Industrial Management- Control and Profit: A Technical Approach: Lecture Notes in Management and Industrial Engineering
Autor Gideon Halevien Limba Engleză Hardback – 11 iun 2014
The main objective of manufacturing management is to make profit. However, in traditional manufacturing systems none of the separate stages in the process support this objective. Management is not expert in any of these stages and therefore is dependent on specific experts at each stage and must follow their decisions. Each stage has its own first priority which is not profit and cost. This means that management does not have real control over these functional stages, nor over the process as a whole.
This book presents controlling tools for management in order to allow them to communicate better with the experts of the particular manufacturing stages to reach better results and higher profits. It is shown that most enterprises can improve their efficiency rate by between 25 and 60% by using the tools developed here.
Toate formatele și edițiile | Preț | Express |
---|---|---|
Paperback (1) | 733.08 lei 38-44 zile | |
Springer International Publishing – 3 sep 2016 | 733.08 lei 38-44 zile | |
Hardback (1) | 895.58 lei 3-5 săpt. | |
Springer International Publishing – 11 iun 2014 | 895.58 lei 3-5 săpt. |
Din seria Lecture Notes in Management and Industrial Engineering
- 15% Preț: 657.39 lei
- 18% Preț: 1227.52 lei
- 18% Preț: 1229.10 lei
- 18% Preț: 963.15 lei
- 18% Preț: 1117.82 lei
- 15% Preț: 640.06 lei
- 18% Preț: 1229.40 lei
- 18% Preț: 1378.41 lei
- 18% Preț: 1112.30 lei
- 24% Preț: 1054.16 lei
- 18% Preț: 1386.92 lei
- 18% Preț: 1221.07 lei
- 18% Preț: 1226.73 lei
- 18% Preț: 1000.87 lei
- 18% Preț: 1389.30 lei
- 15% Preț: 646.75 lei
- Preț: 368.24 lei
- 18% Preț: 1103.77 lei
- 24% Preț: 790.66 lei
- 18% Preț: 1119.24 lei
- 18% Preț: 1383.49 lei
- 24% Preț: 806.62 lei
- 20% Preț: 579.96 lei
- 18% Preț: 946.24 lei
- 18% Preț: 1233.69 lei
- 18% Preț: 1218.21 lei
- 24% Preț: 800.02 lei
- 18% Preț: 1389.78 lei
- 18% Preț: 950.21 lei
- 24% Preț: 1060.69 lei
- 20% Preț: 578.04 lei
- Preț: 429.44 lei
Preț: 895.58 lei
Preț vechi: 1092.17 lei
-18% Nou
Puncte Express: 1343
Preț estimativ în valută:
171.40€ • 177.42$ • 144.86£
171.40€ • 177.42$ • 144.86£
Carte disponibilă
Livrare economică 12-26 februarie
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9783319034690
ISBN-10: 3319034693
Pagini: 284
Ilustrații: X, 273 p. 107 illus.
Dimensiuni: 155 x 235 x 21 mm
Greutate: 0.58 kg
Ediția:2014
Editura: Springer International Publishing
Colecția Springer
Seria Lecture Notes in Management and Industrial Engineering
Locul publicării:Cham, Switzerland
ISBN-10: 3319034693
Pagini: 284
Ilustrații: X, 273 p. 107 illus.
Dimensiuni: 155 x 235 x 21 mm
Greutate: 0.58 kg
Ediția:2014
Editura: Springer International Publishing
Colecția Springer
Seria Lecture Notes in Management and Industrial Engineering
Locul publicării:Cham, Switzerland
Public țintă
Professional/practitionerCuprins
1 Introduction.- Part one: Management control engineering.- 2 Product design.- 3 Process planning.- 4 Lot size & Profit.- 5 Traditional production planning.- 6 Flexible production planning.- 7 Quality control SQC & SPC.- Part two: Engineering support management.- 8 Inventory and management control.- 9 Resource planning.- 10 Master production planning.- 11 Determine delivery date and cost.- 12 company level of performance.- Index.
Textul de pe ultima copertă
This volume presents controlling tools for management in order to be in a position to communicate with control engineers concerning technological decisions.
The main objective of manufacturing management is to make profit. However, in traditional manufacturing systems none of the separate stages in the process support this objective. Management is not expert in any of these stages, and therefore is dependent on specific experts at each stage and must follow their decisions. Each stage has its own first priority which is not profit and cost. This means that management does not have real control over these functional stages, nor over the process as a whole.
This book presents controlling tools for management in order to allow them to communicate better with the experts of the particular manufacturing stages to reach better results and higher profits. It is shown that most enterprises can improve their efficiency rate by between 25 and 60% by using the tools developed here.
The main objective of manufacturing management is to make profit. However, in traditional manufacturing systems none of the separate stages in the process support this objective. Management is not expert in any of these stages, and therefore is dependent on specific experts at each stage and must follow their decisions. Each stage has its own first priority which is not profit and cost. This means that management does not have real control over these functional stages, nor over the process as a whole.
This book presents controlling tools for management in order to allow them to communicate better with the experts of the particular manufacturing stages to reach better results and higher profits. It is shown that most enterprises can improve their efficiency rate by between 25 and 60% by using the tools developed here.
Caracteristici
Serves as a tool for management control Introduces the technology of management control Unique approach to topic not often treated Includes supplementary material: sn.pub/extras