Cantitate/Preț
Produs
Total produse
Vezi coșul
Light Metals 2017 de Arne P. Ratvik

Light Metals 2017: The Minerals, Metals & Materials Series

Editat de Arne P. Ratvik
en Limba Engleză Hardback – 13 mar 2017
The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2017 collection includes papers from the following symposia:
Alumina and Bauxite
Aluminum Alloys, Processing, and Characterization
Aluminum Reduction Technology
Cast Shop Technology
Cast Shop Technology: Recycling and Sustainability Joint Session
Electrode Technology
The Science of Melt Refining: An LMD Symposium in Honor of Christian Simensen and Thorvald Abel Engh
Citește tot Restrânge

Din seria The Minerals, Metals & Materials Series

Preț: 351754 lei

Preț vechi: 428968 lei
-18% Nou

Puncte Express: 5276
Preț estimativ în valută:
67321€ • 71021$ • 56102£

Carte disponibilă

Livrare economică 12-26 decembrie

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319515403
ISBN-10: 3319515403
Pagini: 1492
Ilustrații: XXIX, 1492 p. 1429 illus.
Dimensiuni: 210 x 279 x 56 mm
Greutate: 3.24 kg
Ediția:2017
Editura: Springer International Publishing
Colecția Springer
Seria The Minerals, Metals & Materials Series

Locul publicării:Cham, Switzerland

Cuprins

Part 1: Alumina & Bauxite: Digestion and Calcination.- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries.- Evolutional Development of Alkaline Aluminosilicates Processing Technology.- Characterization and Ore Dressing of Bauxite from Brazil.- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology.- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker.- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution.- Part 2: Alumina & Bauxite: Bauxite Residues Technology.- Security Disposal and Comprehensive Utilization of Bauxite Residues.- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation.- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process.- Low Temperature Reduction of Hematite in Red-Mud to Magnetite.- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching.- Processing diasporic red mud by the calcification-carbonation method.- Research of Flocculants and Dewatering Additives for Filtration of Red Mud.- Characterization of activated alumina production via spray pyrolysis.- Part 3: Alumina & Bauxite: Non-traditional Resources.- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination.- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method.- Chemical Alumina Preparation by Using High Alumina Content Fly Ash.- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur.- Iron separation from bauxite through smelting-reduction process.- Thermodynamic behavior of lime desulfurization in sodium aluminate solution.- Part 4: Alumina & Bauxite: Poster Session.- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology.- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications.- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database.- Study of an Al-Ca Alloy with Low Young's Modulus.- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting.- Aluminum alloys with tailored TiB2 particles for composite applications.- Development of low expansion and high strength aluminium hybrid composite.- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting.- A model for a-Al(Mn,Fe)Si crystals.- Casting Characteristics of High Cerium Content Aluminum Alloys.- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water.- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement.- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application.- Integrated casting-extrusion of an AA6082 aluminum alloy.- On Porosity Formation in Al-Si-Cu Cast Alloys.- Part 7: Aluminum Alloys, Processing and Characterization: Characterization.- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters.- Analysis of an aluminium alloy containing trace elements.- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy.- Test Uncertainty in Chemical Composition Analysis.- Real Time 3D Imaging and Laser Marking System for Industrial Traceability.- Production and Certification of Arconic Certified Reference Materials.- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050.- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy.- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy.- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment.- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075.- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis.- Young’s modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes.- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod.- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions.- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy.- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys.- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior.- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals.- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing.- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals.- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys.- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils.- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing.- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process.- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy.- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session.- Corrosion of Al-Mg Alloys in Ethanol.- Warm pressing of Al powders: an alternative consolidation approach.- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution.- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite.- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution.- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications.- Pot Gas Treatment at High Gas Temperatures.- Influence of Handling Parameter on Powder Properties.- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions.- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring.- Reduction in EGA Jebel Ali Potroom GHG Emissions.- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell.- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes.- Part 13: Aluminum Reduction Technology: Cell Lining Materials.- Chemical stability of thermal insulating materials in sodium vapour environment.- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS.- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell.- SPL Recycling and Re-Processing.- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling.- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control.- Clustering Aluminium Reduction Cells.- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells.- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator.- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control.- Predicting Instability and Current Efficiency of Industrial Cells.- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals.- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework.- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal.- Stability of Chlorides in Cryolitic Electrolyte.- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells.- Part 15: Aluminum Reduction Technology: Modelling and Cell Design.- Improving The Understanding Of BUSBAR Design And Cell MHD Performance.- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell.- MHD of Large Scale Liquid Metal Batteries.- Low energy consumption cell designs involving copper inserts and an innovative busbar network layout.- Minimizing Cathode Voltage Drop by Optimizing Cathode Slot Design.- Part 16: Aluminum Reduction Technology: Potroom Operations.- Crane Electrical Isulation Monitoring in Potlines: New CANDI 4.0 Development.- Surviving an Extended Power Outage after a Break Down in the Sub Station.- Retrofit of Damaged Corner Risers by Means of Bolted Connections.- Theory and Practice of High Temperature Gas Baking Technology for Alumninium Electrolysis Cells.- Part 17: Aluminum Reduction Technology: Technology Development.- IMPLEMENTATION OF D18+ CELL TECHNOLOGY AT EGA JEBEL ALI SMELTER.- Integrating a New Smelter Supervision HMI in Existing Control Systems at ALBRAS.- DX+ ULTRA – EGA HIGH PRODUCTIVITY, LOW ENERGY CELL TECHNOLOGY.- Potroom HF Emission Reduction by Anode Inert Tray Technology Performances of ALRO Industrial 1st of Class.- Enabling efficient heat recovery from aluminium pot gas.- The Successful Implementation of AP40 Technology at Kitimat.- Part 18: Cast Shop Technology: Continuous Strip Casting.- Effect of grain refiners on aluminum twin roll casting process.- Influence of Process Conditions on Segregation Behavior in Twin-Roll Casting of an AlFeSi alloy.- Effect of Magnesium Content on Microstructure and Mechanical Properties of Twin-Roll Cast Aluminum Alloys.- Influence of sticking on the roll topography at twin-roll casting of aluminum alloys.- Material Surface Roughness Change in Twin Roll Casting of Aluminium as Cast Sheet Product.- Twin-roll casting of aluminum-steel clad strips: static and dynamic mechanicalproperties of the composite.- Part 19: Cast Shop Technology: Foundry and Shape Casting.- Multi-Component High Pressure Die Casting (M-HPDC): Influencing factors on the material temperature during the joining of metal-plastic-hybrids.- X-RAY COMPUTED TOMOGRAPHIC INVESTIGATION OF HIGH PRESSURE DIE CASTINGS.- The comparison of Intensive riser cooling of castings after solidification in three classic metals.- Sequential Gravity Casting in Functionally Graded Aluminum Alloys Development.- Assessment of Eutectic Modification Level in Al-Si Alloys via Thermal Analysis.- Part 20: Cast Shop Technology: Melting, Energy, and Dross.- Application and Results of Oxipyr Diluted Combustion in Aluminum Furnaces.- Case Study of Magnetically-Stirred Casting Furnaces at New Zealand Aluminium Smelters Limited.- Energy efficiency status-quo of UK foundries: the “small-is-beautiful” project.- Optimization of Recovery Efficiency for Briquetted Aluminum Chips up to Briquetting Parameters.- The Evaluation of Hot Dross Processing Systems.- Part 21: Cast Shop Technology: DC Casting and Macrosegregation.- A Study on DC Casting Trough/ Launder Design and Material Selection.- Critical Role of Thermal Management during Cast Start-up of DC Casting Process.- Modelling and analysis of a Horizontal Direct Chill casting process.- Circulation of Grains during Ingot Casting.- Minimization of Macrosegregation through Jet Erosion of a Continuously Cast Ingot.- Full size measurement and simple prediction on macro segregation of aluminum alloys elements in industrial DC casting slab.- Ultrasonic assisted reduction of hot-tearing during high-speed DC casting of 6000 series aluminum alloys.- Part 22: Cast Shop Technology: Grain Refining and Solidification.- Effect of ultrasonic processing on a direct chill cast AA6082 aluminium alloy.- Shear Induced Grain Refinement of a Continuously Cast Ingot.- Microstructure Control in A356 Al-Si Alloy via Ultrasonic Melt Treatment.- Grain Refiner Settlement In The LaunderSystem Of Twin Roll Casting And Application Of Electromagnetic Stirring.- Thermal analysis of grain refining in A319 Alloys.- Peritectic Coupled Growth Solidification - A Review.- Part 23: Cast Shop Technology: Casthouse Management and Automation.- Overpressure Due To a Molten Aluminum and Water Explosion in a Casthouse.- Automation And Optimization Of Sow Casting In Alouette.- Radio Frequency Identification (RFID) Technology for the Aluminum Industry.- Semi finished Products Traceability Improvement With Laser Marking.- Structural Integrity Assessment of Pressurized Ladles for Aluminum Smelting.- Have Recent Advances in Direct Chill Casting Made Us Less Safe?.- Part 24: Cast Shop Technology: Recycling and Sustainability Joint Session.- Tramp Element Accumulation and its Effects on Secondary Phase Particles.- Dross formation mechanisms of thermally pre-treated used beverage can scrap bales with different density.- Influence of coating and de-coating on the coalescence of aluminium drops in salt.- The scale-up of high shear processing for the purification of recycled molten scrap aluminium alloy: key features of fluid flow.- Centrifugal Casting of Al-Si Scrap.- Improved recyclability of cast Al-alloys by engineering ß-Al9Fe2Si2 phase.- Part 25: Electrode Technology: Electrodes: Raw Materials and Anode Quality.- Influence of Calcination Temperature and Sulfur Level on Coke Properties.- Pilot Anode Properties of Binder Pitches Softening between 110 and 150°C.- Uniform Bulk Density for Calcined Petroleum Coke.- Use of Thermally Desulfurized Shaft CPC for Anode Production.- Anode carbon aggregate packing description compared to relevant industrial and engineering practices.- CPC Testing and Relationship between Coke and Anode Physical Properties.- Effect of coke properties on the bubble formation at the anodes during aluminium electrolysis in laboratory scale.- ANODE QUALITY IMPROVEMENT AT INALUM SMELTER.- Coke Produced from Lower-Oxygen Fast-Pyrolysis Oil, a New Approach to Produce Renewable Anode Raw Materials.- Part 26: Electrode Technology: Electrodes: Baking/Characterization.- 25 Years of Natural Gas Purged Infrared Pyrometer Temperature Measurement For The Operation Of Open-Top Anodes Baking Furnaces.- Characterization of Prebake Anodes by Micro X-ray Computed Tomography.- Development of techniques and tools for the determination of carbon anode quality.- Flow Detection Module – A New Model to Predict the Flow in Open Pit Anode Baking Furnaces.- Formation Of Carbon Build-Up On The Flue Wall Of Anode Baking Furnace.- Identification Of The Stress Intensity Factor Of Carbon Cathode By Digital Image Correlation.- Investigation of spent refractory lining in an anode baking furnace.- Non-destructive testing of baked anodes based on modal analysis and principal component analysis.- 3D Automated Anode Stub Inspection System.- Impact of Cast Iron Degradation and Cathode Block Erosion on the Current Path in the Cathodic Assembly of Aluminum Production Cells.- Part 27: Electrode Technology: Electrode Design and Performance.- Finite Element Analysis of Slot Size Effect on the Thermal-Electrical Behaviour of the Anode.- Hydrodynamic and thermoelectric 3D mathematical model of aluminium electrolysis cell to investigate slotted carbon anode efficiency.- Gas Anodes Made of Porous Graphite for Aluminium Electrowinning.- The Impact of Anode Nails on the Stub to Carbon Electrical Contact Resistance of Anode Assemblies with Simulated Corroded Stubs.- Xelios 2.0: Return On Experience for the Advanced Eco-designed Vibrocompactor.- Production of NiFe2O4 nanocermet for aluminium inert anode.- Reducing Cathode Voltage Drop and Reducing Peak Current Density by Use of Cathode Nails across the Carbon to Cast Iron Interface.- Hexapod Fleet Migration in Order to Upgrade to AP40LE Technology.- The Impact of Increased Anode Size and Amperage Creep on Anode Management.- Part 28: The Science of Melt Refining: An LMD Symposium in Honor of Christian Simensen and Thorvald Engh: TAE/CJS Honorary Symposium I: Inclusion Removal.- The Contributions of Thorvald Engh and Christian Simensen to the Science of Melt Refining.- The Fundamentals of Forming Microbubbles in Liquid Metal Systems.- A Holistic Approach to Molten Metal Cleanliness.- Results of Trials with a Multi Stage Filtration System Employing a Cyclone.- Developments in Inclusion Removal Technology Developments in Inclusion Removal Technology.- Part 29: The Science of Melt Refining: An LMD Symposium in Honor of Christian Simensen and Thorvald Engh: TAE/CJS II Degassing and Oxidation.- Overview of ultrasonic degassing development.- Modelling of hydrogen removal in gas fluxing of molten aluminium.- Oxide skin strength on molten AA5XXX aluminum alloy – effect of beryllium and alternatives.- Understanding of interactions between pyrolysis gases and liquid aluminum and their impact on dross formation.- Effects of 2 ppm beryllium on the oxidation of a 5XXX aluminum alloy at temperatures between500 °C and 750 °C.- The Use of Nitrogen to Degas Molten Aluminium – Comparison of Metallurgical Results with Argon and Nitrogen Used in an ACD\\8482.

Recenzii

     

Notă biografică

About TMS
The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.








Caracteristici

Definitive reference in the field of aluminum production and related light metal technologies Annual volume that has presented the most recent developments, discoveries, and practices in primary aluminum science and technology for more than 40 years Covers leading-edge developments on alumina and bauxite, aluminum alloys, processing, characterization, reduction, cast shop and electrode technology, and melt refining Includes supplementary material: sn.pub/extras