Cantitate/Preț
Produs
Total produse
Vezi coșul
Power Plant Instrumentation and Control Handbook: A Guide to Thermal Power Plants de Swapan Basu

Power Plant Instrumentation and Control Handbook: A Guide to Thermal Power Plants

Autor Swapan Basu, Ajay Kumar Debnath
en Limba Engleză Hardback – 8 iun 2019
Power Plant Instrumentation and Control Handbook, Second Edition, provides a contemporary resource on the practical monitoring of power plant operation, with a focus on efficiency, reliability, accuracy, cost and safety. It includes comprehensive listings of operating values and ranges of parameters for temperature, pressure, flow and levels of both conventional thermal power plant and combined/cogen plants, supercritical plants and once-through boilers. It is updated to include tables, charts and figures from advanced plants in operation or pilot stage. Practicing engineers, freshers, advanced students and researchers will benefit from discussions on advanced instrumentation with specific reference to thermal power generation and operations.
New topics in this updated edition include plant safety lifecycles and safety integrity levels, advanced ultra-supercritical plants with advanced firing systems and associated auxiliaries, integrated gasification combined cycle (IGCC) and integrated gasification fuel cells (IGFC), advanced control systems, and safety lifecycle and safety integrated systems.


  • Covers systems in use in a wide range of power plants: conventional thermal power plants, combined/cogen plants, supercritical plants, and once through boilers
  • Presents practical design aspects and current trends in instrumentation
  • Discusses why and how to change control strategies when systems are updated/changed
  • Provides instrumentation selection techniques based on operating parameters. Spec sheets are included for each type of instrument
  • Consistent with current professional practice in North America, Europe, and India
  • All-new coverage of Plant safety lifecycles and Safety Integrity Levels
  • Discusses control and instrumentation systems deployed for the next generation of A-USC and IGCC plants
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 97606 lei  5-7 săpt.
  ELSEVIER SCIENCE – 4 noi 2014 97606 lei  5-7 săpt.
Hardback (1) 117363 lei  5-7 săpt.
  ELSEVIER SCIENCE – 8 iun 2019 117363 lei  5-7 săpt.

Preț: 117363 lei

Preț vechi: 161494 lei
-27% Nou

Puncte Express: 1760
Preț estimativ în valută:
22460€ • 23171$ • 19009£

Carte tipărită la comandă

Livrare economică 26 februarie-12 martie

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9780128195048
ISBN-10: 0128195045
Pagini: 1152
Ilustrații: Approx. 150 illustrations
Dimensiuni: 216 x 276 mm
Greutate: 2.92 kg
Ediția:2
Editura: ELSEVIER SCIENCE

Public țintă

Power Engineers, Control Engineers, Instrumentation and Control Technicians in power plants

Cuprins

I. Introduction
1. Introduction; 2. Fundamental Knowledge about Basic Process; 3. Process Parameters and Ranges
II. Main Equipment
1. Overview of Types, Functions, and Description of Main Equipment; 2. Steam Generator: Boiler; 3. Turbine Types; 4. Generator; 5. Boiler Feed Pump and Condensate Extraction Pump with Associated Measurements; 6. Deaerators and Heaters; 7. Function and Description of CW and ACW Systems; 8. Demineralizing Plant’s Function and Description; 9. Basic System Functions and Description of Coal Handling; 10. Basic System Functions and Description of ASH Handling
III. Plant P&ID Discussions
1. Introduction (P&ID); 2. Main Steam (P&ID); 3. Reheat Steam (P&IDs): Cold and Hot Reheat; 4. Extraction Steam (P&IDs): Bleed Steam; 5. Auxiliary Steam (P&IDs); 6. Feed Water System (P&ID); 7. Condensate System (P&IDs); 8. Heater Drain and Vent (P&IDs); 9. Air and Flue Gas System (P&IDs); 10. Cogeneration P&ID; 11. Miscellaneous Other Systems (P&ID)
IV. General Instruments
1. Introduction; 2. Pressure Measurement: Various Measuring Points and Range Selection; 3. Temperature Measurement: Various Measuring Points and Range Selection; 4. Flow Measurement, Various Measuring Points, Various Types, and Range Selection; 5. Level Measurement
V. Special Instrument
1. Special Instruments; 2. Vibration and Turbovisory Instruments; 3. Gas Analyzers; 4. Steam and Water Analysis System; 5. Sample Conditioning System; 6. Blow Down and Dosing Control; 7. Analyzers for Air Pollution Monitoring and Control (NOX Control)
VI. Final Control Element
1. Valves and Actuators; 2. Control Valve Types; 3. Dampers and Miscellaneous other FCEs; 4. Actuators; 5. Accessories
VII. Intelligent Control System
1. Basics (Discussion on Intelligent Network System); 2. PLC System: Introduction; 3. Annunciation and Sequence of Events: Preamble; 4. Integrated DCS–DDC MIS: Preamble; 5. MMI and Recording: Introduction; 6. MIS: Introduction
VIII. Boiler Control System
1. Basic Control Requirements; 2. Steam Pressure Control with Load Index; 3. Air Flow Control; 4. Fuel Flow Control; 5. Coal Mill Control—Mill Air Flow for TT Boiler; 6. Furnace Draft Control; 7. Drum-Level and Feedwater Controls; 8. Superheater Temperature Control; 9. Reheat Temperature Control; 10. Miscellaneous Boiler Controls, including Overfire Air Dampers; 11. HP–LP Bypass System; 12. Boiler OLCS: Introduction to Interlock and Protection of Boiler BMS, SADC, and SB Control
IX. Turbo Generator Control System
1. Introduction; 2. Electro Hydraulic Governor Control System; 3. Turbine Protection System; 4. ATRS; 5. ATT System; 6. Thermal Stress Evaluator; 7. LPBP System; 8. Turbine Controls: Seal Steam Pressure Control System; 9. Hydrogen Seal Oil System and Differential Pressure Control; 10. Generator Control System; 11. Condenser Level and Deaerator Level Control System; 12. Various TG Options and Miscellaneous TG Controls
X. Coordinated Control System
1. Introduction; 2. Coordinate Control Mode; 3. Turbine Follow Mode; 4. Boiler Follow Mode; 5. Run Back System; 6. Discussions and Explanations
XI. Balance of Plant Control System
1. Balance of Plant: Introduction; 2. BFP Recirculation Control; 3. CEP Recirculation Control; 4. GSC Minimum Flow Control; 5. Deaerator (Pressure) Control; 6. LP Heater Level Control; 7. HP Heater Level Control; 8. Ejector Control and TAS
XII. Installation Practices
1. Introduction; 2. Pipe Valve Fitting Material Specification and Rating; 3. Mechanical Installation of Instruments; 4. Electrical Installation of Instruments
XIII: Advanced Ultra-Supercritical Thermal Power Plant and Associated Auxiliaries
XIV: Plant safety life cycle and Safety Integrated level
Appendix
I. Process and Mechanical Standard Table; II. Electrical Data and Tables; III. ISA Standard, Materials, Human Engineering, and Control Room; IV. Network Control and Communication; V. Super/Ultra Super Critical Power Plants; VI. Integrated Gasifier and Combined Cycle Plant (Pollution Control); VII. A Few Operational Features of the Unit