part 2: Sensors and Transducers
    Preț: 44821 lei
  • Fractional Calculus with its Applications in Engineering and Technology
    Preț: 22579 lei
  • MEMS Barometers Toward Vertical Position Detection: Background Theory, System Prototyping, and Measurement Analysis
    Preț: 27980 lei
  • 19% Introduction to Refrigeration and Air Conditioning Systems: Theory and Applications
    Preț: 44839 lei
  • 19% An Introduction to Finite Element Analysis Using Matlab Tools
    Preț: 45983 lei
  • Unmanned Aircraft Design: A Review of Fundamentals
    Preț: 41601 lei
  • 19% Structural Dynamics of Liquid Rocket Engines: A Holistic Approach
    Preț: 45129 lei
  • 19% A Comprehensive Approach to Digital Manufacturing
    Preț: 47834 lei
  • Machine Design for Technology Students: A Systems Engineering Approach
    Preț: 41345 lei
  • Towards Analytical Chaotic Evolutions in Brusselators
    Preț: 22571 lei
  • Solving Practical Engineering Mechanics Problems: Kinematics
    Preț: 35141 lei
  • Polynomial Functional Dynamical Systems
    Preț: 38312 lei
  • Automatic Flight Control Systems
    Preț: 41524 lei
  • Bifurcation Dynamics of a Damped Parametric Pendulum
    Preț: 26018 lei
  • Introduction to Kinematics and Dynamics of Machinery
    Preț: 41601 lei
  • Cold Atmospheric Plasma (CAP) Technology and Applications
    Preț: 45240 lei
  • Engineering Finite Element Analysis
    Preț: 39025 lei
  • Introduction to Deep Learning for Engineers: Using Python and Google Cloud Platform
    Preț: 22556 lei
  • Capstone Engineering Design: Project Process and Reviews (Student Engineering Design Workbook)
    Preț: 16681 lei
  • 19% Periodic Motions to Chaos in a Spring-Pendulum System
    Preț: 44702 lei
  • Reliability-Based Mechanical Design, Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability
    Preț: 45768 lei
  • 19% Flight Stability and Control
    Preț: 45838 lei
  • Reliability-Based Mechanical Design, Volume 1: Component under Static Load
    Preț: 45901 lei
  • 19% Design and Test of Dynamic Vibration Absorbers
    Preț: 44129 lei
  • Essential Engineering Thermodynamics: A Student's Guide
    Preț: 19130 lei
  • Modeling and Simulation of Nanofluid Flow Problems
    Preț: 18040 lei
  • 19% Mathematical Modeling of Dislocation Behavior and Its Application to Crystal Plasticity Analysis
    Preț: 44274 lei
  • Modeling and Simulation of Mechatronic Systems using Simscape
    Preț: 41524 lei
  • Fluid Mechanics Experiments
    Preț: 22656 lei
  • Mathematical Magnetohydrodynamics
    Preț: 38630 lei
  • Solving Practical Engineering Problems in Engineering Mechanics: Dynamics
    Preț: 38371 lei
  • Solving Practical Engineering Mechanics Problems: Fluid Mechanics
    Preț: 23096 lei

Preț: 32808 lei

Nou

Puncte Express: 492
Preț estimativ în valută:
6279€ • 6531$ • 5262£

Carte disponibilă

Livrare economică 20 februarie-06 martie

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783031529160
ISBN-10: 3031529162
Pagini: 199
Ilustrații: XXVI, 199 p. 143 illus., 84 illus. in color.
Dimensiuni: 168 x 240 mm
Greutate: 0.57 kg
Ediția:2024
Editura: Springer Nature Switzerland
Colecția Springer
Seria Synthesis Lectures on Mechanical Engineering

Locul publicării:Cham, Switzerland

Cuprins

INTRODUCTION.- Historical development in wood cutting theory.- Technical description of the chipless shielding head.- Chipless cutting of wood-felling knives.- Discussion-measuring with felling knives.- Course of experimental measurement.- Discussion.- Conclusion.

Notă biografică

Assoc. prof. Ing. Ján Kováč, PhD., is a docent at the Department of Environmental and Forestry Technology, Faculty of Environmental and Production Technology, Technical University in Zvolen (Slovak Republic). He graduated from the Forestry and Mobile Technology study program with a specialization in Mechanical Machinery and Equipment at the Faculty of Environmental and Production Technology of the Technical University in Zvolen (Slovak Republic). His pedagogic and scientific activity is focused on the cross-sectional process of wood cutting and branching, the basics of forestry technologies, forest logging machines and chain saws, transport mechanisms. He is the co-author of a scientific monograph entitled: Ergonomic operational working aspects of forest machines in Cambridge Scholars Publishing. Author and co-author of scientific publications and national patents and utility models in the field of chip and chipless wood processing. He is the co-author of the woodworking laboratory located at the department.

Ing. Tomáš Kuvik, PhD., is teacher at the Department of Environmental and Forestry Machinery, Faculty of Technology, Technical University in Zvolen. He graduated from the J. Murgaš Secondary Industrial School in Banská Bystrica in 2009, graduated from the Faculty of Technology of the Technical University of Zvolen in 2015. He completed his doctoral thesis on the topic "Research of cutting mechanisms of chainsaws" in 2018. In the pedagogical and scientific the research area is devoted to the problems is focused around transverse cutting with a saw chain and the construction of chainsaws.
Ing. Ján Melicherčík, PhD., is a scientific researcher at the Department of Environmental and Forestry Technology, Faculty of Technology at the Technical University in Zvolen (the Slovak Republic). He graduated from the Ecotechnics study program at the Faculty of Environmental and Manufacturing Technology at the Technical University in Zvolen (the Slovak Republic). Doctoral study on the topic Research of selected factors for the process of branching wood with specialization in harvester technology and branching heads was completed in the study program Mechanical Engineering - Production Technology, at the Faculty of Technology, Technical University in Zvolen. (Slovak republic).
His scientific research activity is focused on the field of wood processing in forestry, ways of dividing wood, branching of wood, cutting tools and mechanisms.

Textul de pe ultima copertă

This scientific monograph presents the results obtained during research in the field of chipless logging and consists of two parts. At the beginning of the book, the current state of the researched task in chipless logging using chipless logging heads is presented. The experimental measurement methodology will be determined after reviewing the theoretical analysis of the cutting heads. The measurement methodology describes the principle of research carried out on an experimental hydraulic stand based on defined parameters. Data obtained during experimental measurement can be analyzed in many areas, e.g. statistical influence of individual factors as well as their combinations. The energy demand of chipless knives is also determined during experimental measurement.

Caracteristici

The issue of chip-free wood cutting is not widely published Expands the knowledge about wood de-limbing with a harvester head Provides new data about chipless wood cutting in the forest