RF Circuits for 5G Applications – Designing with mm Wave Circuitry

Sangeeta Singh, PhD, is an assistant professor in the Department of Electronics and Communication Engineering, NIT Patna, India. She has been recognized as an eminent scholar in the field of electronics and computer engineering. She has published many research papers in reputed international journals and conferences. She has edited "CMOS Analog IC Design for 5G and Beyond", Lecture Notes in Electrical Engineering (Springer), 2021. Rajeev Arya, PhD, received his doctorate in Communication Engineering from the Indian Institute of Technology (IIT Roorkee) in 2016. He is currently an assistant professor in the Department of Electronics & Communication Engineering at National Institute of Technology, Patna, India. He has published many articles in international journals, conferences and received best paper award at ICCET-2019. B. C. Sahana, PhD, is an assistant professor in the Department of Electronics and Communication Engineering, NIT Patna, India. He has supervised PhD, M.Tech and B.Tech students in the area of signal processing, optimization, soft computing and swarm intelligence techniques with applications to various engineering design problems, image processing and compression, computer vision, geophysical signal processing, filter design. He has published more than 20 research publications in journals and conferences. Ajay Kumar Vyas, PhD, has more than 16 years of teaching and research experience. He is currently a senior assistant professor at the Adani Institute of Infrastructure Engineering, Ahmedabad, India. He is the author of several research papers in peer-reviewed international journals and conferences, books on digital electronics. He has also edited five books.

Preface xv Part I: 5G Communication 1 1 Needs and Challenges of the 5 th Generation Communication Network 3 Anamika Raj, Gaurav Kumar and Sangeeta Singh 1.1 Introduction 3 1.1.1 What is 5G and Do We Need 5G? 5 1.1.2 A Brief History of Gs 6 1.2 mmWave Spectrum, Challenges, and Opportunities 8 1.3 Framework Level Requirements for mmWave Wireless Links 11 1.4 Circuit Aspects 12 1.5 Outline of the Book 14 Acknowledgement 15 References 15 2 5G Circuits from Requirements to System Models and Analysis 19 Vipin Sharma, Rachit Patel and Krishna Pandey 2.1 RF Requirements Governed by 5G System Targets 19 2.2 Radio Spectrum and Standardization 20 2.3 System Scalability 21 2.4 Communication System Model for RF System Analysis 22 2.5 System-Level RF Performance Model 23 2.5.1 Transmitter, Receiver, Antenna Array and Transceiver Architectures for RF and Hybrid Beamforming 24 2.6 Radio Propagation and Link Budget 24 2.6.1 Radio Propagation Model 24 2.6.2 Link Budgeting 25 2.7 Multiuser Multibeam Analysis 26 2.8 Conclusion 28 Acknowledgement 29 References 29 3 Millimetre-Wave Beam-Space MIMO System for 5G Applications 31 G. Indumathi, J. Roscia Jeya Shiney and Shashi Kant Dargar 3.1 Introduction 32 3.2 Beam-Space Massive MIMO System 34 3.2.1 System Model 36 3.2.2 Saleh-Valenzuela Channel Model 37 3.3 Array Response Vector 37 3.3.1 mmWave Beam-Space Massive (mWBSM)-MIMO System 38 3.4 Discrete Lens Antenna Array 39 3.5 Beam Selection Algorithm 42 3.6 Mean Sum Assignment-Based Beam User Association 45 3.6.1 Performance Evaluation 46 3.7 Conclusion 49 References 49 Part II: Oscillator & Amplifier 53 4 Gain-Bandwidth Enhancement Techniques for mmWave Fully-Integrated Amplifiers 55 Shalu C., Shakti Sindhu and Amitesh Kumar 4.1 RLC Tank 56 4.1.1 RC Low-Pass (LP) Filter 56 4.1.2 RLC Band-Pass (BP) Filter 56 4.2 Coupled Resonators 57 4.2.1 Bode-Fano (B-F) Limit 57 4.2.2 Capacitively Coupled Resonators 59 4.2.3 Inductively Coupled Resonators 60 4.2.4 Magnetically Coupled Resonators 60 4.2.5 Magnetically and Capacitive Coupled Resonator 61 4.2.6 Coupled Resonators Comparison 62 4.3 Resonators Based on the Transformers 63 4.3.1 On the Parasitic Interwinding Capacitance 63 4.3.2 Effect of Unbalanced Capacitive Terminations 64 4.3.3 Frequency Response Equalization 65 4.3.4 On the Parasitic Magnetic Coupling in Multistage Amplifiers 66 4.3.5 Extension to Impedance Transformation 67 4.3.6 On the kQ Product 67 4.3.7 Transformer-Based Power Dividers (PDs) 68 4.3.8 Transformer-Based Power Combiners (PCs) 69 4.4 Conclusion 69 Acknowledgments 70 References 70 5 Low-Noise Amplifiers 73 Jyoti Priya, Sangeeta Singh and Bambam Kumar 5.1 Introduction 73 5.2 Basics of RFIC 75 5.2.1 Voltage Gain in dB 75 5.2.2 Power Gain in dB 75 5.2.3 Issues in RF Design 75 5.3 Structure of MOSFET 81 5.4 Bandwidth Estimation Techniques 84 5.5 Noise 88 5.5.1 Noise in MOSFET 89 5.6 Different Topologies of LNA 92 Conclusion 103 Acknowledgement 103 References 104 6 Mixer Design 107 Brajendra Singh Sengar and Amitesh Kumar 6.1 Introduction 107 6.2 Properties 109 6.3 Diode Mixer 114 6.4 Transistor Mixer 116 6.5 Conclusion 119 Acknowledgement 119 References 119 7 RF LC VCOs Designing 123 M. Sankush Krishna, Madhuraj Kumar, Neelesh Pratap Singh and Anjan Kumar 7.1 Introduction 124 7.1.1 Basic VCO Models 124 7.1.2 Phase Noise 125 7.1.3 Flicker Noise 126 7.1.4 Distributed Oscillators 128 7.2 Tuning Extension Techniques 129 7.2.1 Varactor 129 7.2.2 Switched Capacitors 130 7.2.3 Switched Inductors 131 7.2.4 Switched TLs 132 7.2.5 4th Order Tanks and Other Techniques 132 7.3 Conclusion 133 Acknowledgement 133 References 134 8 RF Power Amplifiers 137 Anchal Tyagi, Rachit Patel and Krishna Pandey 8.1 Specification 137 8.1.1 Efficiency 138 8.1.2 Generic Amplifier Classes 138 8.1.3 Heating 139 8.1.4 Linearity 139 8.1.5 Ruggedness 140 8.2 Bipolar PA Design 140 8.3 CMOS Power Amplifier Design 142 8.3.1 Performance Parameters 143 8.3.1.1 Linearity 143 8.3.1.2 Gain 143 8.3.1.3 Efficiency 144 8.3.1.4 Output Power 144 8.3.1.5 Power Consumption 144 8.3.2 Drawbacks of CMOS Power Amplifier 144 8.3.3 Design of CMOS Power Amplifier 145 8.3.3.1 Common Cascode PA Design 145 8.3.3.2 Self-Bias Cascode PA Design 146 8.3.3.3 Differential Cascode PA Design 147 8.3.3.4 Power Combining PA Design 147 8.4 Linearization Principles: Predistortion Technique, Phase-Correcting Feedback, Envelope Elimination and Restoration (EER), Cartesian Feedback 148 8.4.1 Predistortion Linearization Technique 148 8.4.2 Phase Correcting Feedback Technique 150 8.4.3 Cartesian Feedback Technique 151 8.4.4 Envelope Elimination and Restoration Technique 152 Acknowledgement 154 References 154 9 RF Oscillators 157 Pramila Jakhar and Amitesh Kumar 9.1 Introduction 157 9.2 Specifications 159 9.2.1 Frequency and Tuning 159 9.2.2 Tuning Constant and Linearity 159 9.2.3 Power Dissipation 160 9.2.4 Phase to Noise Ratio 160 9.2.5 Reciprocal Mixing 160 9.2.6 Signal to Noise Degradation of FM Signals Spurious Emission 161 9.2.7 Harmonics, I/Q Matching, Technology and Chip Area 161 9.3 LC Oscillators 162 9.3.1 Frequency, Tuning and Phase Noise Frequency Tuning Phase Noise to Carrier Ratio 163 9.3.2 Topologies 164 9.3.3 NMOS Only Cross-Coupled Structure 164 9.3.4 RC Oscillators 165 9.4 Design Examples 167 9.4.1 830 MHz Monolithic LC Oscillator Circuit Design Measurements 167 9.4.2 A 10 GHz I/Q RC Oscillator with Active Inductors 167 9.5 Conclusion 168 Acknowledgement 168 References 169 Part III: RF Circuit Applications 171 10 mmWave Highly-Linear Broadband Power Amplifiers 173 Shalu C., Shakti Sindhu and Amitesh Kumar 10.1 Basics of PAs 173 10.1.1 Single Transistor Amplifier 173 10.1.2 Trade-Offs Among Power Amplifier Design Parameters (P 0 , PAE and Linearity) 174 10.1.3 Harmonic Terminations and Switching Amplifiers 175 10.1.4 Challenges at Millimeter-Wave 177 10.2 Millimeter Wave-Based AB Class PA 177 10.2.1 Efficiency at Power Back-Off 178 10.2.2 Sources of AM-PM Distortion 178 10.2.3 Distortion Cancellation Techniques 179 10.2.3.1 Input PMOS Varactors 179 10.2.3.2 Complementary N-PMOS Amplifier 180 10.2.3.3 Degeneration Inductance 180 10.2.3.4 Harmonic Traps 180 10.3 Design Example: A Highly Linear Wideband PA in 28 nm CMOS 181 10.3.1 Transformer-Based Output Combiner and Inter-Stage Power Divider 182 10.3.2 More on the kQ Product 183 10.4 Conclusion 185 Acknowledgments 185 References 186 11 FinFET Process Technology for RF and Millimeter Wave Applications 189 A. Theja, Vikas A., Meena Panchore and Kanchan Cecil 11.1 Evaluation of FinFET Technology 189 11.1.1 Steps of Fabrication and Process Flow of FinFET Technology 191 11.1.2 Digital Performance 193 11.1.3 Analog/RF Performance 195 11.2 Distinct Properties of FinFET 197 11.2.1 Performance with Transistor Scaling 198 11.2.2 Nonlinear Gate Resistance by Three Dimensional Structure 199 11.2.3 Self-Heating Effect in FinFETs 202 11.3 Assessment of FinFET Technology for RF/mmWave Applications 203 11.3.1 RF Performance 204 13.3.1.1 Parasitic Extraction 206 11.3.2 Noise Performance 208 11.3.3 Noise Matching with Gain at the mmWave Frequency 210 11.4 Design Process of FinFET for RF/mmWave Performance Optimization 211 11.4.1 Cascaded Chain Design Consideration for Wireless System 212 11.4.2 Optimization of Noise Figure with G max for LNA Within Self-Heat Limit 213 11.4.3 Gain Per Power Efficiency 215 11.4.4 Linearity for Gain and Power Efficiency 217 11.4.5 Neutralization for mmWave Applications 219 References 220 12 Pre-Distortion: An Effective Solution for Power Amplifier Linearization 223 Gaurav Bhargava and Shubhankar Majumdar 12.1 Introduction 223 12.2 Standard Measures of Nonlinearity of Power Amplifier 224 12.2.1 Gain Compression Point (1 dB) 225 12.2.2 Harmonic and Intermodulation Distortion (IMD) 225 12.2.3 Third-Order Intercept Point (TOI) 227 12.2.4 AM/AM and AM/PM Distortion 227 12.2.5 Adjacent Channel Power Ratio (ACPR) 228 12.2.6 Error Vector Magnitude (EVM) 229 12.3 What is Linearization? 230 12.3.1 Feed Forward Linearization 230 12.3.2 Feedback Linearization 231 12.3.3 Pre-Distortion Linearization 231 12.4 Example of Analog Pre-Distortion-Based Class EFJ Power Amplifier 234 Conclusion and Future Scope 237 References 238 13 Design of Control Circuit for Mitigation of Shadow Effect in Solar Photovoltaic System 241 Dhvanit Bhavsar, Shubham Bhatt, Siddhi Vinayak Pandey and Alok Kumar Singh 13.1 Introduction 242 13.2 Proposed Methodology 246 13.3 Results and Discussion 260 13.4 Conclusion 263 Acknowledgement 263 References 264 Part IV: RF Circuit Modeling 267 14 HBT High-Frequency Modeling and Integrated Parameter Extraction 269 Ashish Bhatnagar and Rachit Patel 14.1 HBT High-Frequency Modeling and Integrated Parameter Extraction 269 14.2 High-Frequency HBT Modeling 270 14.2.1 DC and Small Signal Models 271 14.2.2 Linearized T-Model 272 14.2.3 Linearized Hybrid pi model 272 14.3 Integrated Parameters Extraction 275 14.3.1 Formulation of Integrated Parameter Extraction 275 14.3.2 Optimization of Model 276 14.4 Noise Model Validation 276 14.5 Parameters Extraction of an HBT Model 276 Acknowledgement 277 References 277 15 Non-Linear Microwave Circuit Design Using Multi-Harmonic Load-Pull Simulation Technique 279 Veral Agarwal and Rachit Patel 15.1 Introduction 279 15.2 Multi-Harmonic Load-Pull Simulation Using Harmonic Balance 280 15.2.1 Formulation of Multi-Harmonic Load-Pull Simulation 280 15.2.2 Systematic Design Procedure 281 15.3 Application of Multiharmonic Load-Pull Simulation 282 15.3.1 Narrowband Power Amplifier Design 282 15.3.2 Frequency Doubler Design 285 References 287 16 Microwave RF Designing Concepts and Technology 289 Madhu Raj Kumar and Neelesh Pratap Singh 16.1 Introduction 289 16.1.1 Gain 290 16.1.2 Noise 290 16.1.3 Non Linearity 291 16.1.4 Sensitivity 295 16.2 Microwave RF Device Technology and Characterization 296 16.2.1 Characterization and Modeling 296 16.2.2 Modeling 296 16.2.3 Cut-Off Frequency 298 16.2.4 Maximum Oscillation Frequency 299 16.2.5 Input Limited Frequency 301 16.2.6 Output Limited Frequency 301 16.2.7 Maximum Available Frequency 302 16.2.8 Technology Choices 302 16.2.9 Double Poly Devices 303 16.3 Passive Components 303 16.3.1 Resistors 304 16.3.2 Capacitors 304 16.3.3 Inductors 307 Conclusion 309 Acknowledgement 309 References 309 Index 313