Geotechnical Engineering for Mine Waste Storage Facilities
Autor Geoffrey E. Blighten Limba Engleză Paperback – 30 iun 2020
The level and content are suitable as a technical source and reference for practising engineers engaged both in the design and operational management of mine waste storage facilities and for senior undergraduate and postgraduate students. The thirteen chapters follow the sequence of the life cycle of a waste storage facility (characterization, site selection, geotechnical exploration, environmental aspects, testing and compaction) and also consider the use of mine waste as a construction material.
The text is liberally illustrated by both line drawings and photographs, and the theoretical passages are supported by typical test results, worked examples and carefully analysed case histories.
| Toate formatele și edițiile | Preț | Express |
|---|---|---|
| Paperback (1) | 310.65 lei 6-8 săpt. | |
| CRC Press – 30 iun 2020 | 310.65 lei 6-8 săpt. | |
| Hardback (1) | 1245.75 lei 6-8 săpt. | |
| CRC Press – 16 noi 2009 | 1245.75 lei 6-8 săpt. |
Preț: 310.65 lei
Preț vechi: 356.62 lei
-13% Nou
Puncte Express: 466
Preț estimativ în valută:
59.45€ • 62.52$ • 49.67£
59.45€ • 62.52$ • 49.67£
Carte tipărită la comandă
Livrare economică 09-23 ianuarie 25
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9780367577216
ISBN-10: 0367577216
Pagini: 654
Dimensiuni: 174 x 246 x 34 mm
Greutate: 0.45 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press
Locul publicării:Boca Raton, United States
ISBN-10: 0367577216
Pagini: 654
Dimensiuni: 174 x 246 x 34 mm
Greutate: 0.45 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press
Locul publicării:Boca Raton, United States
V-ar putea interesa
-
Preț: 334.67 lei -
-28%Preț: 435.67 lei604.41 lei -
Pyrite Oxidation and Its ControlV. P. Evangelou-26%Preț: 2231.28 lei3027.24 lei -
-26%Preț: 760.60 lei1027.86 lei -
Preț: 111.17 lei -
Prospecting and Developing a Small MineW. W. StaleyPreț: 111.17 lei -
The Sampling and Assay of the Precious MetalsErnest a. SmithPreț: 200.28 lei -
Placer Gold Recovery MethodsMichael SilvaPreț: 62.52 lei -
Geology and Ore Deposits of the Blewett Mining DistrictCharles E. WeaverPreț: 122.47 lei -
Prospector's Field-Book and GuideH. S. OsbornPreț: 137.53 lei -
Preț: 114.75 lei -
Gold Deposits in North CarolinaHerman J. BrysonPreț: 125.31 lei -
Gold Districts of WyomingW. Dan HauselPreț: 66.93 lei -
Ore Deposits of the Gilman District, Eagle County, ColoradoThomas S. LoveringPreț: 97.52 lei -
Geopeko - A Successful Australian Mineral ExplorerBrian WilliamsPreț: 286.08 lei -
-26%Preț: 1290.74 lei1746.31 lei -
Mining in the ArcticA.J. Keen-26%Preț: 1203.79 lei1630.99 lei -
-26%Preț: 1305.09 lei1754.79 lei -
Geotechnical Stability in Surface MiningRaj.K. Singhal-45%Preț: 1572.09 lei2841.76 lei -
Innovations in Mining Backfill TechnologyF.P. Hassani-77%Preț: 558.35 lei2464.49 lei
Public țintă
Professional Practice & DevelopmentCuprins
1. Waste Engineering 2. Site Selection 3. Geotechnical Exploration 4. Environmental and Engineering Characteristics 5. In Situ Shear Strength Testing 6. Coefficient of Permeability, Seepage Flow Nets, Drains and Linings, Geosynthetics, Geomembranes and GCL's 7. Compaction 8. Impounding Dykes 9. Water Control and Functional and Safety Monitoring 10. Water Balances 11. Failures 12. Surface Stability 13. The Use of Mine Waste for Backfilling of Mining Voids and as a Construction Material
Notă biografică
Geoffrey Blight completed his Bachelor’s and Master’s degrees in Civil Engineering at the University of the Witwatersrand, Johannesburg and his PhD at the Imperial College of Science and Technology in London. The early years of his career were spent at the South African National Building Research Institute, Pretoria, where he was engaged in research on design, operation and safety of mine waste storage facilities, including waste rock dumps and hydraulic fill tailings storage facilities. After the disastrous failure of a coal waste dump at Aberfan, U.K. in 1966, he was sent on a country-wide inspection tour of South African mines to make sure that no similarly threatening stability situations existed locally. Eleven years later, after the disastrous failure of a hydraulic fill tailings dam at Bafokeng, north of Johannesburg, he was asked by the mining industry to write a comprehensive guide to the design, operation and closure of mine waste storage facilities. This appeared in 1979 and has been revised and updated several times since.
Geoff Blight re-joined the Department of Civil Engineering at Witwatersrand University in 1969 and the results of his continuing research and consulting work on mine waste have been widely published since. The present book has been developed from the updated mining industry guide as well as a series of post graduate courses in mine waste management that have been presented for many years.
In addition to numerous technical papers published in refereed journals and conference proceedings, he is the editor and co-author of the book “Mechanics of Residual Soil” (Balkema, 1997) and author of “Assessing Loads on Silos and Other Bulk storage Structures” (Taylor and Francis 2006).
Geoff Blight re-joined the Department of Civil Engineering at Witwatersrand University in 1969 and the results of his continuing research and consulting work on mine waste have been widely published since. The present book has been developed from the updated mining industry guide as well as a series of post graduate courses in mine waste management that have been presented for many years.
In addition to numerous technical papers published in refereed journals and conference proceedings, he is the editor and co-author of the book “Mechanics of Residual Soil” (Balkema, 1997) and author of “Assessing Loads on Silos and Other Bulk storage Structures” (Taylor and Francis 2006).
Descriere
Illustrated with line drawings and photographs, this volume is a comprehensive treatment of the application of geotechnical engineering to site selection, site exploration, and the design, operation, and closure of mine waste storage facilities. The level and content are suitable for practicing engineers engaged in the design and operational man