Cantitate/Preț
Produs
Total produse
Vezi coșul
Dynamic Behavior of Materials, Volume 1: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics de Jamie Kimberley

Dynamic Behavior of Materials, Volume 1: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics: Conference Proceedings of the Society for Experimental Mechanics Series

Editat de Jamie Kimberley, Leslie Elise Lamberson, Steven Mates
en Limba Engleză Hardback – 28 oct 2018
Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering.  The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Synchrotron Applications/Advanced Dynamic Imaging
Quantitative Visualization of Dynamic Events
Novel Experimental Techniques
Dynamic Behavior of Geomaterials
Dynamic Failure & Fragmentation
Dynamic Response of Low Impedance Materials
Hybrid Experimental/Computational Studies
Shock and Blast Loading
Advances in Material Modeling
Industrial Applications
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 120695 lei  6-8 săpt.
  Springer International Publishing – 3 ian 2019 120695 lei  6-8 săpt.
Hardback (1) 107494 lei  38-45 zile
  Springer International Publishing – 28 oct 2018 107494 lei  38-45 zile

Din seria Conference Proceedings of the Society for Experimental Mechanics Series

Preț: 107494 lei

Preț vechi: 141439 lei
-24% Nou

Puncte Express: 1612
Preț estimativ în valută:
20578€ • 21422$ • 16941£

Carte tipărită la comandă

Livrare economică 27 ianuarie-03 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319950884
ISBN-10: 3319950886
Pagini: 325
Ilustrații: X, 367 p. 283 illus., 244 illus. in color.
Dimensiuni: 210 x 279 mm
Ediția:1st ed. 2019
Editura: Springer International Publishing
Colecția Springer
Seria Conference Proceedings of the Society for Experimental Mechanics Series

Locul publicării:Cham, Switzerland

Cuprins

​Chapter 1.Error Analysis for Shock Equation of State Measurements in Polymers using Manganin Gauges.- Chapter 2.Ballistic Impact Experiments and Quantitative Assessments of Mesoscale Damage Modes in a Single-layer Woven Composite.- Chapter 3.A Novel Approach for Plate Impact Experiments to Obtain Properties of Materials under Extreme Conditions.- Chapter 4.Effect of the Ratio of Charge Mass to Target Mass on Measured Impulse.- Chapter 5.Fracture and Failure Characterization of Transparent Acrylic based graft Interpenetrating Polymer Networks (graft-IPNs).- Chapter 6.Dynamic Crack Branching in Soda-lime Glass: An Optical Investigation using Digital Gradient Sensing.- Chapter 7.A Hybrid Experimental-Numerical Study of Crack Initiation and Growth in Transparent Bilayers Across a Weak Interface.- Chapter 8.Inelastic Behavior of Tungsten-Carbide in Pressure-Shear Shock Experiments beyond 20 GPa.- Chapter 9.Mechanical Response and Damage Evolution of  High-Strength Concrete under Triaxial Loading.- Chapter 10.Heterodyne Diffracted Beam Photonic Doppler Velocimeter (DPDV) for Pressure-Shear Shock Experiments.- Chapter 11.An Optimization Based Approach to Design a Complex Loading Pattern Using a Modified Split Hopkinson Pressure Bar.- Chapter 12.Development of “Dropkinson” Bar for Intermediate Strain-rate Testing.- Chapter 13.Radial Inertia Effect on Dynamic Compressive Response of Polymeric Foam Materials.- Chapter 14.Keynote: Examining Material Response using X-ray Phase Contrast Imaging (40-min).- Chapter 15.Historical Note: Machining, Strain Gages, and a Pulse-heated Kolsky Bar.- Chapter 16.Improved Richtmyer-Meshkov Instability Experiments for Very-High-Rate Strength & Application to Tantalum.- Chapter 17.Mechanical Characterization and Numerical Material Modeling of Polyurea.- Chapter 18.Full-Scale Testing and Numerical Modeling of Adhesively Bonded Hot Stamped Ultra-High Strength Steel Hat Sections.- Chapter 19.Mechanical Characterization of ZrO2 Rich Glass Ceramic.- Chapter 20.Microstructure Characterization of Electrodeposited Nickel Tested at High Strain Rates.- chapter 21.The Flow Stress of AM IN 625 Under Conditions of High Strain and Strain Rate.- Chapter 22.Proton Radiography of Reverse Ballistic Impacts.- Chapter 23.The Effect of ECAE on the Ballistic Response of AZ31.- Chapter 24.Development of an Interferometer and Schlieren-based Measurement Technique for Resolving Cavitation Pressure Fields.- Chapter 25.Quasi-static and Dynamic Poisson’s Ratio Evolution of Hyperelastic Foams.- Chapter 26.Revisit of Dynamic Brazilian Tests of Geomaterials.- Chapter 27.Interface Chemistry Dependent Mechanical Properties in Energetic Material using Nano-scale Impact Experiment.- Chapter 28.Optimization of an Image-based Experimental Setup for the Dynamic Behaviour Characterization of Materials.- chapter 29.High Strain Rate Response of Adhesively Bonded Fiber-Reinforced Composite Joints – A Computational Study to Guide Experimental Design.- Chapter 30.Pressure-Shear Plate Impact Experiments on Soda-Lime Glass at Pressures Beyond 20 GPa.- Chapter 31.Dynamic Mechanical Response of T800/F3900 Composite under Tensile and Compressive Loading.- Chapter 32.Experimental Investigation of Rate Sensitive Mechanical Response of Polyurea.- Chapter 33.Experimental Study on Dynamic Fracture Response of Al6063-T6 under High Rates of Loading.- Chapter 34.Ballistic and Material Tests and Simulations on Ultra-High Performance Concrete.- Chapter 35.Mechanical Behavior of Ta at Extreme Strain-rates.- Chapter 36.Constitutive Modeling of Polyamide Split Hopkinson Pressure Bars for the Design of a Pre-stretched Apparatus.- Chapter 37.Investigating the Mechanical and Thermal Relationship for Epoxy Blends.- Chapter 38.A Novel Auxetic Structure with Enhanced Impact Performances by Means Of Periodic Tessellation with Variable Poisson's Ratio.- Chapter 39.On the Response of Polymer Bonded Explosives at Different Impact Velocities.- Chapter 40.Meso-scale Dynamic Behavior of Cast Magnesium at High Strain Rate Loading.- Chapter 41.Energy Absorption Characteristics of Graded Foams Subjected to High Velocity Loading.- Chapter 42.Residual Structural Capacity of a High-Performance Concrete.- Chapter 43.Dynamic Mode II Fracture Response of PMMA Within an Aquatic Environment.- Chapter 44.An Image-Based Inertial Impact Test for the High Strain Rate Properties of Brittle Materials.- Chapter 45.An Image-Based Approach for Measuring Dynamic Fracture Toughness.- Chapter 46.The Effect of In-plane Properties on the Ballistic Response of Polyethylene Composites.- Chapter 47.Storage and Loss Moduli of Low-impedance Materials at kHz Frequencies.- Chapter 48.Effects of Pressure and Strain Rate on the Mechanical Behavior of Glassy Polymers.- Chapter 49.The Role of Texture on the Strain-Rate Sensitivity of Mg and Mg Alloy AZ31B.- Chapter 50.Shock Compaction of Al Powder Examined by X-Ray Phase Contrast Imaging.- Chapter 51.Compression Wave Profiles in Shock Loaded Polymer-metal Composites.- Chapter 52.High-Strain Rate Interlaminar Shear Testing of Fibre-Reinforced Composites Using an Image-Based Inertial Impact Test.- Chapter 53. Mechanical Behavior and Deformation Mechanisms of Mg in Shear Using In-Situ Synchrotron Radiation X-Ray Diffraction.- Chapter 54.Developing an Alternative to Roma Plastilina #1 as a Ballistic Backing Material for Body Armor Evaluation.- Chapter 55.IBI Test for High Strain Rate Tensile Testing of Adhesives.- Chapter 56.Modified Digital Gradient Sensors with Higher Measurement Sensitivity for Evaluating Stress Gradients in Transparent Solids.- Chapter 57.Quantitative Visualization of Sub-micron Deformations and Stresses at Sub-microsecond Intervals in Soda-lime Glass Plates.- Chapter 58.Microstructural Effects in the High Strain Rate Ring Fragmentation of Copper.- Chapter 59.Uncertainties in Low-Pressure Shock Experiments on Heterogeneous Materials.- Chapter 60.Effects of Liquid Viscosity on Wave Propagation Through Submerged Granular Media.- Chapter 61.Numerical Study of the Failure Mechanism of Ceramics during Low Velocity Impact Used In Protective Systems.- Chapter 62.Influence of High Strain Rate Transverse Compression on the Tensile Strength of Polyethylene Ballistic Single Fibers.- Chapter 63.The Utility of 3D Digital Image Correlation for Characterizing High-Rate Deformation.- Chapter 64.Characterization of Dynamic Deformation and Failure of Novel Light Weight Steel Alloy.- Chapter 65.Dynamic Fragmentation of MAX Phase Ti3SiC2 from Edge-On Impact Experiments.- Chapter 66.Application of High-speed DIC to Study Damage of Thin Membranes under Blast.