Cantitate/Preț
Produs

Engineering Challenges for Sustainable Future: Proceedings of the 3rd International Conference on Civil, Offshore and Environmental Engineering (ICCOEE 2016, Malaysia, 15-17 Aug 2016)

Editat de Noor Amila Wan Abdullah Zawawi
en Limba Engleză Hardback – 15 dec 2016
Engineering Challenges for Sustainable Future contains the papers presented at the 3rd International Conference on Civil, Offshore & Environmental Engineering (ICCOEE2016, Kuala Lumpur, Malaysia, 15-17 August 2016), under the banner of World Engineering, Science & Technology Congress (ESTCON2016).
The ICCOEE series of conferences started in Kuala Lumpur, Malaysia 2012, and the second event of the series took place in Kuala Lumpur, Malaysia 2014. This conference series deals with the civil, offshore & environmental engineering field, addressing the following topics:
• Environmental and Water Resources Engineering
• Coastal and Offshore Engineering
• Structures and Materials
• Construction and Project Management
• Highway, Geotechnical and Transportation Engineering and Geo-informatics
This book is an essential reading for academic, engineers and all professionals involved in the area of civil, offshore and environmental engineering.
Citește tot Restrânge

Preț: 117492 lei

Preț vechi: 159262 lei
-26% Nou

Puncte Express: 1762

Preț estimativ în valută:
22486 23722$ 18739£

Carte tipărită la comandă

Livrare economică 02-16 ianuarie 25

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9781138029781
ISBN-10: 1138029785
Pagini: 566
Dimensiuni: 174 x 246 mm
Greutate: 0.45 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press

Public țintă

Postgraduate and Professional

Cuprins

Coastal and offshore engineeringNumerical simulation of the flow passing a pipeline close to a flat seabed
F. Namazi-saleh, V.J. Kurian & Z. Mustaffa
Coastal vulnerability index at a RAMSAR site: A case study of Kukup mangrove island
A.K.A.Wahab, D.S.M. Ishak & M.H. Jamal
Effects of mooring lines and water depth parameters on the dynamic motion of a turret-moored FPSO
M.O. Ahmed &A. Musaad
VIV of four cylinders in side by side configurations – experimental and CFD simulations
A.M. Al-Yacouby, V.J. Kurian, M.S. Liew &V.G. Idichandy
Investigating the potential of soil-nail retaining structures as a slope strengthening remedy by capitalizing on reliability analysis technique
S. Qasim, I.S.H. Harahap, S. Baharom, M. Imran & D. Kazmi
Response of spar-mooring-riser system under random wave, current and wind loads
M. Jameel, A.E. Ibrahim & M.Z. Jumaat
Effects of current coexisting with random wave on offshore spar platforms
V.J. Kurian, S.N.A. Tuhaijan & C.Y. Ng
Nonlinear dynamic analysis of jacket-type offshore platform and optimization of leg batter
R. Senthil, S. Ishwarya & M. Arockiasamy
FPSO response and water depth: A study using model tests
V.J. Kurian, N. Rini, M.S. Liew &A. Whyte
Real time kinematic-GNSS methods for monitoring subsidence of offshore platform
K.C. Myint, A.N. Matori &A. Gohari
Incremental wave analysis method: An alternative to load factor method in SACS pushover analysis
M.M.A.Wahab, A.R.M.M. Kamal &V.J. Kurian
FRP shear contribution in externally bonded reinforced concrete beams with stirrups
H. Fazli &W. Teo
Coupled analysis for the effect of wave height on FPSO motions
N. Rini, V.J. Kurian, M.S. Liew &A. Whyte
The effect of short-crested waves on the dynamic responses of semisubmersible: A comparison of long and short-crested waves with current
C.Y. Ng & S.J. Ng
Decommissioning decision criteria for offshore installations and well abandonment
T.M.Q. Al-Ghuribi, M.S. Liew, N.A. Zawawi & M.A. Ayoub
Hydraulic efficiency of a pile-supported free surface breakwater subjected to random waves
S.S. Hassan, H.M. Teh &V.J. Kurian
Development of ultimate strength versus plate index diagram for initially deflected steel plate under axial compression
D.K. Kim, B.Y. Poh, J.R. Lee, K.S. Park & J.K. Paik
Rheological behavior of tsunami run-up water containing alluvial deposit at coastline of Kedah, Malaysia
A.K. Philip, H.M. Teh, S.H. Shafiai, A. Jaafar &A.H.M. Rashidi
An optimised model of pipe-in-pipe installation for subsea field
M.Z. Jiwa, D.K. Kim, Z. Mustaffa & H.S. Choi
Method for installation of marine HDPE pipeline
Y.T. Kim, K.S. Park, H.S. Choi, S.Y. Yu & D.K. Kim
Dynamic behaviour of tension leg platform in short-crested directional seas
D.O. Oyejobi, M. Jameel & N.H.R. Sulong
A simplified prediction method for subsea pipeline expansion
J.H. Seo, H.S. Choi, K.S. Park, S.Y. Yu & D.K. Kim
Tsunami risk assessment: How safe is Malaysia?
D.B. Shahruzzaman &A.M. Hashim
Wave transmission characteristics of sand containers used as submerged breakwaters
S. Gupta, H.M. Teh, A.M. Hashim & R.B.R. Sulaiman
The need of early response system to HNS accident based on case analysis
J.W. Ryu, J.M. Kim, S.M. Shin & H.K. Park
Construction and project management
Coordination process in construction projects management
W.S. Alaloul, M.S. Liew & N.A. Zawawi
Effectiveness of preventive safety management in construction
I. Othman, M. Napiah, M.F. Nuruddin & M.M.A. Klufallah
Highway project performance evaluation: A study
W. Sutrisno
Ranking of principal causes of construction waste for Malaysian residential project
U.A. Umar, N. Shafiq, A. Malakahmad, M.F. Nuruddin & I.U. Salihi
Attributes of coordination process in construction projects
W.S. Alaloul, M.S. Liew & N.A. Zawawi
Structural relationship of success factors for Small Medium Enterprises (SME) contractors in PLS-SEM model
I.A. Rahman, N.I. Rahmat & S. Nagapan
Categorization of Saudi Arabia’s construction delay factors using factor analysis technique
I.A. Rahman, N. Al-Emad & S. Nagapan
The awareness of green building ratings among university students
G. Hayder, O.A. Ahmed & S.B.C. Selia
Factors affecting the embodied carbon footprint potential—Assessment of conventional Malaysian housing habitat
S.S.S. Gardezi, N. Shafiq, M.F. Nuruddin, N.A. Zawawi & F.B. Khamidi
Optimization of residential roof design using system dynamics and building information modelling
S.A. Farhan, N. Shafiq, K.A.M. Azizli, F.K. Soon & L.C. Jie
The development of embodied carbon emission benchmark model for purpose built offices in Malaysia
M.M.A. Klufallah, M.F. Nuruddin, I. Othman & M.F. Khamidi
Environmental and water resource engineering
Influence of environmental factor on the performance of Pistia Stratiotes in a surface sequencing baffled steep flow constructed wetland
S.R.M. Kutty, E.H. Ezechi &A.T.A. Nagum
Influence of organic loading rate on a submerged two-stage integrated bioreactor without external carbon addition
E.H. Ezechi, S.R.M. Kutty, M.H. Isa, A. Malakahmad & E. Olisa
Performance of a bench scale anaerobic baffled reactor operated at ambient temperatures
U.A. Abubakar, M.M. Muhammad, F.B. Ibrahim, M.A. Ajibike &A. Ismail
Use of low frequency ultrasound for solids solubilization in Palm Oil Mill Effluent
L.-P.Wong, M.H. Isa & M.J.K. Bashir
The performance investigation of three glass cover solar stills using different basin absorbents
K.W. Yusof, A. Riahi, N. Sapari, M.H. Isa, N.A.M. Zahari, E. Olisa, K.M. Khouna & B.S.M. Singh
Artificial neural network approach for modeling of Cd (II) adsorption from aqueous solution by incinerated rice husk carbon
T. Khan, M.H. Isa & M.R. Mustafa
Implementation of attached growth system in Malaysia: An overview
G. Hayder, N.F.S.Bt. Mohamad Fu’ad & P.A./L. Perumulselum
Comparative study of polymeric adsorbent for copper removal from industrial effluents
S.M. Laghari, M.H. Isa, Z.M. Ali &A.J. Laghari
Analysis of mould growth contamination in library building
S.N.A.Wahab, N.I. Mohammed, M.F. Khamidi, Z.M. Noor & M. Ismail
Petroleum sludge thermal treatment and use in cement replacement – A solution towards sustainability
E.N. Pakpahan, N. Shafiq, M.H. Isa, S.R.M. Kutty & M.R. Mustafa
Residential landscape minimize indoor temperature in tropical climate: Myth or reality
N. Kamarulzaman, N.A. Zawawi & N.I. Mohammed
Enhancement of waste activated sludge disintegration and dewaterability by H2O2 oxidation
G.C. Heng, K.W. Chen & M.H. Isa
Application of integrated bioreactor system (i-SGBR) for simultaneous treatment of wastewater and excess sludge degradation
S.R.M. Kutty, N. Aminu, M.H. Isa & I.U. Salihi
Hydraulic assessment of grassed swale as bioengineered channel
M.M. Muhammad, K.W. Yusof, M.R. Mustafa &A.Ab. Ghani
Sulfide precipitation as treatment for iron rich groundwater
N. Sapari, H. Jusoh, E. Olisa & E.H. Ezechi
Climate change impact on water resources of Bakun hydroelectric plant in Sarawak, Malaysia
M.R. Mustafa, M. Hussain & K.W. Yusof
Investigation of the influence of particle size on the migration of DNAPL in unsaturated sand
M.Y.D. Alazaiza, S.K. Ngien, M.M. Bob & S.A. Kamaruddin
Comparison of support vector machines kernel functions for pore-water pressure modeling
N.M. Babangida, K.W. Yusof, M.R. Mustafa & M.H. Isa
Toxicological studies of Perak River water using biological assay
T.S. Abd Manan, A. Malakahmad & S. Sivapalan
Predicting CMIP5 monthly precipitation over Kuching using multilayer perceptron neural network
M. Hussain, K.W. Yusof & M.R. Mustafa
Drought analysis of Cheongmicheon in Korea based on various drought indices
K.J.Won, S.H. Kim, E.S. Chung, S.U. Kim & M.W. Son
Introduction of decision support system for design of LID based on SWMM5.1: A case study in Korea
J.Y. Song, E.S. Chung, S.H. Kim & S.-H. Lee
Geotechnical engineering and geoinformatics
Effects of tunnel face distance on surface settlement
A. Marto, H. Sohaei, M. Hajihassani &A.M. Makhtar
Characterization of Pb and Cd contaminated sandy soil by dielectric means
H.M. Al-Mattarneh, R.M.A. Ismail, M.F. Nuruddin, N. Shafiq & M.A. Dahim
Microbially induced cementation to improve the strength of residual soil
M. Umar, K.A. Kassim & Z. Ibrahim
The behaviour of electrical resistivity correlated with converted SPT-N results from seismic survey
S.B. Syed Osman, H. Jusoh & K. Chai
Development of new distributed optical fibre sensor as borehole extensometer
H. Mohamad
Pile set up investigation for improvement on pile capacity
I.S.H. Harahap & L.C. Fai
Feasibility study of P-wave monitoring of selective bioplugging caused by biofilms
D.-H. Noh &T.-H. Kwon
Prioritizing the criteria for urban green space using AHP-multiple criteria decision model
R. Ahmad &A.N. Matori
Effects of DEMs from different sources in deriving stream networks threshold values
N.A. Ishak, M.S.S. Ahamad, S.K.M. Abujayyab &A.Ab. Ghani
Spatial compliances study of present landfill siting to Malaysian standard
S.Z. Ahmad, M.S.S. Ahamad, S.K.M. Abujayyab, M.S. Yusoff & N.Q. Omar
Monitoring deformation of liquefied natural gas terminal with persistent scatterer interferometry
A.S. Ab Latip, A.N. Matori & D. Perissin
Highway and transportation engineering
An evaluation of 85th operating speed and posted speed limit based on horizontal, vertical alignments and traffic conditions: Case study of two lane urban roadway
A.M.A. Bakar, M.S.N.A. Rani, R. Mohamed, N.S. Sani, N. Jalal, M.A. Adnan &T.B.H.B.T. Besar
Mechanical performance of temperature reduced mastic asphalt
M. Dimitrov & B. Hofko
Influence of factors to shift private transport users to Park-and-Ride service in Putrajaya
I.A. Memon, M. Napiah, M.A. Hussain & M.R. Hakro
Statistical interpretations about the use of footbridges by diverse groups of pedestrians in Malaysia
R. Hasan & M. Napiah
Physical and storage stability properties of linear low density polyethylene at optimum content
N. Bala & I. Kamaruddin
Feasibility of reclaimed asphalt pavement in rigid pavement construction
G.D. Ransinchung.R.N, S. Singh & S.M. Abraham
Optimal maintenance planning for Trans-West Africa coastal highway infrastructure using HDM-4
O. Oloruntobi, N. Madzlan, K. Ibrahim & O. Johnson
The effect of water on the performance of polymer fibre-reinforced road bituminous mixtures
I. Kamaruddin, M. Napiah & M.H. Nahi
Structures and materials
3D nonlinear finite element analysis of HPFRC beams containing PVA fibers
N. Shafiq, T. Ayub & S.U. Khan
Displacement-based design for precast post-tensioned segmental columns with different aspect ratios
E. Nikbakht & M.S. Mahzabin
Carbon emission analysis of double storey reinforced concrete house in Malaysia
M.S.A. Hamid, N. Shafiq, N.A. Zawawi, M.F. Nuruddin, M.F. Khamidi & M.S.H.M. Shaharmi
Addition of natural lime in incinerated sewage sludge ash concrete
T.Y. Yu, D.S. Ing & C.S. Choo
Properties and structural behavior of sawdust interlocking bricks
B.S. Mohammed, M. Aswin &Vethamoorty
Development of nano silica modified solid rubbercrete bricks
N. Mahamood, B.S. Mohammed, N. Shafiq & S.M.B. Eisa
Analysis layers method of strengthening reinforced concrete T-beams wire rope moment negative (attention reinforcement slab)
D.L.C. Galuh & H.P. Riharjo
Concrete panel from polystyrene waste
D. Sulistyorini & I. Yasin
Fault tree analysis for reinforced concrete highway bridge defect
W.S.Wan Salim, M.S. Liew &A. Shafie
Effect of high volume fly ash in ultra high performance concrete on compressive strength
N.M. Azmee & M.F. Nuruddin
Behaviour of structural properties of fiber reinforced high strength concrete beams subjected to static loads
N. Shafiq, M.F. Nuruddin &A.E.A. Elshekh
Single strap pull test of carbon fibre reinforced polymer plated steel member under fatigue loading
N. Osman, A.Y.M. Yassin & I. Akbar
Experimental study for stepped reinforcement concrete beams
M.A. Hussain & N. Safiq
Nano silica modified roller compacted rubbercrete – An overview
M. Adamu, B.S. Mohammed & N. Shafiq
Contribution of natural pozzolan to sustainability of well cements for oil and gas industry
A. Talah, F. Kharchi & R. Chaid
Costs of urbanization and its impacts on the urban density
B. El Kechebour & S. Haddad
Numerical study on shear and normal stress variation of RC wall with L shaped section
A. Ahmed-Chaouch
Effects of alkaline solution on the microstructure of HCFA geopolymers
M.F. Nuruddin, A.B. Malkawi, A. Fauzi, B.S. Mohammed & H.M. Al-Mattarneh
Influence of pozzolan on sulfate resistance of concrete
A. Merida & F. Kharchi
Presentation of a helping tool for the sizing and the optimization of ‘beam’ in reinforced concrete
A. Boukhaled & F. Mendaci
Sustainable waste management of bottom ash as cement replacement in green building
N.L.B.M. Kamal, G. Hayder, O.A. Ahmed, S.B. Beddu, M.F. Nuruddin & N. Shafiq
Numerical analysis of the composite “ball-and-socket” carcass design for unbonded flexible pipe
A.F. Billah, Z. Mustaffa & B.T.M.B. Albarody
Milling time influence of ultrafine treated rice husk ash to pozzolanic reactivity in portlandite
M.F. Nuruddin, S.A. Saad, N. Shafiq & M. Ali
Mix design proportion for strength prediction of rubbercrete using artificial neural network
A. Awang, B.S. Mohammed & M.R. Mustafa
Roof insulation material from low density polyethylene (LDPE), kapok fibre and silica aerogel
N.H.A. Puad, M.F. Nuruddin, J.J. Lian & I. Othman
Application of new codes for fatigue assessment of older bridges
A.Q. Ayilara, T.Wee & M.S. Liew

Descriere

This book contains the contributions to the 3rd International Conference on Civil, Offshore & Environmental Engineering.