Cantitate/Preț
Produs
Total produse
Vezi coșul
Plasticity, Damage and Fracture in Advanced Materials de Holm Altenbach

Plasticity, Damage and Fracture in Advanced Materials: Advanced Structured Materials, cartea 121

Editat de Holm Altenbach, Michael Brünig, Zbigniew L. Kowalewski
en Limba Engleză Paperback – 6 dec 2020
This book presents studies on the plasticity, failure, and damage behavior of materials and structures under monotonic and cyclic loads. Featuring contributions by leading authors from around the globe, it focuses on the description of new effects observed in experiments, such as damage under cyclic loading. It also proposes various simulation models based on different approaches and compares them with tests, taking scaling aspects into account.




Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 62439 lei  6-8 săpt.
  Springer International Publishing – 6 dec 2020 62439 lei  6-8 săpt.
Hardback (1) 63046 lei  6-8 săpt.
  Springer International Publishing – 6 dec 2019 63046 lei  6-8 săpt.

Din seria Advanced Structured Materials

Preț: 62439 lei

Preț vechi: 73458 lei
-15% Nou

Puncte Express: 937
Preț estimativ în valută:
11951€ • 12532$ • 9875£

Carte tipărită la comandă

Livrare economică 29 ianuarie-12 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783030348533
ISBN-10: 3030348539
Pagini: 213
Ilustrații: XVII, 213 p. 144 illus., 114 illus. in color.
Dimensiuni: 155 x 235 mm
Greutate: 0.33 kg
Ediția:1st ed. 2020
Editura: Springer International Publishing
Colecția Springer
Seria Advanced Structured Materials

Locul publicării:Cham, Switzerland

Cuprins

1 Continuum Modelling of the Anisotropic Elastic-Plastic In-Plane Behavior of Paperin Small and Large Strains Regime.- 2 Experiments on Damage and Fracture Mechanisms in Ductile Metals under Non-proportional Loading Paths.- 3 Strength Differential Effect in Martensitic Stainless Steel Under Quenching and Partitioning Heat Treatment Conditio.- 4 Deformation Twinningin bcc Iron-Experimental Investigation of Twin Formation Assisted by Molecular Dynamics Simulation.

Notă biografică

 Prof. Dr.-Ing. habil. Dr. h.c. mult. Holm Altenbach is a member of the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy, and International Association of Applied Mathematics and Mechanics (GAMM). In 1996, he was appointed as a Full Professor (Engineering Mechanics) at the Martin Luther University Halle-Wittenberg, and since 2011, he has been a Full Professor at the Otto-von-Guericke-University Magdeburg. He graduated from Leningrad Polytechnic Institute in 1980 (diploma with a distinction), and defended his Ph.D. and obtained his postgraduate degree (habilitation) from the same university in 1983 and 1987, respectively.
His areas of scientific interest include:
-          Theory of plates and shells with applications
-          Continuum mechanics and material modeling
-          Generalized media
-          Sandwiches and laminates
He is an Editor-in-Chief of the Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik (the oldest journal in mechanics in Germany) and of Springer’s Advanced Structured Materials series. He is a member of the editorial board of the following journals: Continuum Mechanics and Thermodynamics, Technische Mechanik, Mechanics of Composite Materials, and Journal of Strain Analysis for Engineering Design. He was awarded the Polish Humboldt Prize in 2018.
 
Prof. Dr.-Ing. habil. Michael Brünig is a member of the International Association of Applied Mathematics and Mechanics (GAMM) and the German Association of Computational Mechanics (GACM). In 2010, he was appointed as a Full Professor at the Bundeswehr University Munich. He graduated from the University of Hannover in 1985, defended his doctoral degree at Ruhr-University Bochum in 1989, and obtained his postgraduate degree (habilitation) from the University of Technology Dortmund in 1988.
His areas of scientific interest include:
-          Continuum mechanics and material modeling
-          Finite element analysis -          Experiments on damage and fracture behavior
He is a member of the editorial board of the following journals: International Journal of Plasticity, International Journal of Damage Mechanics, Latin American Journal of Solids and Structures, Open Mechanics Journal, Open Mechanical Engineering Journal, Recent Patents on Mechanical Engineering (Regional Editor), ISRN Applied Mathematics, Chinese Journal of Engineering.  
Prof. Dr.-Ing. habil. Zbigniew Kowalewski graduated from the Faculty of Mechanics, Warsaw University of Technology (1981). He received his Ph.D. and postgraduate degree (habilitation) from the Institute of Fundamental Technological Research of the Polish Academy of Sciences in 1988 and 1997, respectively. In 2008, Professor Zbigniew Kowalewski was nominated as a Full Professor of Mechanical Engineering by the President of Poland. He was the British Council Fellow at the University of Manchester from 1992 to 1993. Professor Zbigniew Kowalewski was appointed to the Institute of Fundamental Technological Research of the Polish Academy of Sciences in 1985 and worked at Warsaw University of Technology from 1997 to 2010. From 2010 to 2011, he was a Deputy Director of the Institute of Fundamental Technological Research. Since 2011, he has been the Head of the Department of Experimental Mechanics at the Institute of Fundamental Technological Research. From 2015, he has been the President of the Polish Society of Theoretical and Applied Mechanics and from 2016 vice-president of the EuraSEM. Hehas over 35 years of research experience, mainly in the areas of plasticity, creep, fatigue, experimental methods in solid mechanics, and modeling of creep constitutive equations. He is a member of the editorial board of the following journals: Journal of Theoretical and Applied Mechanics, Engineering Transactions, Archives of Mechanical Engineering, and International Journal of Lightweight Materials.

Textul de pe ultima copertă

This book presents studies on the plasticity, failure, and damage behavior of materials and structures under monotonic and cyclic loads. Featuring contributions by leading authors from around the globe, it focuses on the description of new effects observed in experiments, such as damage under cyclic loading. It also proposes various simulation models based on different approaches and compares them with tests, taking scaling aspects into account.

Caracteristici

Presents the properties of composite materials Lists modeling approaches Includes chapter on chemomechanics in the context of plasticity and fracture