Cantitate/Preț
Produs
Total produse
Vezi coșul
Proceedings of the 4th International Symposium on Materials and Sustainable Development: Volume 2: Waste Recycling and Environment de Brahim Safi

Proceedings of the 4th International Symposium on Materials and Sustainable Development: Volume 2: Waste Recycling and Environment

Editat de Brahim Safi, Abdelhakim Daoui, Hamza Mechakra, Youcef Ghernouti
en Limba Engleză Hardback – 15 oct 2020
This book presents the proceedings of the 4th International Symposium on Materials and Sustainable Development ISMSD2019 (CIMDD2019), will include a 3-day Conference (12 - 14 November). Organized by the Research Unit: Materials, Processes and Environment and M'hamed Bougara University  of Boumerdes (Algeria) in partnership with University of Reims - Champagne-Ardenne (France), this symposium follows the success of CIMDD 2013-2015-2017 and continues the traditions of the highly successful series of International Conferences on the materials, processes and Environment. The Symposium will provide a unique topical forum to share the latest results of the materials and sustainable development research in Algeria and worldwide.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 118825 lei  6-8 săpt.
  Springer International Publishing – 15 oct 2021 118825 lei  6-8 săpt.
Hardback (1) 119411 lei  6-8 săpt.
  Springer International Publishing – 15 oct 2020 119411 lei  6-8 săpt.

Preț: 119411 lei

Preț vechi: 145623 lei
-18% Nou

Puncte Express: 1791
Preț estimativ în valută:
22855€ • 23977$ • 18959£

Carte tipărită la comandă

Livrare economică 29 ianuarie-12 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783030432102
ISBN-10: 3030432106
Ilustrații: XII, 198 p. 128 illus., 60 illus. in color.
Dimensiuni: 155 x 235 mm
Greutate: 0.48 kg
Ediția:1st ed. 2020
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland

Cuprins

  1. Numerical simulation of cds-free cigs solar cells
  2. Treatment of hassi r'mel oil discharge by an agro-food-waste
  3. Cattle manure characterization for the optimization of biogas production and its energetic valorization in an agricultural exploitation
  4. Influence of treatment of date palm fibers on the mechanical properties of fiber concrete
  5. Analyses of the micromechanics of stress transfer in single fiber pull-out tests
  6. Effect of reinforcement shear and buckles defects on the low velocity impact behavior of a composite
  7. Biosurfactants production from newly isolated aspergillus sp. Fs11 using agro-industrial wastes.
  8. Sustainable management of renewable energy potential in the naã‚ma region
  9. Physical and mechanical properties of concrete containing pvc waste as aggregate
  10. Impact of the nature of fibers on the physico-mechanical behavior and durability of cement matrices
  11. Statistical analysis of the tensile properties of fiber strand and vascular bundle extracted from date palm rachis
  12. Modeling and simulation of conductance–voltage characteristics of a nitride gaas schottky diode
  13. Compliance with rpa of an old building
  14. Elimination of malachite green on granular activated carbon prepared from olive stones in discontinuous and continuous modes
  15. Influences de la propagation d'une fissure sur les frã©quences modales des aubes de la turbine
  16. Behavior of concrete using coal waste (heap) in hot weather
  17. Cosotia project: decision support for the choice of concentrated solar technologies for electricity generation
  18. Study of physico-mechanical characteristics of concrete made with recycled gravel and prepared sand
  19. Effect of initial suction on the hydraulic conductivity of an algerian waste landfill lining
  20. Influence of thermally dilated graphite on the differential calorimetric of the fluoroplastique
  21. Study of the mechanical properties of a reactive powder concrete containing fibers
  22. Use of the stochastic finite element method for linear elasticity problems
  23. Statistical analysis of the tensile properties of fiber strand and vascular bundle extracted from date palm rachis
  24. Study of the mechanical strength of a composite carbon/perlon/epoxy used in the manufacture of orthopedic prosthesis.
  25. Effect of different anodizing bath on improving the corrosion resistance of a 2024 aluminum alloy
  26. Influence of leachate pollution on hydromechanical properties of sandy soils-bentonite mixture
  27. A review of phase change materials used to improve thermal comfort in buildings
  28. Effect of water and temperature on the rheological behavior of crude oil
  29. Metal-organic framworks (mofs): advanced technology of architechitectural instability against moisture
  30. Physicochemical and foaming properties of crude acid whey treated by ultrafiltration
  31. The mechanical proprieties study of ti-n on machines steel substrates
  32. Maintenance of 3d printer for material optimization

Textul de pe ultima copertă

This book presents the proceedings of the 4th International Symposium on Materials and Sustainable Development ISMSD2019 (CIMDD2019), will include a 3-day Conference (12 - 14 November). Organized by the Research Unit: Materials, Processes and Environment and M'hamed Bougara University  of Boumerdes (Algeria) in partnership with University of Reims - Champagne-Ardenne (France), this symposium follows the success of CIMDD 2013-2015-2017 and continues the traditions of the highly successful series of International Conferences on the materials, processes and Environment. The Symposium will provide a unique topical forum to share the latest results of the materials and sustainable development research in Algeria and worldwide.

Caracteristici

Presents papers from ISMSD2019
Topics ranging from materials, to processes and environment
Endorsed by M'hamed Bougara University of Boumerdes (Algeria) and University of Reims Champagne—Ardenne (France)