Sustainable Practices in the Textile Industry
Autor LJ Ratheren Limba Engleză Hardback – 9 sep 2021
Preț: 910.22 lei
Preț vechi: 1361.56 lei
-33% Nou
Puncte Express: 1365
Preț estimativ în valută:
174.39€ • 183.60$ • 143.94£
174.39€ • 183.60$ • 143.94£
Carte indisponibilă temporar
Doresc să fiu notificat când acest titlu va fi disponibil:
Se trimite...
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9781119818885
ISBN-10: 1119818885
Pagini: 368
Dimensiuni: 152 x 229 x 22 mm
Greutate: 0.45 kg
Editura: Wiley
Locul publicării:Hoboken, United States
ISBN-10: 1119818885
Pagini: 368
Dimensiuni: 152 x 229 x 22 mm
Greutate: 0.45 kg
Editura: Wiley
Locul publicării:Hoboken, United States
Notă biografică
Luqman Jameel Rather is working as senior visiting scholar at the State Key Laboratory of Silkworm Genome Biology, Southwest University, Chongqing, P.R. China. He earned his doctorate degree in Organic Chemistry from Jamia Millia Islamia, New Delhi, India in 2017. He has published about 50 research publications in high impact scientific journals of international repute and has been awarded the Young Scientist Award through the National Agriculture Development Agency, India. His research is focused on functional finishing of textile materials. Mohd Shabbir joined Wuhan Institute of Technology, School of Chemical Engineering and Pharmacy in September 2019 as a postdoctoral researcher. Prior to that he had been working as an assistant professor in the Department of Chemistry, Sanskriti University (Mathura/India), and NIET, greater Noida, India. He obtained his PhD in 2017 from Jamia Millia Islamia, New Delhi, India. He has edited two books with the Wiley-Scrivener imprint. Aminoddin Haji obtained his PhD from Amirkabir University of Technology, Tehran, Iran. He is an assistant professor in the Department of Textile Engineering, Yazd University, Iran. His area of interest is surface modification of textiles; natural and synthetic dyeing of textiles and nanotechnology in textiles and wastewater treatment. He has published more than 50 papers in international journals (ISI and Scopus) and presented more than 50 papers in international conferences.
Cuprins
Preface xv
Part 1: Sustainable Dye Extraction and Dyeing Techniques 1
1 Extraction and Application of Natural Dyes 3
Sanjeeda Iqbal and Taiyaba Nimra Ansari
1.1 Introduction 4
1.2 What are Natural Dyes? 6
1.3 Why Natural Dyes? 7
1.4 What are Synthetic Dyes? 8
1.5 Sources of Natural Dyes 9
1.6 Types of Natural Dyes 10
1.6.1 Classification on the Basis of Their Chemical Constitution 10
1.6.2 Classification Based on Method of Application/Preparation 11
1.7 Natural Dyes Need Fixing Agent (Mordants) for Bonding 13
1.7.1 Metallic Mordants 13
1.7.2 Tannins and Tannic Acid 14
1.7.3 Oil Mordants 14
1.7.4 Bio-Mordants 14
1.7.5 Method of Application 16
1.8 Fibers/Fabrics Used for Natural Dyeing 16
1.8.1 Cellulosic Fiber 16
1.8.2 Protein Fiber 16
1.8.3 Synthetic Fiber 17
1.9 Extraction of Natural Dyes 17
1.10 Dyeing Process 18
1.10.1 Preparation of Fabric Before Dyeing 18
1.10.2 Mechanism of Dyeing 19
1.10.3 Process of Dyeing 19
1.11 Evaluation of the Dyed Fabric 24
1.11.1 Color Strength or K/S Value 24
1.11.2 Color Fastness Properties 25
1.12 Some Special Characteristics of Naturally Dyed Fabric 26
1.12.1 Antimicrobial Properties 26
1.12.2 UV Protection 26
1.12.3 Deodorizing Finishing 27
1.12.4 Moth Resistant and Insect Repellent 27
1.13 Conclusion 27
1.13.1 Overview 29
1.13.2 Legislative Regulations for Synthetic Dyes 30
1.13.3 Sustainability Aspects of Natural Dyes 30
1.13.4 Practicality of Natural Dyes 32
Acknowledgement 32
References 33
2 Recent Advances in Non-Aqueous Dyeing Systems 43
Omer Kamal Alebeid, Elwathig A.M. Hassan and LiujunPei
2.1 Introduction 43
2.2 Supercritical Fluid Dyeing System 44
2.2.1 Application of Supercritical CO2 on Synthetic Fabric 46
2.2.2 Application of Supercritical CO2 on Natural Fabric 48
2.2.3 Dyes Solubility in Supercritical Fluids 56
2.3 Reverse Micelle Systems 57
2.3.1 Mechanism and Formation of Reverse Micelle 57
2.3.2 Application of Reverse Micelle Dyeing System 59
2.4 Solvent Dyeing 61
2.5 Silicone Non-Aqueous Dyeing 62
2.6 Conclusion 68
References 68
3 Structural Coloration of Textile Materials 75
Showkat Ali Ganie and Qing Li
3.1 Introduction 75
3.2 Thin-Film Interference 77
3.2.1 Principle of Thin-Film Interference 78
3.2.2 Multilayer Interference 79
References 84
4 Enzymatic Wet Processing 87
Mohammad Toufiqul Hoque, Nur-Us-Shafa Mazumder and Mohammad Tajul Islam
4.1 Introduction 87
4.2 Enzymes 89
4.3 Function of Enzymes 89
4.4 Classification of Enzymes 89
4.5 Alphan-Amylase Enzyme for Desizing 92
4.6 Pectinase Enzyme for Scouring 93
4.7 Protease Enzyme for Wool Anti-Felting 94
4.8 Cellulase Enzyme for Biopolishing and Biostoning 96
4.9 Hairiness Removal Mechanism 98
4.9.1 During Scouring and Bleaching in Alkaline Condition 98
4.9.2 Applying Before Dyeing in Acidic Condition 99
4.10 Enzyme Decolorization of Textile Effluent 100
4.11 Enzymes for Increasing Dyeability of Different Fibers 101
4.11.1 Application on Cotton 101
4.11.2 Application on Nylon 103
4.12 Conclusion 104
References 105
Part 2: Sustainable Functional Finishing of Various Textile Materials 111
5 Coating Textiles: Towards Sustainable Processes 113
Imene Ghezal
5.1 Introduction 114
5.2 Most Used Polymers for Coating Textiles 114
5.2.1 Polytetrafluoroethylene (PTFE) 114
5.2.2 Polyvinyl Acetate (PVAc) 115
5.2.3 Polyvinyl Alcohol (PVA) 116
5.2.4 Polyurethanes (PUs) 116
5.2.5 Polyvinyl Chloride (PVC) and Polyvinylidene Chloride (PVDC) 116
5.2.6 Polysiloxanes 118
5.2.7 Acrylics 118
5.2.8 Phosphorous-Based Polymers 118
5.3 Traditional Coating Methods 118
5.4 Environmental Friendly Polymers 121
5.4.1 Cyclodextrins 121
5.4.2 Chitin and Chitosan 123
5.4.3 Sodium Alginate 123
5.4.4 Polyethylene Glycols 124
5.4.5 Natural Rubber 125
5.4.6 Polyvinyl Alcohol 126
5.4.7 Dendrimers 127
5.4.8 Sericin 127
5.4.9 Polyphenols 128
5.5 Sustainable Coating Technologies 129
5.5.1 Powder Coating Technique 129
5.5.2 Sol-Gel Technology 130
5.5.3 Plasma Treatment 131
5.5.4 Electro-Fluidodynamic Technology 132
5.5.5 Supercritical Fluid Technology 133
5.5.6 Vapor Deposition Methods 134
5.6 Conclusion 135
References 136
6 A Review on Hydrophobicity and Fabricating Hydrophobic Surfaces on the Textiles 149
Mohammad Khajeh Mehrizi and Zahra Shahi
6.1 Introduction 149
6.2 Self-Cleaning Surfaces 151
6.3 Applications of Hydrophobic Surfaces 151
6.4 Basic Theories: Modeling of Contact Angle 152
6.4.1 Young's Model 152
6.4.2 Wenzel Model (Homogeneous Interface) 152
6.4.3 Cassie-Baxter Model (Composite Interface) 153
6.5 Techniques to Make Super-Hydrophobic Surfaces 154
6.6 Methods of Applying Hydrophobic Coating on Textiles 156
6.6.1 Dip-Coating 156
6.6.2 Spray Coating 156
6.7 Contact Angles (CA) Measurement 156
6.8 Research Records on Hydrophobic Surface Production 157
6.9 Conclusion 162
References 163
7 UV Protection: Historical Perspectives and State-of-the-Art Achievements 167
Narcisa Vrinceanu and Diana Coman
7.1 Introduction 167
7.2 Fundamentals Regarding UV Protection of Textile Fabrics 169
7.2.1 The Design of the Woven Support Represents a Relevant Factor That Directly Affect UPF 171
7.2.2 The Synergism Between Structural Parameters and UV Protection of Textile Supports 172
7.2.3 Yarn Curve End up Being the Significant Determinant of the UV Security Attributes of Textile Supports 172
7.2.4 The Correlation Between Fabric Porosity and Cover Factor and UV Protection 172
7.2.5 Concepts of Ultraviolet Protection Factor and Sun Protection Factor 173
7.3 UV Stabilizers Beginnings and Initial Development 178
7.3.1 UV Protection Finishing of Fabrics Using Nanoparticles 178
7.3.1.1 Inorganic Formulations With Nano-ZnO Particles 178
7.3.1.2 UV Shield of Cotton Support Conferred by TiO2 Nanoparticles 179
7.3.1.3 Formulations Containing Nanoparticles of ZnO, Titania, Silica, Silver, Carbon-Nanotubes, Graphene and Silver Onto Cotton Textiles 180
7.3.2 UV Protection of Fabrics by Dyeing of Textile Supports 181
7.3.3 Other Kind of Finishes 182
7.4 Conclusion 182
References 188
8 Synthetic and Natural UV Protective Agents for Textile Finishing 207
Iftay Khairul Alam, Nazia Nourin Moury and Mohammad Tajul Islam
8.1 Introduction 207
8.2 Ultraviolet Radiation (UVR) 208
8.3 Importance of Ultraviolet Protective Finish 209
8.3.1 Ultraviolet Protection With Textiles 211
8.4 Methods of Blocking Ultraviolet Rays 212
8.5 Ultraviolet Protection Factor Measurement System 214
8.5.1 In Vitro 214
8.5.2 In Vivo 215
8.6 Clothing Factors Affecting Ultraviolet Protection Factor 216
8.6.1 Fabric Structure 217
8.6.2 Fiber Physio-Chemical Nature 218
8.6.3 Dyeing 218
8.7 Mechanisms of UV Protection 220
8.8 Types of Ultraviolet Absorbers 223
8.8.1 Organic 223
8.8.2 Inorganic 223
8.9 Commercial Ultraviolet Protective Clothing 225
8.10 Nanoparticle Coatings for Ultraviolet Protective Textiles 226
8.11 Durability of Ultraviolet Protective Finish 228
8.12 Conclusion 231
References 232
9 Sustainable Orientation of Textile Industry Companies 237
Gherghel Sabina
9.1 Introduction 238
9.2 Textile Industry--Environmental, Social and Economic Issues 239
9.3 Circular Economy 243
9.4 Sustainability Circles 244
9.5 Circularity in the Supply Chain 245
9.6 Consumer Behavior of Sustainable Textile Products 247
9.7 Decision to Purchase Sustainable Textile Products 248
9.8 Policies and Strategies Used in the Sustainable Textile Industry 249
9.9 Conclusions 250
References 250
Part 3: Sustainable Wastewater Remediation 253
10 Sustainable Application of Ionic Flocculation Method for Textile Effluent Treatment 255
Hamadia Sultana, Muhammad Usman, Abdul Ghaffar, Tanveer Hussain Bokhari, Asim Mansha and Amnah Yusaf
10.1 Introduction 255
10.2 Conventional Methods for Degradation of Textile Effluents 256
10.2.1 Biological Methods 257
10.2.2 Chemical Methods 257
10.2.3 Physical Methods 257
10.3 Surfactants 258
10.4 Adsorptive Micellar Flocculation (AMF) 260
10.5 Mechanism 260
10.6 Choice of Flocculant 261
10.7 Analysis and Calculations 262
10.7.1 Analysis of Reagents 262
10.7.2 Calculated Parameters 262
10.8 Optimization of Conditions for Better Removal of Dye Using AMF 264
10.8.1 Effect of Temperature 264
10.8.2 Effect of pH 264
10.8.3 Surfactant Dosage 265
10.8.4 Flocculant/Surfactant Ratio 265
10.8.5 Addition of Electrolyte 265
10.8.6 Contact Time and Stirring Speed 266
10.9 Potential Advantages of AMF 266
10.10 Application to Wastewaters 266
10.11 Conclusion 267
10.12 Future Prospective 267
References 268
11 Remediation of Textile Wastewater by Ozonation 273
Astha Gupta, Suhail Ayoub Khan and Tabrez Alam Khan
11.1 Introduction 273
11.2 Sources of Wastewater 274
11.3 Ozonation Remediation for Textile Water 275
11.3.1 Impact of pH on Uptake of Organic Pollutants 276
11.3.2 Impact of Initial Dye Concentration 277
11.3.3 Impact of Inlet Ozone Concentration 278
11.3.4 Impact of Ozonation Time 278
11.4 Impact of Various Techniques in Combination Ozonation Process for Treatment of Textile Wastewater 279
11.5 Degradation of Dyes via Ozonation 279
11.6 Conclusion 281
References 281
12 Design of a New Cold Atmospheric Plasma Reactor Based on Dielelectric Barrier Discharge for the Treatment and Recovery of Textile Dyeing Wastewater: Profoks/CAP Reactor 285
Lokman Hakan Tecer and Ali Mutlu Gündüz
12.1 Introduction 286
12.2 Advanced Oxidation Processes (AOP) in Wastewater Treatment 287
12.2.1 Cold Atmospheric Plasma Technology (CAP) 288
12.2.2 Formation and Chemical Reactivity of Reactive Oxygen Species (ROS) 289
12.2.3 CAP/AOP Application in Textile Wastewater Treatment 291
12.3 Profoks/CAP Wastewater Treatment and Water Recovery System 293
12.3.1 Profoks/CAP Wastewater Treatment and Water Recovery System and Textile Wastewater Recovery Studies 296
12.3.2 Profoks/CAP Wastewater Treatment and Water Recovery System and the Results of Treatability of Textile Wastewater and the Study of Water Recovery 296
12.3.3 Profoks/CAP Wastewater Treatment and Water Recovery System Investment and Operating Costs 299
12.4 Conclusion 301
References 302
13 Nanotechnology and its Application in Wastewater Treatment 307
Nitu Singh, Manzoor Ahmad Malik and Athar Adil Hashmi
13.1 Introduction 308
13.2 Nanotechnology 309
13.2.1 Adsorption 309
13.2.1.1 Carbon-Based Nanoadsorbents 310
13.2.1.2 Metal-Based Nanoadsorbents 312
13.2.1.3 Polymeric Nanoadsorbents 313
13.2.1.4 Zeolites 314
13.2.2 Membrane-Based Techniques 314
13.2.2.1 Nanofiber Membranes 315
13.2.2.2 Nanocomposite Membranes 316
13.2.2.3 Thin Film Nanocomposite Membranes 317
13.2.2.4 Nanofiltration Membranes 317
13.2.2.5 Aquaporin-Based Membranes 318
13.2.3 Metal Nanoparticles 319
13.2.3.1 Silver Nanoparticles 319
13.2.3.2 Iron Nanoparticles 319
13.2.3.3 Titanium Dioxide Nanoparticles 320
13.3 Conclusion 320
References 321
Index 333