Cantitate/Preț
Produs
Total produse
Vezi coșul
Mechanics of Additive and Advanced Manufacturing, Volume 9: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics de Junlan Wang

Mechanics of Additive and Advanced Manufacturing, Volume 9: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics: Conference Proceedings of the Society for Experimental Mechanics Series

Editat de Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre
en Limba Engleză Paperback – 18 aug 2018
Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: 
  • Design,
  • Optimization
  • Experiments
  • Computations
  • Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.)
  • Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)
Citește tot Restrânge

Din seria Conference Proceedings of the Society for Experimental Mechanics Series

Preț: 77551 lei

Preț vechi: 102041 lei
-24% Nou

Puncte Express: 1163
Preț estimativ în valută:
14842€ • 15656$ • 12404£

Carte tipărită la comandă

Livrare economică 28 decembrie 24 - 03 ianuarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319874081
ISBN-10: 331987408X
Pagini: 107
Ilustrații: VIII, 107 p. 80 illus., 50 illus. in color.
Dimensiuni: 210 x 279 mm
Ediția:Softcover reprint of the original 1st ed. 2018
Editura: Springer International Publishing
Colecția Springer
Seria Conference Proceedings of the Society for Experimental Mechanics Series

Locul publicării:Cham, Switzerland

Cuprins

​Chapter 1.Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials.- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction.- Chapter 3.Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material.- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool.- Chapter 5.Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing.- Chapter 6.Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing.- Chapter 7.Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes.- Chapter 8.Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys.- Chapter 9.Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties.- Chapter 10.ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components.- Chapter 11.Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding.- Chapter 12.Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing.- Chapter 13.Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing.- Chapter 14.The Effect of the 3-D Printing Process on the Mechanical Properties of Materials.- Chapter 15.Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication.

Textul de pe ultima copertă

Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: 
  • Design,
  • Optimization
  • Experiments
  • Computations
  • Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.)
  • Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)

Caracteristici

Includes supplementary material: sn.pub/extras