Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications: Woodhead Publishing Series in Metals and Surface Engineering
Editat de S H Whangen Limba Engleză Paperback – 18 aug 2016
Din seria Woodhead Publishing Series in Metals and Surface Engineering
- 25%
Preț: 889.94 lei - 9%
Preț: 1018.56 lei - 24%
Preț: 1034.24 lei - 24%
Preț: 1327.37 lei - 24%
Preț: 1216.31 lei - 9%
Preț: 1126.27 lei - 24%
Preț: 1154.97 lei - 9%
Preț: 804.58 lei - 9%
Preț: 951.53 lei - 9%
Preț: 1383.31 lei - 9%
Preț: 802.62 lei - 29%
Preț: 1321.72 lei - 24%
Preț: 1119.69 lei - 24%
Preț: 856.75 lei - 27%
Preț: 1893.27 lei - 25%
Preț: 1547.16 lei - 9%
Preț: 1073.50 lei - 27%
Preț: 1897.79 lei - 27%
Preț: 1297.96 lei - 24%
Preț: 924.55 lei - 24%
Preț: 1120.61 lei
Preț: 1129.34 lei
Preț vechi: 1241.03 lei
-9% Nou
Puncte Express: 1694
Preț estimativ în valută:
216.27€ • 234.05$ • 180.29£
216.27€ • 234.05$ • 180.29£
Carte tipărită la comandă
Livrare economică 02-16 decembrie
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9780081017388
ISBN-10: 0081017383
Pagini: 840
Dimensiuni: 156 x 234 x 42 mm
Greutate: 1.15 kg
Editura: ELSEVIER SCIENCE
Seria Woodhead Publishing Series in Metals and Surface Engineering
ISBN-10: 0081017383
Pagini: 840
Dimensiuni: 156 x 234 x 42 mm
Greutate: 1.15 kg
Editura: ELSEVIER SCIENCE
Seria Woodhead Publishing Series in Metals and Surface Engineering
Cuprins
Contributor contact details
Introduction
Part I: Processing bulk nanostructured metals and alloys
Chapter 1: Producing bulk nanostructured metals and alloys by severe plastic deformation (SPD)
Abstract:
1.1 Introduction
1.2 The principles of severe plastic deformation (SPD) processing
1.3 New trends in SPD processing for effective grain refinement
1.4 Enhanced properties achieved using SPD processing
1.5 Innovation potential of bulk nanostructured materials
1.6 Conclusions
Chapter 2: Bulk nanostructured metals and alloys produced by accumulative roll-bonding
Abstract:
2.1 Introduction
2.2 The principle of accumulative roll-bonding (ARB)
2.3 Processing details
2.4 Change in microstructures during the process
2.5 Mechanical properties of nanostructured metals fabricated by ARB
2.6 Conclusions
Chapter 3: Nanocrystalline metals and alloys prepared by mechanical attrition
Abstract:
3.1 Introduction
3.2 Mechanical attrition
3.3 Nanocrystalline phase formation by mechanical attrition
3.4 Consolidation of nanocrystalline powders
3.5 Conclusion and future trends
3.6 Acknowledgements
Chapter 4: The processing of nanocrystalline steels by solid reaction
Abstract:
4.1 Introduction
4.2 The finest grain structures in steels
4.3 Phase transformation theory: a powerful tool for the design of advanced steels, from micro to nano
4.4 NANOBAIN steel: a material going to extremes
4.5 Accelerating the bainite reaction at low temperatures
4.6 Characterizing nanocrystalline bainitic steels at the atomic scale
4.7 The mechanical properties of nanocrystalline bainitic steels
4.8 Conclusion and future trends
4.10 Acknowledgements
Chapter 5: The processing of bulk nanocrystalline metals and alloys by electrodeposition
Abstract:
5.1 Introduction
5.2 Electrodeposition methods
5.3 Examples of nanocrystalline metals and alloys prepared by electrodeposition
5.4 Mechanical properties of nanocrystalline electrodeposits
5.5 Corrosion properties of nanocrystalline electrodeposits
5.6 Other properties of nanocrystalline electrodeposits
5.7 Applications
5.8 Acknowledgements
Chapter 6: Bulk nanocrystalline and nanocomposite alloys produced from amorphous phase
Abstract:
6.1 Introduction
6.2 The formation of bulk metallic glassy alloys
6.3 The formation of a nanostructure by crystallization of the glassy phase, by deformation or directly from the melt on casting
6.4 The formation of nano-quasicrystals
6.5 The mechanical properties of nanocomposite alloys
6.6 The magnetic properties of nanocomposite alloys
6.7 Conclusions
Chapter 7: Severe plastic deformation and the production of nanostructured alloys by machining
Abstract:
7.1 Introduction
7.2 The mechanics of severe plastic deformation (SPD) in machining
7.3 A study of microstructure refinement
7.4 Bulk forms with ultrafine-grained (UFG) microstructure
7.5 Nanostructured particulate
7.6 Surface nanostructuring
7.7 Conclusions
7.8 Acknowledgements
Part II: Microstructure
Chapter 8: Deformation structures including twins in nanograined pure metals
Abstract:
8.1 Introduction
8.2 Classical defect structures in nanograined metals
8.3 Classical defect structures absent in nanograined metals
8.4 Novel defect structures in nanograined metals
8.5 The effect of initial microstructure on deformation structures
8.6 Future trends
8.7 Acknowledgements
Chapter 9: Microstructure and mechanical properties of nanostructured low-carbon steel prepared by equal-channel angular pressing
Abstract:
9.1 Introduction
9.2 The microstructural evolution of low-carbon steel (LCS)
9.3 The mechanical response of a nanostructured LCS alloy
9.4 Enhanced tensile properties by grain refinement and microstructural modification
9.5 Continuous shear drawing: a new processing method
9.6 Conclusion
Chapter 10: Characteristic structures and properties of nanostructured metals prepared by plastic deformation
Abstract:
10.1 Introduction
10.2 Characteristic microstructures
10.3 Hardening by annealing and softening by deformation
10.4 Optimisation of microstructure and mechanical properties
10.5 Conclusions
10.6 Acknowledgements
Part III: Mechanical properties
Chapter 11: Strengthening mechanisms in nanocrystalline metals
Abstract:
11.1 Introduction
11.2 The deformation of polycrystals; the Hall–Petch model for strengthening; typical strength and hardness data
11.3 Hall–Petch breakdown; a fine grain size limit to models
11.4 Hall–Petch breakdown: the importance of defective materials
11.5 Alternative deformation mechanisms at very fine grain sizes
11.6 Strengthening caused by second-phase particles
11.7 Strengthening caused by other factors: solute, order, twin boundaries
11.8 Strengthening mechanisms in materials with ultrafine microstructure prepared by severe plastic deformation
11.9 Conclusion and future trends
Chapter 12: Elastic and plastic deformation in nanocrystalline metals
Abstract:
12.1 Introduction
12.2 Elastic strains in nanocrystalline metals
12.3 Plastic deformation in nanocrystalline metals
12.4 Conclusions and future trends
12.5 Sources of further information and advice
12.6 Acknowledgements
Chapter 13: The mechanical properties of multi-scale metallic materials
Abstract:
13.1 Introduction
13.2 Mechanical properties of multi-scale metallic materials
13.3 Deformation and fracture mechanisms of multi-scale metallic materials
13.4 Future trends
13.5 Conclusions
13.6 Acknowledgements
Chapter 14: Enhanced ductility and its mechanisms in nanocrystalline metallic materials
Abstract:
14.1 Introduction
14.2 General aspects concerning the tensile ductility of materials
14.3 Plastic flow mechanisms in coarse-grained metallic polycrystals, ultrafine-grained metals and nanocrystalline metals with intermediate grains
14.4 Plastic flow mechanisms in nanocrystalline metals with the finest grains
14.5 Specific features of crack nucleation and growth processes in nanocrystalline metallic materials
14.6 Enhanced ductility of artifact-free nanocrystalline metals with narrow grain size distributions
14.7 Enhanced ductility of nanocrystalline metals due to twin deformation and growth twins
14.8 Enhanced ductility of nanocrystalline metals due to strain rate hardening
14.9 Enhanced ductility of single-phase nanocrystalline metals with bimodal structures
14.10 Enhanced ductility of nanocrystalline metallic composites with second-phase nanoparticles, dendrite-like inclusions and carbon nanotubes
14.11 Conclusions and future trends
14.12 Sources of further information and advice
14.13 Acknowledgements
Chapter 15: The mechanical behavior of nanostructured metals based on molecular dynamics computer simulations
Abstract:
15.1 Introduction
15.2 The structure and properties of grain boundaries in nanocrystalline (NC) metals by molecular dynamics (MD) simulation
15.3 Deformation mechanisms in nanoscale grains
15.4 Grain growth and microstructure evolution in NC metals
15.5 Conclusions
15.6 Acknowledgement
Chapter 16: The surface deformation and mechanical behavior of nanostructured alloys
Abstract:
16.1 Introduction
16.2 Mechanics aspects during surface severe plastic deformation
16.3 Changes in the microstructure and stress states induced by surface severe plastic deformation
16.4 Tensile properties of metals with a nanocrystalline surface and hardened layer
16.5 Fatigue resistance of metals with a nanocrystalline surface and hardened layer
16.6 Wear resistance of metals with a nanocrystalline surface and hardened layer
16.7 Conclusions
16.8 Acknowledgements
Chapter 17: Fatigue behaviour in nanostructured metals
Abstract:
17.1 Introduction and motivation
17.2 General findings on the fatigue behaviour and the fatigue lives of nanostructured model materials
17.3 Light metal alloys
17.4 Fatigue behaviour and life of nanostructured steels
17.5 Consequences and strategies for optimizing fatigue lives and cyclic deformation behaviour
Chapter 18: Superplastic deformation in nanocrystalline metals and alloys
Abstract:
18.1 Introduction
18.2 Theoretical predictions
18.3 Superplasticity in nanocrystalline metals and alloys
18.4 Specific features of superplasticity in nanocrystalline materials
18.5 Deformation mechanisms
18.6 Conclusions
18.7 Acknowledgments
Chapter 19: Creep and high-temperature deformation in nanostructured metals and alloys
Abstract:
19.1 Introduction
19.2 Temperature-dependent deformation in fine-grained pure metals
19.3 Creep and high-temperature deformation in nanostructured alloys
19.4 Deformation mechanisms and modeling
19.5 Conclusions
Part IV: Applications
Chapter 20: Processing nanostructured metal and metal-matrix coatings by thermal and cold spraying
Abstract:
20.1 Introduction
20.2 Nanostructured metal-base feedstock
20.3 Thermal spray processing
20.4 Thermal spray processing of nanostructured coatings: tungsten carbide-cobalt (WC-Co) coatings
20.5 Thermal spray processing of nanostructured coatings: alumina-titania (n-AT) coatings
20.6 Thermal spray processing of nanostructured coatings: titanium oxide coatings
20.7 Thermal spray processing of nanostructured coatings: MCrAlY and NiCrAlY coatings
20.8 The cold spray process
20.9 Characteristics of cold spray material
20.10 Cold-sprayed processing of WC-Co
20.11 Cold-sprayed processing of non-cryogenically milled n-WERKZ AA5083
20.12 Future trends
20.13 Sources of further information and advice
20.14 Acknowledgements
Chapter 21: Nanocoatings for commercial and industrial applications
Abstract:
21.1 Introduction
21.2 Overview of nanostructured metals and alloys
21.3 Commercialization of nanostructured materials
21.4 Current and emerging applications
21.5 Conclusions
Chapter 22: Applying nanostructured steel sheets to automotive body structures
Chapter 23: Production processes for nanostructured wires, bars and strips
Chapter 24: Nanostructured plain carbon-manganese (C-Mn) steel sheets prepared by ultra-fast cooling and short interval multi-pass hot rolling
Abstract:
24.1 Introduction
24.2 The concept of ultra-fast direct cooling and short interval multi-pass hot rolling (UDCSMR) and an experimental hot rolling mill
24.3 Nanostructured carbon-manganese (C-Mn) steel sheets produced by UDCSMR
24.4 Grain refinement mechanisms
24.5 Deformation characteristics
24.6 Welding and application to some prototype parts
24.7 Conclusions
Index
Introduction
Part I: Processing bulk nanostructured metals and alloys
Chapter 1: Producing bulk nanostructured metals and alloys by severe plastic deformation (SPD)
Abstract:
1.1 Introduction
1.2 The principles of severe plastic deformation (SPD) processing
1.3 New trends in SPD processing for effective grain refinement
1.4 Enhanced properties achieved using SPD processing
1.5 Innovation potential of bulk nanostructured materials
1.6 Conclusions
Chapter 2: Bulk nanostructured metals and alloys produced by accumulative roll-bonding
Abstract:
2.1 Introduction
2.2 The principle of accumulative roll-bonding (ARB)
2.3 Processing details
2.4 Change in microstructures during the process
2.5 Mechanical properties of nanostructured metals fabricated by ARB
2.6 Conclusions
Chapter 3: Nanocrystalline metals and alloys prepared by mechanical attrition
Abstract:
3.1 Introduction
3.2 Mechanical attrition
3.3 Nanocrystalline phase formation by mechanical attrition
3.4 Consolidation of nanocrystalline powders
3.5 Conclusion and future trends
3.6 Acknowledgements
Chapter 4: The processing of nanocrystalline steels by solid reaction
Abstract:
4.1 Introduction
4.2 The finest grain structures in steels
4.3 Phase transformation theory: a powerful tool for the design of advanced steels, from micro to nano
4.4 NANOBAIN steel: a material going to extremes
4.5 Accelerating the bainite reaction at low temperatures
4.6 Characterizing nanocrystalline bainitic steels at the atomic scale
4.7 The mechanical properties of nanocrystalline bainitic steels
4.8 Conclusion and future trends
4.10 Acknowledgements
Chapter 5: The processing of bulk nanocrystalline metals and alloys by electrodeposition
Abstract:
5.1 Introduction
5.2 Electrodeposition methods
5.3 Examples of nanocrystalline metals and alloys prepared by electrodeposition
5.4 Mechanical properties of nanocrystalline electrodeposits
5.5 Corrosion properties of nanocrystalline electrodeposits
5.6 Other properties of nanocrystalline electrodeposits
5.7 Applications
5.8 Acknowledgements
Chapter 6: Bulk nanocrystalline and nanocomposite alloys produced from amorphous phase
Abstract:
6.1 Introduction
6.2 The formation of bulk metallic glassy alloys
6.3 The formation of a nanostructure by crystallization of the glassy phase, by deformation or directly from the melt on casting
6.4 The formation of nano-quasicrystals
6.5 The mechanical properties of nanocomposite alloys
6.6 The magnetic properties of nanocomposite alloys
6.7 Conclusions
Chapter 7: Severe plastic deformation and the production of nanostructured alloys by machining
Abstract:
7.1 Introduction
7.2 The mechanics of severe plastic deformation (SPD) in machining
7.3 A study of microstructure refinement
7.4 Bulk forms with ultrafine-grained (UFG) microstructure
7.5 Nanostructured particulate
7.6 Surface nanostructuring
7.7 Conclusions
7.8 Acknowledgements
Part II: Microstructure
Chapter 8: Deformation structures including twins in nanograined pure metals
Abstract:
8.1 Introduction
8.2 Classical defect structures in nanograined metals
8.3 Classical defect structures absent in nanograined metals
8.4 Novel defect structures in nanograined metals
8.5 The effect of initial microstructure on deformation structures
8.6 Future trends
8.7 Acknowledgements
Chapter 9: Microstructure and mechanical properties of nanostructured low-carbon steel prepared by equal-channel angular pressing
Abstract:
9.1 Introduction
9.2 The microstructural evolution of low-carbon steel (LCS)
9.3 The mechanical response of a nanostructured LCS alloy
9.4 Enhanced tensile properties by grain refinement and microstructural modification
9.5 Continuous shear drawing: a new processing method
9.6 Conclusion
Chapter 10: Characteristic structures and properties of nanostructured metals prepared by plastic deformation
Abstract:
10.1 Introduction
10.2 Characteristic microstructures
10.3 Hardening by annealing and softening by deformation
10.4 Optimisation of microstructure and mechanical properties
10.5 Conclusions
10.6 Acknowledgements
Part III: Mechanical properties
Chapter 11: Strengthening mechanisms in nanocrystalline metals
Abstract:
11.1 Introduction
11.2 The deformation of polycrystals; the Hall–Petch model for strengthening; typical strength and hardness data
11.3 Hall–Petch breakdown; a fine grain size limit to models
11.4 Hall–Petch breakdown: the importance of defective materials
11.5 Alternative deformation mechanisms at very fine grain sizes
11.6 Strengthening caused by second-phase particles
11.7 Strengthening caused by other factors: solute, order, twin boundaries
11.8 Strengthening mechanisms in materials with ultrafine microstructure prepared by severe plastic deformation
11.9 Conclusion and future trends
Chapter 12: Elastic and plastic deformation in nanocrystalline metals
Abstract:
12.1 Introduction
12.2 Elastic strains in nanocrystalline metals
12.3 Plastic deformation in nanocrystalline metals
12.4 Conclusions and future trends
12.5 Sources of further information and advice
12.6 Acknowledgements
Chapter 13: The mechanical properties of multi-scale metallic materials
Abstract:
13.1 Introduction
13.2 Mechanical properties of multi-scale metallic materials
13.3 Deformation and fracture mechanisms of multi-scale metallic materials
13.4 Future trends
13.5 Conclusions
13.6 Acknowledgements
Chapter 14: Enhanced ductility and its mechanisms in nanocrystalline metallic materials
Abstract:
14.1 Introduction
14.2 General aspects concerning the tensile ductility of materials
14.3 Plastic flow mechanisms in coarse-grained metallic polycrystals, ultrafine-grained metals and nanocrystalline metals with intermediate grains
14.4 Plastic flow mechanisms in nanocrystalline metals with the finest grains
14.5 Specific features of crack nucleation and growth processes in nanocrystalline metallic materials
14.6 Enhanced ductility of artifact-free nanocrystalline metals with narrow grain size distributions
14.7 Enhanced ductility of nanocrystalline metals due to twin deformation and growth twins
14.8 Enhanced ductility of nanocrystalline metals due to strain rate hardening
14.9 Enhanced ductility of single-phase nanocrystalline metals with bimodal structures
14.10 Enhanced ductility of nanocrystalline metallic composites with second-phase nanoparticles, dendrite-like inclusions and carbon nanotubes
14.11 Conclusions and future trends
14.12 Sources of further information and advice
14.13 Acknowledgements
Chapter 15: The mechanical behavior of nanostructured metals based on molecular dynamics computer simulations
Abstract:
15.1 Introduction
15.2 The structure and properties of grain boundaries in nanocrystalline (NC) metals by molecular dynamics (MD) simulation
15.3 Deformation mechanisms in nanoscale grains
15.4 Grain growth and microstructure evolution in NC metals
15.5 Conclusions
15.6 Acknowledgement
Chapter 16: The surface deformation and mechanical behavior of nanostructured alloys
Abstract:
16.1 Introduction
16.2 Mechanics aspects during surface severe plastic deformation
16.3 Changes in the microstructure and stress states induced by surface severe plastic deformation
16.4 Tensile properties of metals with a nanocrystalline surface and hardened layer
16.5 Fatigue resistance of metals with a nanocrystalline surface and hardened layer
16.6 Wear resistance of metals with a nanocrystalline surface and hardened layer
16.7 Conclusions
16.8 Acknowledgements
Chapter 17: Fatigue behaviour in nanostructured metals
Abstract:
17.1 Introduction and motivation
17.2 General findings on the fatigue behaviour and the fatigue lives of nanostructured model materials
17.3 Light metal alloys
17.4 Fatigue behaviour and life of nanostructured steels
17.5 Consequences and strategies for optimizing fatigue lives and cyclic deformation behaviour
Chapter 18: Superplastic deformation in nanocrystalline metals and alloys
Abstract:
18.1 Introduction
18.2 Theoretical predictions
18.3 Superplasticity in nanocrystalline metals and alloys
18.4 Specific features of superplasticity in nanocrystalline materials
18.5 Deformation mechanisms
18.6 Conclusions
18.7 Acknowledgments
Chapter 19: Creep and high-temperature deformation in nanostructured metals and alloys
Abstract:
19.1 Introduction
19.2 Temperature-dependent deformation in fine-grained pure metals
19.3 Creep and high-temperature deformation in nanostructured alloys
19.4 Deformation mechanisms and modeling
19.5 Conclusions
Part IV: Applications
Chapter 20: Processing nanostructured metal and metal-matrix coatings by thermal and cold spraying
Abstract:
20.1 Introduction
20.2 Nanostructured metal-base feedstock
20.3 Thermal spray processing
20.4 Thermal spray processing of nanostructured coatings: tungsten carbide-cobalt (WC-Co) coatings
20.5 Thermal spray processing of nanostructured coatings: alumina-titania (n-AT) coatings
20.6 Thermal spray processing of nanostructured coatings: titanium oxide coatings
20.7 Thermal spray processing of nanostructured coatings: MCrAlY and NiCrAlY coatings
20.8 The cold spray process
20.9 Characteristics of cold spray material
20.10 Cold-sprayed processing of WC-Co
20.11 Cold-sprayed processing of non-cryogenically milled n-WERKZ AA5083
20.12 Future trends
20.13 Sources of further information and advice
20.14 Acknowledgements
Chapter 21: Nanocoatings for commercial and industrial applications
Abstract:
21.1 Introduction
21.2 Overview of nanostructured metals and alloys
21.3 Commercialization of nanostructured materials
21.4 Current and emerging applications
21.5 Conclusions
Chapter 22: Applying nanostructured steel sheets to automotive body structures
Chapter 23: Production processes for nanostructured wires, bars and strips
Chapter 24: Nanostructured plain carbon-manganese (C-Mn) steel sheets prepared by ultra-fast cooling and short interval multi-pass hot rolling
Abstract:
24.1 Introduction
24.2 The concept of ultra-fast direct cooling and short interval multi-pass hot rolling (UDCSMR) and an experimental hot rolling mill
24.3 Nanostructured carbon-manganese (C-Mn) steel sheets produced by UDCSMR
24.4 Grain refinement mechanisms
24.5 Deformation characteristics
24.6 Welding and application to some prototype parts
24.7 Conclusions
Index