Design to Manufacture of Complex Building Envelopes: Single Layer Envelopes: Mullion-Transom Systems + 3D printed Metal Nodes: Mechanik, Werkstoffe und Konstruktion im Bauwesen, cartea 56
Autor Alamir Mohsenen Limba Engleză Paperback – 15 mai 2020
Parametric design and additive manufacturing are both growing trends that open up new possibilities. Parametric design approaches change how planners / designers perceive building details. Further, new engineering concepts are needed to cope with the increasing complexity of architectural geometries due to the rapid developments in areas such as façade systems, modeling software and digital manufacturing techniques.
Din seria Mechanik, Werkstoffe und Konstruktion im Bauwesen
- 13%
Preț: 463.80 lei - 13%
Preț: 429.63 lei - 15%
Preț: 508.99 lei -
Preț: 433.97 lei -
Preț: 336.70 lei -
Preț: 400.35 lei -
Preț: 363.41 lei -
Preț: 425.57 lei -
Preț: 458.85 lei -
Preț: 199.71 lei -
Preț: 300.36 lei -
Preț: 298.56 lei -
Preț: 366.82 lei -
Preț: 369.06 lei - 15%
Preț: 662.83 lei -
Preț: 365.61 lei -
Preț: 404.69 lei -
Preț: 262.75 lei -
Preț: 406.71 lei -
Preț: 430.30 lei -
Preț: 393.40 lei -
Preț: 398.50 lei - 18%
Preț: 745.41 lei - 18%
Preț: 745.41 lei - 18%
Preț: 741.51 lei - 18%
Preț: 737.63 lei - 15%
Preț: 428.36 lei -
Preț: 362.16 lei - 15%
Preț: 494.92 lei
Preț: 605.98 lei
Preț vechi: 712.91 lei
-15% Nou
Puncte Express: 909
Preț estimativ în valută:
115.99€ • 124.72$ • 96.70£
115.99€ • 124.72$ • 96.70£
Carte tipărită la comandă
Livrare economică 19 decembrie 24 - 02 ianuarie 25
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9783658302030
ISBN-10: 3658302038
Ilustrații: XIII, 230 p.
Dimensiuni: 168 x 240 mm
Greutate: 0.4 kg
Ediția:1st ed. 2020
Editura: Springer Fachmedien Wiesbaden
Colecția Springer Vieweg
Seria Mechanik, Werkstoffe und Konstruktion im Bauwesen
Locul publicării:Wiesbaden, Germany
ISBN-10: 3658302038
Ilustrații: XIII, 230 p.
Dimensiuni: 168 x 240 mm
Greutate: 0.4 kg
Ediția:1st ed. 2020
Editura: Springer Fachmedien Wiesbaden
Colecția Springer Vieweg
Seria Mechanik, Werkstoffe und Konstruktion im Bauwesen
Locul publicării:Wiesbaden, Germany
Cuprins
Introduction.- State oft he Art.- Methods of manufacturing | AM of Metals.- Design Development.- Proof of Concept.- Li3-Method.- Summary and Outlook.
Notă biografică
Alamir Mohsen received his bachelor degree in Architecture in 2007. From 2007 to 2012, he worked as a technical architect and designer at various international companies in Cairo, Egypt, where he planned and designed several projects in the Middle East. From 2012 to 2014, he completed his master's degree in Façade Engineering at the University of Applied Sciences in Detmold, Germany. From 2014 to 2018, he worked as a façade engineer at Bollinger und Grohman Ingenieure in Frankfurt, Germany. From 2014 to 2019, he was a research assistant and lecturer at the Technical University Darmstadt. In 2018, he found his startup Lithium Architects GmbH in Frankfurt, and since then has served as company’s CEO.
Textul de pe ultima copertă
This book discusses a new method for the design and engineering of complex façades. Based on the file-to-factory concept, the method combines parametric design approaches and additive manufacturing.
Parametric design and additive manufacturing are both growing trends that open up new possibilities. Parametric design approaches change how planners / designers perceive building details. Further, new engineering concepts are needed to cope with the increasing complexity of architectural geometries due to the rapid developments in areas such as façade systems, modeling software and digital manufacturing techniques.
The Content
• Introduction
• State of the Art
• Methods of manufacturing | AM of Metals
• Design Development
• Proof of Concept
• Li3-Method
• Summary and Outlook
The Author
Alamir Mohsen received his bachelor degree in Architecture in 2007. From 2007 to 2012, he worked as a technical architect and designer at various international companies in Cairo, Egypt, where he planned and designed several projects in the Middle East. From 2012 to 2014, he completed his master’s degree in Façade Engineering at the University of Applied Sciences in Detmold, Germany. From 2014 to 2018, he worked as a façade engineer at Bollinger und Grohman Ingenieure in Frankfurt, Germany. From 2014 to 2019, he was a research assistant and lecturer at the Technical University Darmstadt. In 2018, he found his startup Lithium Architects GmbH in Frankfurt, and since then has served as company’s CEO.
Parametric design and additive manufacturing are both growing trends that open up new possibilities. Parametric design approaches change how planners / designers perceive building details. Further, new engineering concepts are needed to cope with the increasing complexity of architectural geometries due to the rapid developments in areas such as façade systems, modeling software and digital manufacturing techniques.
The Content
• Introduction
• State of the Art
• Methods of manufacturing | AM of Metals
• Design Development
• Proof of Concept
• Li3-Method
• Summary and Outlook
The Author
Alamir Mohsen received his bachelor degree in Architecture in 2007. From 2007 to 2012, he worked as a technical architect and designer at various international companies in Cairo, Egypt, where he planned and designed several projects in the Middle East. From 2012 to 2014, he completed his master’s degree in Façade Engineering at the University of Applied Sciences in Detmold, Germany. From 2014 to 2018, he worked as a façade engineer at Bollinger und Grohman Ingenieure in Frankfurt, Germany. From 2014 to 2019, he was a research assistant and lecturer at the Technical University Darmstadt. In 2018, he found his startup Lithium Architects GmbH in Frankfurt, and since then has served as company’s CEO.
Caracteristici
A new method for the design and engineering of complex façades and their requirements needs to be explored and applied This method utilizes the file-to-manufactory concept, which explores the opportunities of parametric design approaches and additive manufacturing