Optimal Fractional-order Predictive PI Controllers: For Process Control Applications with Additional Filtering: Studies in Infrastructure and Control
Autor Arun Mozhi Devan Panneer Selvam, Fawnizu Azmadi Hussin, Rosdiazli Ibrahim, Kishore Bingi, Nagarajapandian M.en Limba Engleză Paperback – 3 noi 2023
In this book, five chapters are structured with a proper sequential flow of details to provide a better understanding for the readers. A general introduction to the controllers, filters and optimization techniques is presented in Chapter 1. Reviews of the PI controllers family and their modifications are shown in the initial part of Chapter 2, followed by the development of the proposed fractional-order predictive PI (FOPPI) controller with dead-time compensation ability. In the first part of chapter 3, a review of the PI based iterative learning controllers, modified structures of the ILC and their modifications are presented. Then, the design of the proposed hybrid iterative learning controller-based fractional-order predictive PI controller based on the current cyclic feedback structure is presented. Lastly, the results and discussion of the proposed controller on benchmark process models and the real-time experimentation of the pilot pressure process plant are given. Chapter 4 presents the development of the proposed filtering techniques and their performance comparison with the conventional methods. Chapter 5 proposes the improvement of the existing sine cosine algorithm (SCA) and arithmetic optimization algorithm (AOA) to form a novel arithmetic-trigonometric optimization algorithm (ATOA) to accelerate the rate of convergence in lesser iterations with mitigation towards getting caught in the same local position. The performance analysis of the optimization algorithm will be carried out on benchmark test functions and the real-time pressure process plant.
| Toate formatele și edițiile | Preț | Express |
|---|---|---|
| Paperback (1) | 672.00 lei 38-44 zile | |
| Springer Nature Singapore – 3 noi 2023 | 672.00 lei 38-44 zile | |
| Hardback (1) | 767.66 lei 22-36 zile | |
| Springer Nature Singapore – 2 noi 2022 | 767.66 lei 22-36 zile |
Preț: 672.00 lei
Preț vechi: 884.22 lei
-24% Nou
Puncte Express: 1008
Preț estimativ în valută:
128.60€ • 133.98$ • 106.93£
128.60€ • 133.98$ • 106.93£
Carte tipărită la comandă
Livrare economică 05-11 februarie 25
Preluare comenzi: 021 569.72.76
Specificații
ISBN-13: 9789811965197
ISBN-10: 9811965196
Pagini: 146
Ilustrații: XVIII, 146 p. 63 illus., 57 illus. in color.
Dimensiuni: 155 x 235 mm
Ediția:1st ed. 2022
Editura: Springer Nature Singapore
Colecția Springer
Seria Studies in Infrastructure and Control
Locul publicării:Singapore, Singapore
ISBN-10: 9811965196
Pagini: 146
Ilustrații: XVIII, 146 p. 63 illus., 57 illus. in color.
Dimensiuni: 155 x 235 mm
Ediția:1st ed. 2022
Editura: Springer Nature Singapore
Colecția Springer
Seria Studies in Infrastructure and Control
Locul publicării:Singapore, Singapore
Cuprins
Introduction.- Fractional-order Predictive PI Controller for Dead-time Process Plants.- Hybrid Iterative Learning Controller Based Fractional-order Predictive PI Controller.- Development of Proposed Fractional-order Filtering Techniques.- Development of the Proposed Arithmetic-Trigonometric Optimization Algorithm.- Appendix.
Notă biografică
P. ARUN MOZHI DEVAN received the B.Eng. degree (Hons.) in electronics and instrumentation engineering from the Muthayammal Engineering College, Rasipuram, Tamil Nadu, India, in 2012, and the M.Eng. degree (Hons.) in Control and Instrumentation Engineering from Sri Ramakrishna Engineering College, Coimbatore, Tamil Nadu, India, in 2016. He is currently pursuing the Ph.D. degree with the Electrical and Electronic Engineering Department, Universiti Teknologi PETRONAS, Perak, Malaysia. He was with Sri Ramakrishna Engineering College as an Assistant Professor (O.G) in the Department of Electronics and Instrumentation Engineering from 2016 to 2018. His current research interests include Fractional-order Control, wireless networked control systems, process control and optimization.
FAWNIZU AZMADI HUSSIN received the bachelor’s degree in Electrical engineering from the University of Minnesota, Twin Cities, Minneapolis, MN, USA, in 1999, the M.Eng. Sc. degree in Systems and Control from the University of New South Wales, Sydney, NSW, Australia, in 2001, and the Ph.D. degree in core based testing of system-on-a-chip (SoCs) from the Nara Institute of Science and Technology, Ikoma, Japan, in 2008, under the scholarship from the Japanese Government (Monbukagakusho). He is currently an Associate Professor in Electrical and Electronics Engineering at Universiti Teknologi PETRONAS, He was the Program Manager of Master by coursework program (2009-2013), the Deputy Head of Electrical & Electronic Engineering department (2013-2014) and the Director of Strategic Alliance Office (2014-2018) at UTP. He spent one year as a Visiting Professor at Intel Microelectronics (Malaysia)’s SOC DFx department in 2012-13. He is actively involved with the IEEE Malaysia Section as volunteers since 2009. He was the 2013 & 2014 Chair of the IEEE Circuits and Systems Society Malaysia Chapter and currently serving as the Chair of IEEE Malaysia Section (2019 & 2020)
ROSDIAZLI IBRAHIM received the B.Eng. degree (Hons.) in Electrical Engineering from Universiti Putra Malaysia, Kembangan, Malaysia, in 1996, the M.Sc. degree (Hons.) in Automation and Control from Newcastle University, Newcastle upon Tyne, U.K., in 2000, and the Ph.D. degree in Electrical and Electronic Engineering from the University of Glasgow, U.K., in 2008. He is currently an Associate Professor with the Department of Electrical and Electronics Engineering, Universiti Teknologi Petronas (UTP), Seri Iskandar, Perak, Malaysia. He is currently the Dean with the Centre of Graduate Studies at UTP. His current research interests include intelligent control and non-linear multi-variable process modelling for control application. He is a Registered Engineer with the Board of Engineering Malaysia.
KISHORE BINGI received the B.Tech. degree in Electrical and Electronics Engineering from Bapatla Engineering College, Andhra Pradesh, India, in 2012, the M.Tech.degree in Instrumentation and Control Systems from National Institute of Technology (NIT) Calicut, Kerala, India, in 2014, and the Ph.D. degree in the Department of Electrical and Electronics Engineering, Universiti Teknologi PETRONAS (UTP), Perak, Malaysia in 2019. He worked as a Research Scientist and Post-doctoral researcher in the Institute of Autonomous Systems, Universiti Teknologi PETRONAS, Perak, Malaysia from 2019 to 2020. He also worked with TATA Consultancy Service (TCS) as an Assistant Systems Engineer from 2014 to 2015. He is currently an Assistant Professor (Senior Grade) in the Department of Control & Automation, School of Electrical Engineering (SELECT), Vellore Institute of Technology, Vellore, India. His current research interests include Non-linear Process Modeling, Fractional-order Control and Optimization.
M. NAGARAJAPANDIAN received his B.Eng. degree (Hons.) in Electronics and Instrumentation Engineering from Arunai Engineering College, Tiruvannamalai in 2010, and M.Eng. degree (Hons.) degree in Applied Electronics from Shri Andal Alagar College of Engineering, in 2012. He is currently an Assistant Professor in the Department of Electronics and Instrumentation Engineering, Sri Ramakrishna Engineering College, Coimbatore. He has ten years of experience as an Assistant Professor. Also, he is currently pursuing the Ph.D. degree with the Electrical and Electronic Engineering Department, PSG College of Technology, Coimbatore, Tamil Nadu, India. His areas of research interest are Control Systems, Non-linear control and Process Control Optimization.
FAWNIZU AZMADI HUSSIN received the bachelor’s degree in Electrical engineering from the University of Minnesota, Twin Cities, Minneapolis, MN, USA, in 1999, the M.Eng. Sc. degree in Systems and Control from the University of New South Wales, Sydney, NSW, Australia, in 2001, and the Ph.D. degree in core based testing of system-on-a-chip (SoCs) from the Nara Institute of Science and Technology, Ikoma, Japan, in 2008, under the scholarship from the Japanese Government (Monbukagakusho). He is currently an Associate Professor in Electrical and Electronics Engineering at Universiti Teknologi PETRONAS, He was the Program Manager of Master by coursework program (2009-2013), the Deputy Head of Electrical & Electronic Engineering department (2013-2014) and the Director of Strategic Alliance Office (2014-2018) at UTP. He spent one year as a Visiting Professor at Intel Microelectronics (Malaysia)’s SOC DFx department in 2012-13. He is actively involved with the IEEE Malaysia Section as volunteers since 2009. He was the 2013 & 2014 Chair of the IEEE Circuits and Systems Society Malaysia Chapter and currently serving as the Chair of IEEE Malaysia Section (2019 & 2020)
ROSDIAZLI IBRAHIM received the B.Eng. degree (Hons.) in Electrical Engineering from Universiti Putra Malaysia, Kembangan, Malaysia, in 1996, the M.Sc. degree (Hons.) in Automation and Control from Newcastle University, Newcastle upon Tyne, U.K., in 2000, and the Ph.D. degree in Electrical and Electronic Engineering from the University of Glasgow, U.K., in 2008. He is currently an Associate Professor with the Department of Electrical and Electronics Engineering, Universiti Teknologi Petronas (UTP), Seri Iskandar, Perak, Malaysia. He is currently the Dean with the Centre of Graduate Studies at UTP. His current research interests include intelligent control and non-linear multi-variable process modelling for control application. He is a Registered Engineer with the Board of Engineering Malaysia.
KISHORE BINGI received the B.Tech. degree in Electrical and Electronics Engineering from Bapatla Engineering College, Andhra Pradesh, India, in 2012, the M.Tech.degree in Instrumentation and Control Systems from National Institute of Technology (NIT) Calicut, Kerala, India, in 2014, and the Ph.D. degree in the Department of Electrical and Electronics Engineering, Universiti Teknologi PETRONAS (UTP), Perak, Malaysia in 2019. He worked as a Research Scientist and Post-doctoral researcher in the Institute of Autonomous Systems, Universiti Teknologi PETRONAS, Perak, Malaysia from 2019 to 2020. He also worked with TATA Consultancy Service (TCS) as an Assistant Systems Engineer from 2014 to 2015. He is currently an Assistant Professor (Senior Grade) in the Department of Control & Automation, School of Electrical Engineering (SELECT), Vellore Institute of Technology, Vellore, India. His current research interests include Non-linear Process Modeling, Fractional-order Control and Optimization.
M. NAGARAJAPANDIAN received his B.Eng. degree (Hons.) in Electronics and Instrumentation Engineering from Arunai Engineering College, Tiruvannamalai in 2010, and M.Eng. degree (Hons.) degree in Applied Electronics from Shri Andal Alagar College of Engineering, in 2012. He is currently an Assistant Professor in the Department of Electronics and Instrumentation Engineering, Sri Ramakrishna Engineering College, Coimbatore. He has ten years of experience as an Assistant Professor. Also, he is currently pursuing the Ph.D. degree with the Electrical and Electronic Engineering Department, PSG College of Technology, Coimbatore, Tamil Nadu, India. His areas of research interest are Control Systems, Non-linear control and Process Control Optimization.
Textul de pe ultima copertă
This book presents the study to design, develop, and implement improved PI control techniques using dead-time compensation, structure enhancements, learning functions and fractional ordering parameters. Two fractional-order PI controllers are proposed and designed: fractional-order predictive PI and hybrid iterative learning based fractional-order predictive PI controller. Furthermore, the proposed fractional-order control strategies and filters are simulated over first- and second-order benchmark process models and further validated using the real-time experimentation of the pilot pressure process plant.
In this book, five chapters are structured with a proper sequential flow of details to provide a better understanding for the readers. A general introduction to the controllers, filters and optimization techniques is presented in Chapter 1. Reviews of the PI controllers family and their modifications are shown in the initial part of Chapter 2, followed by the development of the proposed fractional-order predictive PI (FOPPI) controller with dead-time compensation ability. In the first part of chapter 3, a review of the PI based iterative learning controllers, modified structures of the ILC and their modifications are presented. Then, the design of the proposed hybrid iterative learning controller-based fractional-order predictive PI controller based on the current cyclic feedback structure is presented. Lastly, the results and discussion of the proposed controller on benchmark process models and the real-time experimentation of the pilot pressure process plant are given. Chapter 4 presents the development of the proposed filtering techniques and their performance comparison with the conventional methods. Chapter 5 proposes the improvement of the existing sine cosine algorithm (SCA) and arithmetic optimization algorithm (AOA) to form a novel arithmetic-trigonometric optimization algorithm (ATOA) to accelerate the rate of convergence in lesser iterations with mitigation towards getting caught in the same local position. The performance analysis of the optimization algorithm will be carried out on benchmark test functions and the real-time pressure process plant.
In this book, five chapters are structured with a proper sequential flow of details to provide a better understanding for the readers. A general introduction to the controllers, filters and optimization techniques is presented in Chapter 1. Reviews of the PI controllers family and their modifications are shown in the initial part of Chapter 2, followed by the development of the proposed fractional-order predictive PI (FOPPI) controller with dead-time compensation ability. In the first part of chapter 3, a review of the PI based iterative learning controllers, modified structures of the ILC and their modifications are presented. Then, the design of the proposed hybrid iterative learning controller-based fractional-order predictive PI controller based on the current cyclic feedback structure is presented. Lastly, the results and discussion of the proposed controller on benchmark process models and the real-time experimentation of the pilot pressure process plant are given. Chapter 4 presents the development of the proposed filtering techniques and their performance comparison with the conventional methods. Chapter 5 proposes the improvement of the existing sine cosine algorithm (SCA) and arithmetic optimization algorithm (AOA) to form a novel arithmetic-trigonometric optimization algorithm (ATOA) to accelerate the rate of convergence in lesser iterations with mitigation towards getting caught in the same local position. The performance analysis of the optimization algorithm will be carried out on benchmark test functions and the real-time pressure process plant.
Caracteristici
Presents comparison between optimal fractional-order predictive PI controllers and well known PI controllers Discusses new metaheuristic techniques Serves as a reference resource for researchers and practitioners in academia and industry