Cantitate/Preț
Produs
Total produse
Vezi coșul
Challenges in Mechanics of Time Dependent Materials, Mechanics of Biological Systems and Materials & Micro-and Nanomechanics, Volume 2: Proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics de Alireza Amirkhizi

Challenges in Mechanics of Time Dependent Materials, Mechanics of Biological Systems and Materials & Micro-and Nanomechanics, Volume 2: Proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics: Conference Proceedings of the Society for Experimental Mechanics Series

Editat de Alireza Amirkhizi, Jacob Notbohm, Nikhil Karanjgaokar, Frank W DelRio
en Limba Engleză Paperback – 15 dec 2022
Challenges in Mechanics of Time-Dependent Materials, Mechanics of Biological Systems and Materials, and Micro-and Nanomechanics, Volume 2 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the second volume of four from the Conference, brings together contributions to this important area of research and engineering.  The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas:
 Characterization Across Length Scales
Extreme Conditions & Environmental Effects
Damage, Fatigue and Fracture
Structure, Function and Performance Rate Effects in Elastomers
Viscoelasticity & Viscoplasticity
Research in Progress
Extreme Nanomechanics
In-Situ Nanomechanics
Expanding Boundaries in Metrology
Micro and Nanoscale Deformation MEMS for Actuation, Sensing and Characterization
1D & 2D Materials
Cardiac Mechanics
Cell Mechanics
Biofilms and Microbe Mechanics
Traumatic Brain Injury
Orthopedic Biomechanics Ligaments and Soft Materials
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 137510 lei  6-8 săpt.
  Springer International Publishing – 15 dec 2022 137510 lei  6-8 săpt.
Hardback (1) 138300 lei  3-5 săpt.
  Springer International Publishing – 14 dec 2021 138300 lei  3-5 săpt.

Din seria Conference Proceedings of the Society for Experimental Mechanics Series

Preț: 137510 lei

Preț vechi: 167696 lei
-18% Nou

Puncte Express: 2063
Preț estimativ în valută:
26314€ • 27508$ • 22237£

Carte tipărită la comandă

Livrare economică 06-20 martie

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783030867393
ISBN-10: 3030867390
Pagini: 103
Ilustrații: VII, 103 p. 79 illus., 66 illus. in color.
Dimensiuni: 210 x 279 mm
Greutate: 0.27 kg
Ediția:1st ed. 2022
Editura: Springer International Publishing
Colecția Springer
Seria Conference Proceedings of the Society for Experimental Mechanics Series

Locul publicării:Cham, Switzerland

Cuprins

Chapter 1. Advance of Collaborative Twinning Fields in Magnesium AZ31 via the Strain and Residual Intensity Channels in Microscopic Image Correlation.- Chapter 2. Time Dependent Materials Response of Transverse Impact on Model Beams.- Chapter 3. Wearable Device for Tremor Suppression.- Chapter 4. Fractional Viscoelastic Modeling Enabling Accurate Atomic Force Microscope Contact Resonance Spectroscopy Characterization.- Chapter 5. A Method for Measuring Displacement and Strain Around a Crack of Rubber Sheets Using Digital Image Correlation.- Chapter 6. Understanding the Nano-scale Deformation Mechanisms of Polyurea from in-situ AFM Tensile Experiments.- Chapter 7. Porosity Determination and Classification of Laser Powder Bed Fusion AlSi10Mg Dogbones Using Machine Learning.- Chapter 8. Constitutive Modelling of the Dynamic Behavior of Cork Material.- Chapter 9. The Penetration Dynamics of a Violent Cavitation Bubble through a Hydrogel-water Interface.- Chapter 10. Effects of Hydration onthe Mechanical Response of a PVA Hydrogel.- Chapter 11. Gaussian Process to Identify Hydrogel Constitutive Model.- Chapter 12. Effect of Host Surface Factors on Biocompatible Adhesion Index.- Chapter 13. Mass Mitigation in Structural Designs Via Dynamic Properties.- Chapter 14. High Temperature Burst Creep Properties of Nuclear-grade FeCrAl Fuel Cladding.

Notă biografică

Dr. Alireza  Amirkhizi University is with the Massachusetts- Lowell , USA; Dr. Jacob Notbohm is with the University of Wisconsin-Madison, USA; Dr. Nikhil Karanjgaokar is with the Worcester Polytechnic Institute,UM, USA; and  Dr. Frank DelRio is with the National Institutes of Standards and Technology, Boulder, CO, USA.  

Textul de pe ultima copertă

Challenges in Mechanics of Time-Dependent Materials, Mechanics of Biological Systems and Materials, and Micro-and Nanomechanics, Volume 2 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the second volume of four from the Conference, brings together contributions to this important area of research and engineering.  The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length Scales

Extreme Conditions & Environmental Effects
Damage, Fatigue and Fracture
Structure, Function and Performance Rate Effects in Elastomers
Viscoelasticity & Viscoplasticity
Research in Progress
Extreme Nanomechanics
In-Situ Nanomechanics
Expanding Boundaries in Metrology
Micro and Nanoscale Deformation MEMS for Actuation, Sensing and Characterization
1D & 2D Materials
Cardiac Mechanics
Cell Mechanics
Biofilms and Microbe Mechanics
Traumatic Brain Injury
Orthopedic Biomechanics Ligaments and Soft Materials