Cantitate/Preț
Produs

Embedded Microprocessor System Design using FPGAs

Autor Uwe Meyer-Baese
en Limba Engleză Paperback – 17 mar 2022
This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. It gives a great introduction to FPGA-based microprocessor system design using state-of-the-art boards, tools, and microprocessors from Altera/Intel® and Xilinx®. HDL-based designs (soft-core), parameterized cores (Nios II and MicroBlaze), and ARM Cortex-A9 design are discussed, compared and explored using many hand-on designs projects. Custom IP for HDMI coder, Floating-point operations, and FFT bit-swap are developed, implemented, tested and speed-up is measured.  Downloadable files include all design examples such as basic processor synthesizable code for Xilinx and Altera tools for PicoBlaze, MicroBlaze, Nios II and ARMv7 architectures in VHDL and Verilog code, as well as the custom IP projects.  Each Chapter has a substantial number of short quiz questions, exercises, and challenging projects.
  • Explains soft, parameterized, and hard core systems design tradeoffs;
  • Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step;
  • Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized;
  • Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system;
  • Describes Compiler-Compiler Tool development;
  • Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 45996 lei  6-8 săpt.
  Springer International Publishing – 17 mar 2022 45996 lei  6-8 săpt.
Hardback (1) 52814 lei  3-5 săpt. +3759 lei  7-13 zile
  Springer International Publishing – 16 mar 2021 52814 lei  3-5 săpt. +3759 lei  7-13 zile

Preț: 45996 lei

Nou

Puncte Express: 690

Preț estimativ în valută:
8806 9153$ 7301£

Carte tipărită la comandă

Livrare economică 08-22 februarie 25

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783030505356
ISBN-10: 3030505359
Pagini: 509
Ilustrații: XVI, 509 p. 210 illus., 152 illus. in color.
Dimensiuni: 155 x 235 x 30 mm
Greutate: 0.73 kg
Ediția:1st ed. 2021
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland

Cuprins

Embedded Microprocessor Systems Basics.- FPGA Devices, Boards, and Design Tools.- Microprocessor Component Design in VHDL.- Microprocessor Component Design in Verilog.- Microprocessor Programming in C/C++.- Software Tools for Embedded Microprocessors Systems.- Design of the  PicoBlaze Softcore Microprocessor.- Software tools for the PicoBlaze Softcore Microprocessor.- Altera/Intel Nios Embedded Microprocessor.- Xilinx MicroBlaze Embedded Microprocessor.- ARMv7 Cortex-A9 Embedded Microprocessor.

Notă biografică

Dr. Uwe Meyer-Baese received his BSEE, MSEE, and Ph.D. "Summa cum Laude" from the Darmstadt University of Technology in 1987, 1989, and 1995, respectively. He is now a Full Professor in the ECE Department at Florida State University. He holds 3 patents, has published over 130 journal and conference papers, 9 books, and supervised more than 60 master and Ph.D. thesis projects in the real-time DSP/FPGA area. In 2003, he was awarded the “Habilitation” (venia legendi) by the Darmstadt University of Technology. He is PI and CO-PI of projects valued more than 9 million USD. His research is funded by NIH, NSF, FSU, DOD, Harris, SUN microsystems, Altera, Xilinx and the State of Florida. He is author of the best-selling textbook on DSP with FPGAs by Springer Verlag sold over 20K copies. He received in 1997 the Max-Kade Award in Neuroengineering, the Outstanding Teaching Award from Florida State University in 2008, the Best Presentation Award from SPIE in 2006, Who’s Who in Science member in2005,  and the Humboldt Research Award in 2009.  Dr. Meyer-Baese has been promoted by the Institute of Electrical and Electronics Engineers (IEEE) to Senior Member status in 2013.


Textul de pe ultima copertă

This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. It gives a great introduction to FPGA-based microprocessor system design using state-of-the-art boards, tools, and microprocessors from Altera/Intel® and Xilinx®. HDL-based designs (soft-core), parameterized cores (Nios II and MicroBlaze), and ARM Cortex-A9 design are discussed, compared and explored using many hand-on designs projects. Custom IP for HDMI coder, Floating-point operations, and FFT bit-swap are developed, implemented, tested and speed-up is measured.  Downloadable files include all design examples such as basic processor synthesizable code for Xilinx and Altera tools for PicoBlaze, MicroBlaze, Nios II and ARMv7 architectures in VHDL and Verilog code, as well as the custom IP projects.  Each Chapter has a substantial number of short quiz questions, exercises, and challenging projects.

  • Explains soft, parameterized, and hard core systems design tradeoffs;
  • Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step;
  • Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized;
  • Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system;
  • Describes Compiler-Compiler Tool development;
  • Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter.

Caracteristici

Explains soft, parameterized, and hard core systems design tradeoffs Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system Describes Compiler-Compiler Tool development Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter