Green Design, Materials and Manufacturing Processes
Editat de Helena Bartolo, Paulo Jorge Da Silva Bartolo, Nuno Manuel Fernandes Alves, Artur Jorge Mateus, Henrique Amorim Almeida, Ana Cristina Soares Lemos, Flávio Craveiro, Carina Ramos, Igor Reis, Lina Durão, Telma Ferreira, José Pinto Duarte, Filipa Roseta, Eduardo Castro e Costa, Filipe Quaresma, João Paulouro Nevesen Limba Engleză Hardback – 6 iun 2013
Green Design, Materials and Manufacturing Processes includes essential research in the field of sustainable intelligent manufacturing and related topics, making a significant contribution to further development of these fields. The volume contains reviewed papers presented at the 2nd International Conference on Sustainable Intelligent Manufacturing, conjointly organized by the Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, and the Faculty of Architecture, Technical University of Lisbon, both in Portugal. This event was held at the facilities of the Faculty of Architecture, Lisbon, from June 26 to June 29, 2013. A wide range of topics is covered, such as Eco Design and Innovation, Energy Efficiency, Green and Smart Manufacturing, Green Transportation, Life-Cycle Engineering, Renewable Energy Technologies, Reuse and Recycling Techniques, Smart Design, Smart Materials, Sustainable Business Models and Sustainable Construction.
Green Design, Materials and Manufacturing Processes is intended for engineers, architects, designers, economists and manufacturers who are actively engaged in the advancement of science and technology regarding key sustainability issues, leading to more suitable, efficient and sustainable products, materials and processes.
Preț: 447.13 lei
Preț vechi: 564.29 lei
-21% Nou
Puncte Express: 671
Preț estimativ în valută:
85.59€ • 89.74$ • 70.71£
85.59€ • 89.74$ • 70.71£
Carte tipărită la comandă
Livrare economică 29 ianuarie-12 februarie 25
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9781138000469
ISBN-10: 1138000469
Pagini: 792
Dimensiuni: 174 x 246 x 246 mm
Greutate: 1.56 kg
Ediția:New.
Editura: Routledge
Colecția CRC Press
ISBN-10: 1138000469
Pagini: 792
Dimensiuni: 174 x 246 x 246 mm
Greutate: 1.56 kg
Ediția:New.
Editura: Routledge
Colecția CRC Press
V-ar putea interesa
-
Practical Reliability Engineering 5ePDT O′Connor-20%Preț: 431.31 lei539.13 lei -
-11%Preț: 674.27 lei757.61 lei -
Accelerated Testing and ValidationAlex Porter-25%Preț: 392.82 lei524.34 lei -
Audel Machine Shop Basics 5eMR MillerPreț: 236.12 lei -
-9%Preț: 686.46 lei754.35 lei -
-9%Preț: 958.89 lei1053.73 lei -
-9%Preț: 960.65 lei1055.65 lei
Public țintă
ProfessionalCuprins
Eco design and innovation
New visions in the manufacturing design—jewels as multiples
C. Scarpitti
Communicating effectively in writing: Issues and strategies for engineers
L. Nazarenko & G. Schwarz-Peaker
Sustainable design for furniture and wood products
P. Browne & P. Tobin
Door’s design for people with mobility impairments and service dogs
C.P. Carvalho, A.B. Magalhães, J.B. Pedro & L. de Sousa
Self-building process: Living the crisis in a sustainable way
F. Pugnaloni, E. Bellu & M. Giovanelli
Eco-design concept manual as a web tool to reduce the impact of a product
on the environment
Z. Toncíková
The meaning of public spaces
M. Hanzl
Designing innovation with craft-evolution to develop sustainability
E. Aparo, L. Soares & H. Santos-Rodrigues
In direction to sustainable eco resorts
C. Alho & J.C. Pina
Disruptive innovation and learning to create architectural forms
L.S. Leite, A.T.C. Pereira & R. Pupo
Additive manufacturing as a social inclusion tool
G.M. Bem, R.T. Pupo & A.T.C. Pereira
The Olivetti factory as a paradigm of sustainable growth
F. Castanò & A. Gallo
Avieiro Boat — its recovery as a strategic factor for a sustainable development process
C. Barbosa
Patterns of sustainability in textile design use of traditional technologies
A. Rusu
A visual impaired children photography’s catalogue as an inclusive tool
A.P.P. Demarchi, B.M. Rizardi, G. Pires & C.B.R. Fornasier
Back to craft
E. Karanastasi, M. Moelee, S. Alexopoulou, M. Kardarakou, M. Nikolakaki, A. Papadopoulou, X. Papatriantafyllou & A. Terezaki
Urban Nomads—smart and flexible design strategies for a sustainable future
N. Loeper & M. Ott
Energy efficiency
Daylighting and ventilation in energy efficient factories
K. Klimke, T. Rössel, P. Vohlidka & H. Riemer
Improving sustainability in healthcare with better space design quality
M.F. Castro, R. Mateus & L. Bragança
A linear reciprocating thermomagnetic motor powered by water heated
using solar energy 107
L.D.R. Ferreira, C.V.X. Bessa, I. Silva & S. Gama
Environmental quickscans as a decision supporting tool: Scanning the embodied
energy of different fibre treatments in the development of biocomposite building products
E.E. Keijzer
A bottom-up perspective upon climate change—approaches towards the local scale
and microclimatic assessment
A. Santos Nouri
Energy price differential and industrial production growth in Mexico: A wavelet approach
G.S. Uddin, S. Chakraborty, R. Hossian & B. Sjö
Electrical energy analysis and potential environmental improvements of sheet metal punching processes
G. Ingarao, K. Kellens, R. Renaldi, W. Dewulf & J.R. Duflou
Prototypelab 2012: Mass-customization of energy self-sufficient prototypes and less environmental impact through improved parametric tools, sensors and CNC technology
J. Ballesteros & P. Ferreiro
Energy utilization and output dynamics in Bangladesh
G.S. Uddin, S. Razin, A.T. Muzaffar & P. Kyophilavong
Spectral shifters for an enhanced indoor environment 149
G.R. Mitchell & F.J. Davis
Optimalmould: Energy consumption in injection moulding optimization
C. Ramos, P. Carreira, P. Bártolo, I. Reis, L. Durão & N. Alves
Green and smart manufacturing
Sustainable work for human centred manufacturing
M. Santochi & F. Failli
Influencing variables on sustainability in additive manufacturing
S. Junk & S. Côté
Compressed air system assessment for machine tool monitoring
A. Gontarz, P. Bosshard, K. Wegener & L. Weiss
Crop rotation and association design for N budgeting in organic dairy farms
G. Bukvic, R. Gantner, Z. Steiner & K. Karalic
Environmental aspects of lightweight construction in mobility and manufacturing
S. Albrecht, M. Baumann, C.P. Brandstetter, R. Horn, H. Krieg, M. Fischer & R. Ilg
A step towards sustainable machining through increasing the cutting tool utilization
F. Schultheiss, J.M. Zhou, E. Gröntoft & J.-E. Ståhl
Natural aspect of sustainable food and cosmetics manufacturing
K. Kyriakopoulou, S. Papadaki & M. Krokida
Cobalt and manganese recovery from spent industrial catalysts by hydrometallurgy
D. Fontana & F. Forte
Strategic sustainability through a product development tool
P.K. Saha
Set up planning for automatic generation of inspection plan
E.A. Nasr, A. Al-Ahmari, O. Abdulhameed & S.H. Mian
Intelligent fixture planning system for prismatic parts
A. Al-Ahmari, E.A. Nasr, A.A. Khan & A. Kamrani
A study of injection moulding with bismuth alloy
A. Kus, E. Unver, B. Jagger & I. Durgun
Automated feature extraction from cylindrical parts based on STEP
H.M.A. Hussein, E.A. Nasr & A. Khan
Computer aided feature recognition in free form parts
H.M.A. Hussein & H.M. Mousa
Package design for frozen foods—principles for sustainability
R.A. Delfino, L.C. Paschoarelli & R. Frazão
Synthetic manufacturing—Resilient Modular Systems (RMS)
W.W. Fok
System-based analysis of environmental effects of liquid food packaging
Zs. Bogóné-Tóth & Z. Lakner
Green transportation
An innovative six sigma and lean manufacturing approach for environmental friendly shipyard
L. Bilgili, D. Deli & U.B. Celebi
Life cycle assessment approach of waste management for ship operation
L. Bilgili & U.B. Celebi
An innovative method establishment for a green shipyard concept
L. Bilgili & U.B. Celebi
Social sustainability: A key concern for the recovery of urban roads
A. Annunziata
Recovery of roads in urban areas: From an indistinct feature to a specific function
A. Annunziata & F. Annunziata
Systematic approach of upscaling aircraft parts and sub-modules to aircraft level
R. Ilg
Modeling complex aviation systems—the Eco-Design tool EcoSky
R. Ilg
New York City blue network: Water as liquid state of earth
M. Louro & F. Oliveira
Life-cycle engineering
Environmental management and use of the water in Food Service Segment: The Life Cycle Assessment as a tool for a sustainable development
M.S. Lourenço, S.R.R. Costa, M.L. Nunes, L.S. Xavier & J.A.A. Peixoto
Life-cycle management of high-performance and sustainable buildings based on enterprise modeling method
Y.M. Shao
Manufacturing renaissance: Return of manufacturing to western countries
B. Kianian, T.C. Larsson & M.H. Tavassoli
Process chain analysis of lightweight metal components—a case study
R. Ilg & D. Wehner
Objective monetization of environmental impacts
H. Krieg, S. Albrecht, M. Jäger & J. Gantner
Assessment tool for building materials
S. Vasconcelos, C. Alho & B. Müller
Set up of a European LCA building rating methodology within the open house project
J. Gantner, K. Lenz & H. Krieg
Evaluating the impact of glass and PET packaging for bottled water
H.A. Almeida, C.A. Ramos, H. Bártolo & P.J. Bártolo
Renewable energy technologies
Analysis of the ethanol production chain in the State of Rio Grande do Sul, Brazil: A study based on system’s dynamics with a view for exploring scenarios
A. Longhi, G.L.R. Vaccaro, T. Fleck, K. Roos, D.C. Azevedo & M.H.C. Moutinho
Use of Jathropha biomass for adsorption of glyphosate in water
H. Nacke, A.C. Gonçalves Jr., D. Schwantes, G.F. Coelho, M.R. Silva & A. Pinheiro
Removal of cadmium from aqueous solutions by adsorption on Jatropha biomass
H. Nacke, A.C. Gonçalves Jr., G.F. Coelho, L. Strey, D. Schwantes & A. Laufer
Guidelines for redesign a commercially available product: The case of a split air conditioning unit
P.N. Botsaris
To develop a framework for the implementation of Miscanthus-fuelled ESCOs for non-domestic heat in Ireland—state of the art report
E. Stilwell & D. O’Sullivan
Modeling of multi-assortment production of CO2-extracts
E.P. Koshevoy, V.S. Kosachev, V.U. Chundyshko & N.N. Latin
Natural ventilation potential on thermal comfort of a light-steel-framing residential building
A. Craveiro, A. Gameiro Lopes, P. Santos & L.S. da Silva
Investigation of the feasibility of constructing a biofuel plant in the region of North Evros
A.N. Papadopoulos & M. Tsatiris
Comparison of working (operating) efficiency of electric and gas heat pump regarding to renewable heat source
D. Rajkovic & M. Sentic
System of thermal energy accumulation in a soil layer in a combination with wind energy
A.V. Bunyakin
Reuse and recycling techniques
Design of experimental composting of animal carcasses in universitary unit of treatment aimed a correct final disposition and soil improve
J.C.L. Fonseca, M.R.R. Marchi, L.T. Braz, A.A. Cecílio & L.V.S. Sacramento
Kinetics, equilibrium and thermodynamics of the adsorption process of lead using cassava industry wastes
D. Schwantes, A.C. Gonçalves Jr., L. Strey, V. Schwantes & H. Nacke
Equilibrium of the adsorption process of glyphosate using wastes from the cassava industry
D. Schwantes, A.C. Gonçalves Jr., G.F. Coelho, J. Casarin, J.R. Stangarlin & A. Pinheiro
Use of bark of Pinus elliottii as a biosorbent in the removal of glyphosate from aqueous solutions
L. Strey, A.C. Gonçalves Jr., G. Coelho, D. Schwantes, H. Nacke & C.R.T. Tarley
Kinetics, equilibrium and thermodynamics of cadmium adsorption by a biosorbent from the bark of Pinus elliottii
L. Strey, A.C. Gonçalves Jr., D. Schwantes, G.F. Coelho, H. Nacke & D.C. Dragunski
Adaptation of the creativity tool ASIT to support eco-ideation phases
B. Tyl, J. Legardeur, D. Millet & F. Vallet
Reducing packaging waste by GIS applications
A. Horváth, Á. Mojzes & G. Takács
EIA implementation and follow up: A case study of Koga irrigation project—Ethiopia
W.B. Abebe & M. McCartney
Waste prevention and reuse of synthetic textiles: A case study in a Brazilian garment industry
I.S.B. Martins, C.P. Sampaio & U. Perez
Controlling the properties of materials manufactured using recycled PVC
C.M. Pratt, F.J. Davis & G.R. Mitchell
Smart design
Mass customization of ceramic tableware through digital technology
E. Castro e Costa & J.P. Duarte
Robotically controlled fiber-based manufacturing as case study for biomimetic digital fabrication
N. Oxman, M. Kayser, J. Laucks & M. Firstenberg
Freeform 3D printing: Towards a sustainable approach to additive manufacturing
N. Oxman, J. Laucks, M. Kayser, E. Tsai & M. Firstenberg
How to design smart-buildings without smart-people?
M.-C. Zélem
An irregular discretization process for climate-responsive façades
E. Vermisso, M. Thitisawat & M. Feldsberg
Designing a sustainable and healthy living environment with smart technology
J.H. Lan
Climate change adaptation and strategies: An overview
A. Santos Nouri & M. Matos Silva
Digital fabrication and rapid prototyping as a generative process
F. Coutinho, M. Kruger & J.P. Duarte
Architectural fabrication of tensile structures with flying machines
A. Mirjan, F. Gramazio, M. Kohler, F. Augugliaro & R. D’Andrea
Space time information on display: Smart devices and spatial cognition
D.P. Henriques
Fabricating selective elasticity
M.P. Gutierrez
Digital manufacture: Robotic CAD/CAM protocol for low cost housing
V. Portugal
The haptic/visual image as an inclusive tool
A.P.P. Demarchi, B.S. Pozzi & C.B.R. Fornasier
The limits of inclusive design in the current design practice
E. Zitkus, P. Langdon & P.J. Clarkson
Rapid construction with functionally graded designs
F. Craveiro, H. Almeida, L. Durão, H. Bártolo & P. Bártolo
Smart materials
New patent on nanomaterials for preserving stone and wood structures
S. Di Salvo
Transparent and sustainable materials
A. Lanza Volpe
Photocatalytic degradation of textile effluent using ZnO/NaX and ZnO/AC under solar radiation
T.M.P. Schimidt, F.R. Soares, V. Slusarski-Santana, F.F. Brites-Nóbrega & N.R.C. Fernandes-Machado
Comparison of residue of cassava industry modified and “in natura” for adsorption of methylene blue dye
R.B. Pardinho, J. Caetano, J. Casarin, A.C. Gonçalves Jr., L.F. Bonfim Jr. & D.C. Dragunski
Use of films based starch and casein for conservation of guavas (Psidium guajava)
L.F. Bonfim Jr., A.R. Lopes, D.C. Dragunski, J. Casarin, A.C. Gonçalves Jr. & J. Caetano
Biomimetic materials for design
L. Pietroni & J. Mascitti
Particle model for orange peel pyrolysis
J.A. Rodríguez, J.A. Loredo & R.C. Miranda
Advanced smart polymer/nanographite composites for environmental pollution control
M. Knite, J. Zavickis, G. Sakale, K. Ozols & A. Linarts
Behavior of high strength concrete with raw rice husk exposed to high temperature effect
B. Ucarkosar, N. Yuzer & N. Kabay
Novel plastics for sustainable building design
G.R. Mitchell
Phase change materials as a tool for climate change mitigation
A.P. Viera, H. Bártolo, G.R. Mitchell & P. Bártolo
Sustainable business models
Assessment of the costs and benefits of environmental investment
M.E. Hussein, G.S. Seow & K. Tam
Managerial decision support tools for sustainable actions
M. Dolinsky & V. Dolinska
Exploring Green IT and Green IS: Insights from a case study in Brazil
T.A. Viaro & G.L.R. Vaccaro
Sustainable supply chain and collaboration: What is the link and what are the benefits?
Y. Dwi, I. Nouaouri, H. Allaoui & G. Goncalves
Collaborative actions, technology and smart design
I.S.L. Xavier & P.J. Silva Junior
Eco-efficiency in six small and medium enterprises in Mexico
L. Iturbide, P. Lozoya & P. Baptista
A method to select best nuggets from eco-innovation sessions
F. Vallet, B. Tyl, D. Millet & B. Eynard
Implementing concurrent engineering in the construction industry: A different approach for a better consideration of users
X. Latortue & S. Minel
Sustainable supply chain management: A systematic literature review about sustainable practices taken by focal companies
A.M. Nascimento & R.L.C. Alcantara
Multi-criteria evaluation of reaction to the economic recession in modernization of multi-apartment buildings
L. Kelpsiene & M.L. Matuseviciene
Integrated environmental and economic assessment in the construction sector
H. Krieg, S. Albrecht, J. Gantner & W. Fawcett
Sustainable development and business: Past and Future
M. Lešcevica
Corporate sustainability measurement in Portuguese manufacturing organizations
P. Mamede & C.F. Gomes
An economic approach on the urban development of squatter settlements in hillsides high-risk areas
S.R. Soares & S.T. Moraes
Secure e-Manufacturing: Here there and everywhere
D. Meehan
Parametric places 22@: Smart urban analysis tools and place branding value
P. Speranza
Sustainable construction
Sustainable design of prefabricated solutions for the rehabilitation of ancient buildings
A.C. Coelho, J.M. Branco, P.B. Lourenço & H. Gervásio
Smart Technology for the passive house
S. Vattano
On-demand post-disaster emergency shelters
M. Tafahomi
Towards zero energy house integrated design: Parametric formwork for capillary
systems in precast concrete panels
C. Beorkrem & M. Azarbayjani
Architectural rehabilitation and NZEB: The expansion of the Library of FDUL
A.P. Pinheiro
New paradigms in post-hydrological disaster shelter practice; hydrological disasters & informal urban settlements - an insoluble problem?
J. Lacey & A. Read
Improving urban environment with green roofs
G. Darázs & I. Hajdu
Self-sustaining home: Design liaises technology
J.-M. Werner
Harnessing advances in eco-innovation to achieve resource efficient cities
P. Vandergert, S. Sandland, D. Newport & P. van den Abeele
Opportunity to complement Vitoria-Gasteiz’s green network, using the roofs of public facility buildings
E.B. Carmona
3 Scales of repurposed disposability—Construction, Renovation, and Demolition (CRD)
W.W. Fok
New visions in the manufacturing design—jewels as multiples
C. Scarpitti
Communicating effectively in writing: Issues and strategies for engineers
L. Nazarenko & G. Schwarz-Peaker
Sustainable design for furniture and wood products
P. Browne & P. Tobin
Door’s design for people with mobility impairments and service dogs
C.P. Carvalho, A.B. Magalhães, J.B. Pedro & L. de Sousa
Self-building process: Living the crisis in a sustainable way
F. Pugnaloni, E. Bellu & M. Giovanelli
Eco-design concept manual as a web tool to reduce the impact of a product
on the environment
Z. Toncíková
The meaning of public spaces
M. Hanzl
Designing innovation with craft-evolution to develop sustainability
E. Aparo, L. Soares & H. Santos-Rodrigues
In direction to sustainable eco resorts
C. Alho & J.C. Pina
Disruptive innovation and learning to create architectural forms
L.S. Leite, A.T.C. Pereira & R. Pupo
Additive manufacturing as a social inclusion tool
G.M. Bem, R.T. Pupo & A.T.C. Pereira
The Olivetti factory as a paradigm of sustainable growth
F. Castanò & A. Gallo
Avieiro Boat — its recovery as a strategic factor for a sustainable development process
C. Barbosa
Patterns of sustainability in textile design use of traditional technologies
A. Rusu
A visual impaired children photography’s catalogue as an inclusive tool
A.P.P. Demarchi, B.M. Rizardi, G. Pires & C.B.R. Fornasier
Back to craft
E. Karanastasi, M. Moelee, S. Alexopoulou, M. Kardarakou, M. Nikolakaki, A. Papadopoulou, X. Papatriantafyllou & A. Terezaki
Urban Nomads—smart and flexible design strategies for a sustainable future
N. Loeper & M. Ott
Energy efficiency
Daylighting and ventilation in energy efficient factories
K. Klimke, T. Rössel, P. Vohlidka & H. Riemer
Improving sustainability in healthcare with better space design quality
M.F. Castro, R. Mateus & L. Bragança
A linear reciprocating thermomagnetic motor powered by water heated
using solar energy 107
L.D.R. Ferreira, C.V.X. Bessa, I. Silva & S. Gama
Environmental quickscans as a decision supporting tool: Scanning the embodied
energy of different fibre treatments in the development of biocomposite building products
E.E. Keijzer
A bottom-up perspective upon climate change—approaches towards the local scale
and microclimatic assessment
A. Santos Nouri
Energy price differential and industrial production growth in Mexico: A wavelet approach
G.S. Uddin, S. Chakraborty, R. Hossian & B. Sjö
Electrical energy analysis and potential environmental improvements of sheet metal punching processes
G. Ingarao, K. Kellens, R. Renaldi, W. Dewulf & J.R. Duflou
Prototypelab 2012: Mass-customization of energy self-sufficient prototypes and less environmental impact through improved parametric tools, sensors and CNC technology
J. Ballesteros & P. Ferreiro
Energy utilization and output dynamics in Bangladesh
G.S. Uddin, S. Razin, A.T. Muzaffar & P. Kyophilavong
Spectral shifters for an enhanced indoor environment 149
G.R. Mitchell & F.J. Davis
Optimalmould: Energy consumption in injection moulding optimization
C. Ramos, P. Carreira, P. Bártolo, I. Reis, L. Durão & N. Alves
Green and smart manufacturing
Sustainable work for human centred manufacturing
M. Santochi & F. Failli
Influencing variables on sustainability in additive manufacturing
S. Junk & S. Côté
Compressed air system assessment for machine tool monitoring
A. Gontarz, P. Bosshard, K. Wegener & L. Weiss
Crop rotation and association design for N budgeting in organic dairy farms
G. Bukvic, R. Gantner, Z. Steiner & K. Karalic
Environmental aspects of lightweight construction in mobility and manufacturing
S. Albrecht, M. Baumann, C.P. Brandstetter, R. Horn, H. Krieg, M. Fischer & R. Ilg
A step towards sustainable machining through increasing the cutting tool utilization
F. Schultheiss, J.M. Zhou, E. Gröntoft & J.-E. Ståhl
Natural aspect of sustainable food and cosmetics manufacturing
K. Kyriakopoulou, S. Papadaki & M. Krokida
Cobalt and manganese recovery from spent industrial catalysts by hydrometallurgy
D. Fontana & F. Forte
Strategic sustainability through a product development tool
P.K. Saha
Set up planning for automatic generation of inspection plan
E.A. Nasr, A. Al-Ahmari, O. Abdulhameed & S.H. Mian
Intelligent fixture planning system for prismatic parts
A. Al-Ahmari, E.A. Nasr, A.A. Khan & A. Kamrani
A study of injection moulding with bismuth alloy
A. Kus, E. Unver, B. Jagger & I. Durgun
Automated feature extraction from cylindrical parts based on STEP
H.M.A. Hussein, E.A. Nasr & A. Khan
Computer aided feature recognition in free form parts
H.M.A. Hussein & H.M. Mousa
Package design for frozen foods—principles for sustainability
R.A. Delfino, L.C. Paschoarelli & R. Frazão
Synthetic manufacturing—Resilient Modular Systems (RMS)
W.W. Fok
System-based analysis of environmental effects of liquid food packaging
Zs. Bogóné-Tóth & Z. Lakner
Green transportation
An innovative six sigma and lean manufacturing approach for environmental friendly shipyard
L. Bilgili, D. Deli & U.B. Celebi
Life cycle assessment approach of waste management for ship operation
L. Bilgili & U.B. Celebi
An innovative method establishment for a green shipyard concept
L. Bilgili & U.B. Celebi
Social sustainability: A key concern for the recovery of urban roads
A. Annunziata
Recovery of roads in urban areas: From an indistinct feature to a specific function
A. Annunziata & F. Annunziata
Systematic approach of upscaling aircraft parts and sub-modules to aircraft level
R. Ilg
Modeling complex aviation systems—the Eco-Design tool EcoSky
R. Ilg
New York City blue network: Water as liquid state of earth
M. Louro & F. Oliveira
Life-cycle engineering
Environmental management and use of the water in Food Service Segment: The Life Cycle Assessment as a tool for a sustainable development
M.S. Lourenço, S.R.R. Costa, M.L. Nunes, L.S. Xavier & J.A.A. Peixoto
Life-cycle management of high-performance and sustainable buildings based on enterprise modeling method
Y.M. Shao
Manufacturing renaissance: Return of manufacturing to western countries
B. Kianian, T.C. Larsson & M.H. Tavassoli
Process chain analysis of lightweight metal components—a case study
R. Ilg & D. Wehner
Objective monetization of environmental impacts
H. Krieg, S. Albrecht, M. Jäger & J. Gantner
Assessment tool for building materials
S. Vasconcelos, C. Alho & B. Müller
Set up of a European LCA building rating methodology within the open house project
J. Gantner, K. Lenz & H. Krieg
Evaluating the impact of glass and PET packaging for bottled water
H.A. Almeida, C.A. Ramos, H. Bártolo & P.J. Bártolo
Renewable energy technologies
Analysis of the ethanol production chain in the State of Rio Grande do Sul, Brazil: A study based on system’s dynamics with a view for exploring scenarios
A. Longhi, G.L.R. Vaccaro, T. Fleck, K. Roos, D.C. Azevedo & M.H.C. Moutinho
Use of Jathropha biomass for adsorption of glyphosate in water
H. Nacke, A.C. Gonçalves Jr., D. Schwantes, G.F. Coelho, M.R. Silva & A. Pinheiro
Removal of cadmium from aqueous solutions by adsorption on Jatropha biomass
H. Nacke, A.C. Gonçalves Jr., G.F. Coelho, L. Strey, D. Schwantes & A. Laufer
Guidelines for redesign a commercially available product: The case of a split air conditioning unit
P.N. Botsaris
To develop a framework for the implementation of Miscanthus-fuelled ESCOs for non-domestic heat in Ireland—state of the art report
E. Stilwell & D. O’Sullivan
Modeling of multi-assortment production of CO2-extracts
E.P. Koshevoy, V.S. Kosachev, V.U. Chundyshko & N.N. Latin
Natural ventilation potential on thermal comfort of a light-steel-framing residential building
A. Craveiro, A. Gameiro Lopes, P. Santos & L.S. da Silva
Investigation of the feasibility of constructing a biofuel plant in the region of North Evros
A.N. Papadopoulos & M. Tsatiris
Comparison of working (operating) efficiency of electric and gas heat pump regarding to renewable heat source
D. Rajkovic & M. Sentic
System of thermal energy accumulation in a soil layer in a combination with wind energy
A.V. Bunyakin
Reuse and recycling techniques
Design of experimental composting of animal carcasses in universitary unit of treatment aimed a correct final disposition and soil improve
J.C.L. Fonseca, M.R.R. Marchi, L.T. Braz, A.A. Cecílio & L.V.S. Sacramento
Kinetics, equilibrium and thermodynamics of the adsorption process of lead using cassava industry wastes
D. Schwantes, A.C. Gonçalves Jr., L. Strey, V. Schwantes & H. Nacke
Equilibrium of the adsorption process of glyphosate using wastes from the cassava industry
D. Schwantes, A.C. Gonçalves Jr., G.F. Coelho, J. Casarin, J.R. Stangarlin & A. Pinheiro
Use of bark of Pinus elliottii as a biosorbent in the removal of glyphosate from aqueous solutions
L. Strey, A.C. Gonçalves Jr., G. Coelho, D. Schwantes, H. Nacke & C.R.T. Tarley
Kinetics, equilibrium and thermodynamics of cadmium adsorption by a biosorbent from the bark of Pinus elliottii
L. Strey, A.C. Gonçalves Jr., D. Schwantes, G.F. Coelho, H. Nacke & D.C. Dragunski
Adaptation of the creativity tool ASIT to support eco-ideation phases
B. Tyl, J. Legardeur, D. Millet & F. Vallet
Reducing packaging waste by GIS applications
A. Horváth, Á. Mojzes & G. Takács
EIA implementation and follow up: A case study of Koga irrigation project—Ethiopia
W.B. Abebe & M. McCartney
Waste prevention and reuse of synthetic textiles: A case study in a Brazilian garment industry
I.S.B. Martins, C.P. Sampaio & U. Perez
Controlling the properties of materials manufactured using recycled PVC
C.M. Pratt, F.J. Davis & G.R. Mitchell
Smart design
Mass customization of ceramic tableware through digital technology
E. Castro e Costa & J.P. Duarte
Robotically controlled fiber-based manufacturing as case study for biomimetic digital fabrication
N. Oxman, M. Kayser, J. Laucks & M. Firstenberg
Freeform 3D printing: Towards a sustainable approach to additive manufacturing
N. Oxman, J. Laucks, M. Kayser, E. Tsai & M. Firstenberg
How to design smart-buildings without smart-people?
M.-C. Zélem
An irregular discretization process for climate-responsive façades
E. Vermisso, M. Thitisawat & M. Feldsberg
Designing a sustainable and healthy living environment with smart technology
J.H. Lan
Climate change adaptation and strategies: An overview
A. Santos Nouri & M. Matos Silva
Digital fabrication and rapid prototyping as a generative process
F. Coutinho, M. Kruger & J.P. Duarte
Architectural fabrication of tensile structures with flying machines
A. Mirjan, F. Gramazio, M. Kohler, F. Augugliaro & R. D’Andrea
Space time information on display: Smart devices and spatial cognition
D.P. Henriques
Fabricating selective elasticity
M.P. Gutierrez
Digital manufacture: Robotic CAD/CAM protocol for low cost housing
V. Portugal
The haptic/visual image as an inclusive tool
A.P.P. Demarchi, B.S. Pozzi & C.B.R. Fornasier
The limits of inclusive design in the current design practice
E. Zitkus, P. Langdon & P.J. Clarkson
Rapid construction with functionally graded designs
F. Craveiro, H. Almeida, L. Durão, H. Bártolo & P. Bártolo
Smart materials
New patent on nanomaterials for preserving stone and wood structures
S. Di Salvo
Transparent and sustainable materials
A. Lanza Volpe
Photocatalytic degradation of textile effluent using ZnO/NaX and ZnO/AC under solar radiation
T.M.P. Schimidt, F.R. Soares, V. Slusarski-Santana, F.F. Brites-Nóbrega & N.R.C. Fernandes-Machado
Comparison of residue of cassava industry modified and “in natura” for adsorption of methylene blue dye
R.B. Pardinho, J. Caetano, J. Casarin, A.C. Gonçalves Jr., L.F. Bonfim Jr. & D.C. Dragunski
Use of films based starch and casein for conservation of guavas (Psidium guajava)
L.F. Bonfim Jr., A.R. Lopes, D.C. Dragunski, J. Casarin, A.C. Gonçalves Jr. & J. Caetano
Biomimetic materials for design
L. Pietroni & J. Mascitti
Particle model for orange peel pyrolysis
J.A. Rodríguez, J.A. Loredo & R.C. Miranda
Advanced smart polymer/nanographite composites for environmental pollution control
M. Knite, J. Zavickis, G. Sakale, K. Ozols & A. Linarts
Behavior of high strength concrete with raw rice husk exposed to high temperature effect
B. Ucarkosar, N. Yuzer & N. Kabay
Novel plastics for sustainable building design
G.R. Mitchell
Phase change materials as a tool for climate change mitigation
A.P. Viera, H. Bártolo, G.R. Mitchell & P. Bártolo
Sustainable business models
Assessment of the costs and benefits of environmental investment
M.E. Hussein, G.S. Seow & K. Tam
Managerial decision support tools for sustainable actions
M. Dolinsky & V. Dolinska
Exploring Green IT and Green IS: Insights from a case study in Brazil
T.A. Viaro & G.L.R. Vaccaro
Sustainable supply chain and collaboration: What is the link and what are the benefits?
Y. Dwi, I. Nouaouri, H. Allaoui & G. Goncalves
Collaborative actions, technology and smart design
I.S.L. Xavier & P.J. Silva Junior
Eco-efficiency in six small and medium enterprises in Mexico
L. Iturbide, P. Lozoya & P. Baptista
A method to select best nuggets from eco-innovation sessions
F. Vallet, B. Tyl, D. Millet & B. Eynard
Implementing concurrent engineering in the construction industry: A different approach for a better consideration of users
X. Latortue & S. Minel
Sustainable supply chain management: A systematic literature review about sustainable practices taken by focal companies
A.M. Nascimento & R.L.C. Alcantara
Multi-criteria evaluation of reaction to the economic recession in modernization of multi-apartment buildings
L. Kelpsiene & M.L. Matuseviciene
Integrated environmental and economic assessment in the construction sector
H. Krieg, S. Albrecht, J. Gantner & W. Fawcett
Sustainable development and business: Past and Future
M. Lešcevica
Corporate sustainability measurement in Portuguese manufacturing organizations
P. Mamede & C.F. Gomes
An economic approach on the urban development of squatter settlements in hillsides high-risk areas
S.R. Soares & S.T. Moraes
Secure e-Manufacturing: Here there and everywhere
D. Meehan
Parametric places 22@: Smart urban analysis tools and place branding value
P. Speranza
Sustainable construction
Sustainable design of prefabricated solutions for the rehabilitation of ancient buildings
A.C. Coelho, J.M. Branco, P.B. Lourenço & H. Gervásio
Smart Technology for the passive house
S. Vattano
On-demand post-disaster emergency shelters
M. Tafahomi
Towards zero energy house integrated design: Parametric formwork for capillary
systems in precast concrete panels
C. Beorkrem & M. Azarbayjani
Architectural rehabilitation and NZEB: The expansion of the Library of FDUL
A.P. Pinheiro
New paradigms in post-hydrological disaster shelter practice; hydrological disasters & informal urban settlements - an insoluble problem?
J. Lacey & A. Read
Improving urban environment with green roofs
G. Darázs & I. Hajdu
Self-sustaining home: Design liaises technology
J.-M. Werner
Harnessing advances in eco-innovation to achieve resource efficient cities
P. Vandergert, S. Sandland, D. Newport & P. van den Abeele
Opportunity to complement Vitoria-Gasteiz’s green network, using the roofs of public facility buildings
E.B. Carmona
3 Scales of repurposed disposability—Construction, Renovation, and Demolition (CRD)
W.W. Fok
Notă biografică
Helena Bartolo Centre for Rapid and Sustainable Product Development, Polytecnic Institute of Leiria, Leiria, Portugal.
Descriere
This book includes essential research in the field of sustainable intelligent manufacturing and related topics, making a significant contribution to further development of these fields. The volume covers wide range of topics such as eco design and innovation, energy efficiency, green and smart manufacturing, green transportation, life-cycle engineering, renewable energy technologies, reuse and recycling techniques, smart design, smart materials, sustainable business models and sustainable construction.