Fluid Mechanics and Heat Transfer: Inexpensive Demonstrations and Laboratory Exercises
Editat de William Roy Penney, Edgar C. Clausenen Limba Engleză Paperback – 12 feb 2018
Toate formatele și edițiile | Preț | Express |
---|---|---|
Paperback (1) | 526.76 lei 6-8 săpt. | |
CRC Press – 12 feb 2018 | 526.76 lei 6-8 săpt. | |
Hardback (1) | 1089.01 lei 6-8 săpt. | |
CRC Press – 20 feb 2018 | 1089.01 lei 6-8 săpt. |
Preț: 526.76 lei
Preț vechi: 619.72 lei
-15% Nou
Puncte Express: 790
Preț estimativ în valută:
100.84€ • 104.82$ • 83.61£
100.84€ • 104.82$ • 83.61£
Carte tipărită la comandă
Livrare economică 05-19 februarie 25
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9780815374312
ISBN-10: 0815374313
Pagini: 236
Ilustrații: 2 Illustrations, color; 81 Illustrations, black and white
Dimensiuni: 156 x 234 x 13 mm
Greutate: 0.39 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press
ISBN-10: 0815374313
Pagini: 236
Ilustrații: 2 Illustrations, color; 81 Illustrations, black and white
Dimensiuni: 156 x 234 x 13 mm
Greutate: 0.39 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press
Public țintă
Professional Practice & DevelopmentCuprins
Section I Fluid Mechanics Experiments and Demonstrations 1. Determining the Net Positive Suction Head of a Magnetic Drive Pump 2. Bernoulli Balance Experiments Using a Venturi 3. Force Produced by Impingement of a Fluid Jet on a Deflector 4. Applying the Bernoulli Balance to Determine Flow and Permanent Pressure Loss 5. A Simple Sharp-Edged Orifice Demonstration 6. Depressurization of an Air Tank 7. Draining an Upper Tank into a Lower Tank: Experimental and Modeling Studies 8. Determining the Pump Curve and the Efficiency for a Bomba BP-50 Regenerative Centrifugal Pump Section II Heat Transfer Experiments and Demonstrations 9. Thermal Conductivity and Radiative Experiments Measurement 10. Free Convection Heat Transfer from Plates 11. Forced Convection Heat Transfer by Air Flowing over the Top Surface of a Horizontal Plate 12. Laminar Forced Convection Inside a Coiled Copper Tube 13. An Experimental Testing of Turbulent Forced Convection Inside Tubes 14. Forced Convection through an Annulus 15. Experimental Investigation and Modeling Studies of the Transient Cooling of a Brass Rod Subjected to Forced Convection of Room Air 16. Solar Flux and Absorptivity Measurements 17. A Transient Experiment to Determine the Heat Transfer Characteristics of a 100 W Incandescent Light Bulb, Operating at 48 W 18. Experimental Determination of a Room Heat Transfer Coefficient by Transient Cooling of a Mercury-in-Glass Thermometer 19. Experimental Determination and Modeling of the Temperature Distribution Along a Hollow Fin
Notă biografică
William Roy Penney currently serves as Professor Emeritus of Chemical Engineering at the University of Arkansas. His research interests include fluid mixing and process design, and he has been instrumental in introducing hands-on concepts into the undergraduate classroom. Professor Penney is a registered professional engineer in the state of Arkansas.
Edgar C. Clausen currently serves as Professor and Associate Department Head in Chemical Engineering at the University of Arkansas. His research interests include bioprocess engineering, the production of energy and chemicals from biomass and waste, and enhancement of the K-12 educational experience. Professor Clausen is a registered professional engineer in the state of Arkansas.
Edgar C. Clausen currently serves as Professor and Associate Department Head in Chemical Engineering at the University of Arkansas. His research interests include bioprocess engineering, the production of energy and chemicals from biomass and waste, and enhancement of the K-12 educational experience. Professor Clausen is a registered professional engineer in the state of Arkansas.
Recenzii
"This book presents 19 hands-on experiments and demonstrations that can be easily replicated at your university. They are budget friendly experiments and many are inexpensive enough to be replicated for small group use in an active-learning session in a classroom. The instructions are clearly written so that you can successfully build and operate them. The author’s indications of the level of precision that you will get with the apparatus are very helpful in planning whether it is appropriate for your purpose. Tips on changes that you might wish to make are included. Best yet, the authors invite you to email them with your questions."
—Christi Patton Luks, Missouri University of Science and Technology, USA
—Christi Patton Luks, Missouri University of Science and Technology, USA
Descriere
This title is an ideal resource for chemical engineering, mechanical engineering, or engineering technology professors or instructors starting a new laboratory or in need of inexpensive demonstrations of selected heat transfer or fluids principles for the classroom.