Cantitate/Preț
Produs

Handbook of Ecomaterials

Editat de Leticia Myriam Torres Martínez, Oxana Vasilievna Kharissova, Boris Ildusovich Kharisov
en Limba Engleză Hardback – 28 feb 2019
In this handbook, the editors systematically present the maximum possible number of known eco-materials, including ”cyclic” materials; materials for ecology and environmental protection; materials for society and human health; and materials for energy based on two main criteria: their sources and their functions. Eco-materials (also called “environmentally friendly materials” or “environmentally preferable” materials) are materials that enhance, or refrain from damaging, the environment throughout their life cycles.
The chapters are written by global leaders in their fields. The book will cater to the strong and ever-increasing demand for energy, benign materials, and cost efficiency.  Eco-materials is arguably one of the most important fields of modern science & technology.   
Citește tot Restrânge

Preț: 287774 lei

Preț vechi: 359717 lei
-20% Nou

Puncte Express: 4317

Preț estimativ în valută:
55071 57753$ 45921£

Carte indisponibilă temporar

Doresc să fiu notificat când acest titlu va fi disponibil:

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319682549
ISBN-10: 3319682547
Pagini: 2400
Ilustrații: XLVIII, 3773 p. 1227 illus., 805 illus. in color. In 5 volumes, not available separately.
Dimensiuni: 155 x 235 mm
Greutate: 8.62 kg
Ediția:1st ed. 2019
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland

Cuprins

Nanomaterials, Ecomaterials, and Wide Vision of Material Science Environmental Impact Measurements: Tool and Techniques
Green Nanomaterials for Clean Environment
Synthesis Techniques for Preparation of Nanomaterials
Plant Materials for the Synthesis of Nanomaterials: Greener Sources
Processing and Characterization of Bio-Composites
Sustainable Advancement to the Synthesis of Oxadiazoles
Analytical Models for the Permeabilities of Fibrous Ecomaterials
Principles for Evaluations of Healthiness of New Materials
Nanomaterials for Industrial Wastewater Treatment and Water Purification
Nano-Geomaterials for Water Treatment Applications of Nanoparticles in the Treatment of Wastewater
Iron and Iron Oxide-Based Eco-Nanomaterials for Catalysis and Water Remediation
Partial Desalination of Saline Irrigation Water Using [FexOy(OH)z(H2O)m)n+/−]
Porous Materials Obtained from Nonconventional Sources Used in Wastewater Treatment Processes
Remediation of Water Contaminants
New Carbon Nanomaterials for Water Purification from Heavy Metals
Semiconductor Eco-Materials for Water Treatment
Composite Nanofibers for Removing Water Pollutants: Fabrication Techniques
Porous Nanomaterials for Heavy Metal Removal
Degradation of Pollutants Using Advanced Ecomaterials Novel Eco-friendly Mitigation Strategies for Managing Oil Spills and Municipal Waste Dump Site Leachates
Antimicrobial Activity of the Engineered Nanoparticles Used as Coating Agents
Algal Degradation of Organic Pollutants
TiO2/SiO2 Films for Removal of Volatile Organic Compounds (VOCs) from Indoor Air
Degradation of Volatile Organic Compounds with Catalysts-Containing Zeolite and Ordered Mesoporous Silica
CO2 Sequestration: Processes and Methodologies
CO2 Sequestration and Transformation Potential of Agricultural System
Efficient Utilization of Supercritical Carbon Dioxide as Both Reactant and Reaction Medium for Synthetic Applications
Energy Recovery from Solid Waste: Application of Gasification Technology Renewable Energy Sources: Regulations in the Russian Federation
Metal Hydrides for Energy Storage
Metal-Organic Frameworks (MOFs) Composited with Nanomaterials for Next-Generation Supercapacitive Energy Storage Devices
Nanocomposites for Structural and Energy Applications
Efficient, Sustainable, and Clean Energy Storage in Supercapacitors Using Biomass-Derived Carbon Materials
Nanofluids Containing Titanium Dioxide: Thermo-Physical Properties and Energy Saving Applications
Biomass Energy and Bio-solar Hybrid Energy Systems
Thin Film Hydrogen Storages
Hydrogen Storage Alloys: Types and Characteristics Thermoelectric power generation from waste heat
Ecomaterials in Solar Cell Design
Radiation-Resistant Solar Cells: Recent Updates and Future Prospective
Photovoltaic Materials
Advances in Polymer-Based Photovoltaic Cells: Review of Pioneering Materials, Design, and Device Physics
Optimization of Bulk Heterojunction Organic Photovoltaic Devices
Carbon Nanostructured Catalysts as High Efficient Materials for Low Temperature Fuel Cells
Renewable Bio-anodes for Microbial Fuel Cells
Alternative Fuels from Waste Products in Cement Industry
Green Energy Generation from Microbial Fuel Cells
Nanomaterials for the Selective Detection of Hydrogen at Trace Levels in the Ambient
Nanomaterials as Sensor for Hazardous Gas Detection
Polyaniline Synthesis and Its Wide-Range Sensor and Electronic Applications
Recent Advances and Techniques in the Hazardous Gases Detection
Conducting Polymer Composite-Based Sensors for Flexible Electronics
Nanocellulose: Insight into Health and Medical Applications
Nanocellulose
Cellulosic Biofuel: Technologies, Prospects, and Challenges
Development of Binderless Composites from Different Nonwood Lignocellulosic Materials: Overview
Eco-fibers in the Textile Industry
Sustainable Biopolymers in Textiles: An Overview
Eco-Materials in Textile Finishing
Eco-Fabrication of Nanomaterials for Multifunctional Textiles
Colored Cotton: Novel Eco-Friendly Textile Material for the Future
Environmental Friendly Textile Processing
Eco-friendly Denim Processing
Carbon Footprint on Denim Manufacturing
Clothing Swap: Gateway to Sustainable Eco-friendly Fashion
Environmental Photocatalysis/Photocatalytic Decontamination
Photocatalytic Decontamination in Pharmaceutical Effluent Treatment
Photocatalytic H2 Production and Carbon Dioxide Capture Using Metallurgical Slag and Slag-Derived Materials Nanostructured Catalysts in Vehicle Exhaust Control Systems
Catalytic and Photocatalytic Properties of Oxide Spinels
Waste-Porous-Based Materials as Supports of TiO2 Photocatalytic Coatings for Environmental Applications
Ecofriendly Nanomaterials for Sustainable Photocatalytic Decontamination of Organics and Bacteria
Hydrogen Generation Via Photoelectrochemical Splitting of Water
Engineering Two-Dimensional Transition Metal Dichalcogenide Electrocatalysts for Water Splitting Hydrogen Generation
Conventional and Renewable Energy-Based Hydrogen Production
Industrial Perennial Crops for a Post-Petroleum Materials Economy
Artificial Photosynthesis: An Approach for a Sustainable Future Eco-Friendly Materials for Chemical Products Manufacturing: Adhesives Derived from Biomass and Renewable Resources
Production of Biodiesel from Algae: An Update
Catalytic Upgrading of Bio-oil for Production of Drop-In Fuels
Bio-Based Nanoemulsions: An Eco-Safe Approach Towards the Eco-Toxicity Problem
Biomaterials Degradation and Bioabsorbability: Biomedical Potentials of Marine Enzymes
Nanotechnology in Food Packaging Applications: Barrier Materials, Antimicrobial Agents, Sensors, and Safety Assessment
Food Biopackaging Based on Chitosan
Wasteless Processing of Renewable Protein and Carbohydrate-Containing Waste into Consumer Goods
Construction Materials Reinforced with Natural Products
Construction Materials for the Urban Environment: Environmental Assessment of Life Cycle Performance
Recycled Materials and By-Products for Pavement Construction
Cement-Bonded Lignocellulosic Panel (CLP): A Promising Environmental Friendly Construction Material for Conservation of Forest Resources
Bio-Inspired Materials: Contribution of Biology to Energy Efficiency of Buildings
Thermal and Acoustic Building Insulations from Agricultural Wastes
Growth of Ecomaterials and Eco-efficiency in Major Metallic Structural Materials
Green Synthesis of Metal, Metal Oxide Nanoparticles, and Their Various Applications
Metrology for Metal Nanoparticles Silver Nanoparticles: Synthesis and Applications
Metal Oxide Nanomaterials for Environmental Applications
Nanostructured Calcium Phosphate-Based Bioceramics from Waste Materials
Nanopowdered h-BN as a Wear-Reducing Eco-Friendly Material
Nanoscale Clay Minerals for Functional Ecomaterials: Fabrication, Applications, and Future Trends
Ytterbium and Erbium Co-doped Rare-Earth Aluminum Borate Crystals as New Materials for Eye-Safe Lasers: Flux Growth and Characterization
Hierarchical MWW Zeolites by Soft and Hard Template Routes
Plasmonic Ecomaterials
Ecomaterials on Basis of Apatite
Electrochemical Synthesis of Coordination Compounds of Lanthanides: Effective Luminophores Novel Nanoscaled Materials from Lignocellulosic Sources: Potential Applications in the Agricultural Sector
Green Nanotechnology for Biomedical, Food, and Agricultural Applications
Agro-Industrial Waste Materials and their Recycled Value-Added Applications: Review
Polysaccharides as Eco-Nanomaterials for Agricultural Applications
Compostable Polymeric Ecomaterials: Environment-Friendly Waste Management Alternative to Landfills
Geopolymers: Past, Present, and Future of Low Carbon Footprint Eco-Materials
Carbon Nanotube-Based Biodegradable Polymeric Nanocomposites: 3Rs (Reduce, Reuse, and Recycle) in the Design
Polyhydroxybutyrate (PHB): A Standout Biopolymer for Environmental Sustainability Eco-polymer and Carbon Nanotube Composite: Safe Technology
Polyhydroxyalkanoates (PHAs) in Industrial Applications
Polyhydroxyalkanoates: Biodegradable Plastics and Their Applications
Biobased Polyamide Ecomaterials and Their Susceptibility to Biodegradation
Alternative and Renewable Bio-based and Biodegradable Plastics
Biobased and Biodegradable Plastics
Waste Polymethyl Methacrylate (PMMA): Recycling and High-Yield Monomer Recovery
Polymers for Energy Applications
Eco-Materials with Noise Reduction Properties
Halogen-Free Flame Retardant Plastics
Environmentally Friendly Fluids for High-Voltage Applications
An Overview of Advancement in the Application of Heat-Resistant Alloys
Eco-Material Selection for Auto Bodies
Regeneration and Recycling of Spent Bleaching Earth
Biomimetic Materials for Addressing Climate Change
Multifunctional Composite Ecomaterials and Their Impact on Sustainability
Advanced Materials from Forests
Eco-Friendly Nanoparticle Additives for Lubricants and Their Tribological Characterization
Eco-friendly Lubricants for Tribological Application
Highly Efficient Hybrid Protective Materials for Technically Complicated Systems in Natural Aggressive Conditions Eco-Adsorbents for Organic Solvents and Grease Removal
Microporous and Mesoporous Materials from Natural and Inexpensive Sources
Low-Cost Materials with Adsorption Performance
Eco-Friendly Energetic Substances for Initiation Devices
Nanoclays for Biomedical Applications
Biomedical Applications of Chitosan
Biomolecule Silver Nanoparticle-Based Materials for Biomedical Applications
Porosity in Biomaterials: A Key Factor in the Development of Applied Materials in Biomedicine
Nanobioremediation: Ecofriendly Application of Nanomaterials
Bioactive Cosmetics
DNA Nanotechnology
Protein Nanotechnology
RNA Nanotechnology
Nanomaterial for the Management of Radioactive Waste
New Sorbents for Processing Radioactive Waste
Application of Nanoparticle Materials in Radiation Therapy
Ecological Aspects of Nuclear Industry
Life Cycle of Ion Exchangers in Nuclear Industry: Application and Management of Spent Exchangers
 

Notă biografică

Professor Dr. Leticia Myriam Torres-Martínez is recognized as Certified Leader in Renewable Energy and Energy Efficiency Applied by Harvard University, USA. She has the following academic products: more than 181 indexed articles, 67 directed thesis, 1 authorized patent and 4 registered, 7 chapters book, 2 books, 383 international lectures, 9 proceeding books, 27 innovations and technological developments, 57 research projects, 2,056 citations to publications, leader of 5 research groups and 3 national scientific networks, 5 designed and implemented postgraduate programs. Two of these programs were designed and offered as UNI-Enterprise (Vitro and Cemex). She designed and implemented the Center for Research and Development of Ceramic Materials (CIDEMAC), which was self-financed during her leadership. From the year 2009, she led a technological development project with PEMEX, which allowed the pre-boot technology change in their processes. This project concluded successfully in December 2012.
Her research lines of interest are: a) Development of advanced materials (powders and thin films) for renewable energy systems and sustainable environmental decontamination. b) Synthesis, characterization  and performance of multifunctional materials on photoinduced processes. c) Preparation of semiconductor materials for environmental photo(electro)catalysis: H2 production, CO2 photoconv ersion and water purification. d)  Synthesis of new ceramic oxides based on phase equilibrium diagrams.
She has more than 62 national and international awards and recognitions, which we highlight: 1) Twenty one Awards for UANL Best Research Work in Exact Sciences and Engineering and Technology areas. The most recent in 2018, awarded in Exact Sciences. 2) Recognition "Flame, Life and Woman" by remarkable career and outstanding work in the field of Education and Research, as part of International Women's Day. UANL, in 2012. 3) Appointment as Member of the Board and Representative of researchers in the areas VI and VII of SNI in the Technological and Scientific Advisory Forum 2008 to 2011. 4) Nomination of CIDEMAC in the National Award of Technology by SECOFI, it was one of the 3 FINALISTS companies of technology research (out of 180), awarded in Los Pinos and headed by President Ernesto Zedillo Ponce de Leon in 2000; 5) In 2018 she won the National Award of Science in Mexico and received it from the hands of the Mexican President Enrique Peña Nieto.
Dr. Oxana Vasilievna Kharissova (born in 1969 in Ukraine, former USSR, has lived in Mexico from 1995, and naturalized in Mexico in 2004) is currently a Professor and Researcher at the UANL. Degrees: An MS in 1994, in crystallography from Moscow State University, Russia, and a Ph.D. in Materials from the Universidad Autónoma de Nuevo León, Mexico. Memberships: National Researchers System (Level II), Materials Research Society. She is the co-author of six books, 3 book chapters, 85 articles, and holds four patents. Specialties: Materials, nanotechnology (carbon nanotubes, nanometals, fullerenes), microwave irradiation and crystallography; nanotechnology-based methods for petroleum treatment.

Dr. Boris Ildusovich Kharisov (born in 1964, in Russia, has lived in Mexico from 1994, and naturalized in Mexico in 2003) is currently a Professor and Researcher at the Universidad Autónoma de Nuevo León (UANL). He took part in the liquidation of the consequences of the Chernobyl accident, working in the contaminated zone in 1987. Degrees: An MS in 1986, in radiochemistry and a PhD in inorganic chemistry in 1993, from the Moscow State University, Russia; Dr. Hab. in physical chemistry in 2006 from Rostov State University, Russia. Memberships: Mexican Academy of Science, National Researchers System (SNI, Level II), Materials Research Society. He is the co-author of ten books, 166 articles, 10 book chapters, and holds four patents. Co-editor: Three invited special issues of international journals. He is the member of the Editorial board of three journals. Specialties: Materials chemistry, coordination and inorganic chemistry, phthalocyanines, ultrasound, nanotechnology, chemical treatment of petroleum, environmental remediation. Dr. Kharisov has three children. His biography was published in: “Who is Who in the World”, “Outstanding People of the Twentieth Century”, and so on.

Caracteristici

An expansive, multidisciplinary approach on the use of eco-materials
Discusses eco-materials energy renewal applications
Authoritative treatment of high-interest topics, concisely written and replete with illustrations
Includes supplementary material: sn.pub/extras