Cantitate/Preț
Produs
Total produse
Vezi coșul
An Introduction to Well Control Calculations for Drilling Operations de Dave Cormack

An Introduction to Well Control Calculations for Drilling Operations

Autor Dave Cormack
en Limba Engleză Hardback – 29 aug 2017
This book removes the mystery and pressure from calculations by equipping readers with the tools they need to understand calculations and how they work. This is done by using straight-forward language and showing fully worked out, rig-based examples throughout. The book comprises of mini lessons which are never more than two pages long and a complete lesson is always in view when the book is open in front of you. Lessons progress in a logical manner and once the book is finished, the reader is ready for any calculations that could be encountered at well control school.
It is a great tool for rig crew members who are afraid of calculations or have not done any math since school.  I found it easy to follow with clear explanations and it flowed from topic to topic.  A definite addition to the rig crews training toolbox.
 
Malcolm Lodge (at the time of writing Technical Director of the Well Control Institute)

Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 58275 lei  38-44 zile
  Springer International Publishing – 11 aug 2018 58275 lei  38-44 zile
Hardback (1) 99372 lei  6-8 săpt.
  Springer International Publishing – 29 aug 2017 99372 lei  6-8 săpt.

Preț: 99372 lei

Preț vechi: 121186 lei
-18% Nou

Puncte Express: 1491
Preț estimativ în valută:
19017€ • 19812$ • 15812£

Carte tipărită la comandă

Livrare economică 11-25 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319631899
ISBN-10: 3319631896
Pagini: 230
Ilustrații: IX, 299 p. 1 illus. in color.
Dimensiuni: 178 x 254 mm
Greutate: 0.76 kg
Ediția:1st ed. 2017
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland

Cuprins

Chapter One - Getting a Handle on Calculations.- Chapter Two - Volume Calculations.- Chapter Three - Pressure Calculations.- Chapter Four - Well Control Calculations.

Notă biografică

Dave Cormack has worked in the drilling industry out of Aberdeen, Scotland since 1983.  He has worked on over thirty drilling rigs, platforms or MODU’s either as a member of the drill crew or in a training capacity.  Since 1991 he has been exclusively involved in training drilling personnel either on the rig, in the classroom or in a management capacity worldwide.  He served a three-year term on the Board of Directors of the International Well Control Forum and was one of the contributing authors to the Well Control chapter in the recently revised International Association of Drilling Contractors definitive Drilling Manual.  He has been involved in well control training on every continent on earth bar the polar ones, has published two SPE papers and made presentations on training at global drilling conferences.  Dave still teaches well control regularly to both international certification standards and also runs courses globally, training the next wave of well control assessors for IWCF. He is passionate about helping students through their two yearly well control school and firmly believes that a solid grasp of calculation skills frees them up to  concentrate on learning well control.

Textul de pe ultima copertă

This book removes the mystery and pressure from calculations by equipping readers with the tools they need to understand calculations and how they work. This is done by using straight-forward language and showing fully worked out, rig-based examples throughout. The book comprises of mini lessons which are never more than two pages long and a complete lesson is always in view when the book is open in front of you. Lessons progress in a logical manner and once the book is finished, the reader is ready for any calculations that could be encountered at well control school.
It is a great tool for rig crew members who are afraid of calculations or have not done any math since school.  I found it easy to follow with clear explanations and it flowed from topic to topic.  A definite addition to the rig crews training toolbox.
 
Malcolm Lodge (at the time of writing Technical Director of the Well Control Institute)

Caracteristici

Offers a lesson on every page - no need to turn the page to finish learning something Contains clear, rig-friendly language Includes rig-based examples with fully worked out and explained answers Gives the calculations skills needed at well control school Contains clear images with clear explanations at the exact time needed in the lesson Also known as " The Roughneck's Guide to Drilling Calculations" Includes supplementary material: sn.pub/extras