Cantitate/Preț
Produs
Total produse
Vezi coșul
Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 de Bernd-Arno Behrens

Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021: Lecture Notes in Production Engineering

Editat de Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis
en Limba Engleză Hardback – 5 sep 2021
This congress proceedings provides recent research on leading-edge manufacturing processes. The aim of this scientific congress is to work out diverse individual solutions of "production at the leading edge of technology" and transferable methodological approaches. In addition, guest speakers with different backgrounds will give the congress participants food for thoughts, interpretations, views and suggestions.
The manufacturing industry is currently undergoing a profound structural change, which on the one hand produces innovative solutions through the use of high-performance communication and information technology, and on the other hand is driven by new requirements for goods, especially in the mobility and energy sector. With the social discourse on how we should live and act primarily according to guidelines of sustainability, structural change is gaining increasing dynamic.
It is essential to translate politically specified sustainability goals into socially accepted and marketable technical solutions. Production research is meeting this challenge and will make important contributions and provide innovative solutions from different perspectives.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 179781 lei  6-8 săpt.
  Springer International Publishing – 6 sep 2022 179781 lei  6-8 săpt.
Hardback (1) 180414 lei  6-8 săpt.
  Springer International Publishing – 5 sep 2021 180414 lei  6-8 săpt.

Din seria Lecture Notes in Production Engineering

Preț: 180414 lei

Preț vechi: 220017 lei
-18% Nou

Puncte Express: 2706
Preț estimativ în valută:
34539€ • 35901$ • 28636£

Carte tipărită la comandă

Livrare economică 06-20 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783030784232
ISBN-10: 3030784231
Pagini: 688
Ilustrații: XV, 688 p. 385 illus., 310 illus. in color.
Dimensiuni: 155 x 235 mm
Greutate: 1.16 kg
Ediția:1st ed. 2022
Editura: Springer International Publishing
Colecția Springer
Seria Lecture Notes in Production Engineering

Locul publicării:Cham, Switzerland

Cuprins

Concept Development and Validation of Manufacturing Processes for the Integration of Current-Carrying Conductors in Ceramic Substrates.- Development of a multi-physical kinetics model for electrodynamic machine hammer peening using machine learning approaches.- Data-based approach to support the implementation of new product variants in digital assembly assistance systems.- Databased Decision Support for the Design of Business Processes in Manufacturing Companies.- Quality Improvement through Data Analysis – Qualification of Failure Management by Standardized Failure Recording in Manual Assembly.

Notă biografică

Prof. Dr.-Ing. Bernd-Arno Behrens studied Mechanical Engineering at the Leibniz University of Hannover and received his doctorate in 1997 in the field of solid forming. Subsequently, he took over a leading position in industry. Since October 2003 he heads the Institute for Forming Technology and Machines. In addition, he is spokesman of the board of the Material Testing Institute for Materials and Production Technology (MPA) in Hannover since 2004. In 2005 he also assumed the function of managing partner of IPH - Institut für Integrierte Produktion + Hannover gemeinnützige GmbH. He is among others, speaker of the Collaborative Research Center 1153 "Tailored Forming", as well as member of the SFB 653 and location speaker of the TR73. He is a member of the Scientific Council of the AIF, he leads the Arbeitsgemeinschaft Umformtechnik in Germany.

Prof. Dr.-Ing. Alexander Brosius studied Mechanical Engineering at the Technische Fachhochschule (TFH) Berlin and received his doctorate from the TU Dortmund in 2005. In 2010 he became an Assistant Professor “Modelling and Simulation in Forming Technology and Lightweight Construction” at the TU Dortmund. Since 2012, he holds the professorship for Forming Manufacturing Processes at the TU Dresden, where he also is Director of the Institute for Manufacturing Technology since October 2018. Prof. Brosius is a member of the Scientific Society for Production Technology (WGP) since 2018 and an Associate Member of the International Academy for Production Engineering (CIRP) since 2019.

Prof. Dr.-Ing. Welf-Guntram Drossel studied Information Technology and Technical Acoustics at the Technische Universität Dresden and obtained his doctorate in the field of simulation of forming processes in 1998 at the Institute for Metal Forming at the TU Bergakademie Freiberg. In 2004 he gained a teaching position at the Technische Universität Chemnitz in Machine Tools – Mechatronics, became Associate Professor in 2006 and was appointed to the full professorship of Adaptronics and Functional Lightweight Design in 2014. He has also been Director of the Fraunhofer-Institute for Machine Tools and Forming Technology since October 2014. Prof. Drossel is an Associate Member of the International Academy for Production Engineering (CIRP) and Board Member of the European Research Association for Sheet Metal Working. He is also consultant for several Science Foundations.

Prof. Dr.-Ing. Wolfgang Hintze studied Mechanical Engineering at the TU Braunschweig, where he became research assistant working on gear grinding and dressing. In 1985 he moved to the TU Hamburg (TUHH) and received his doctorate in 1990 dealing with the model-based chip break assessment. Subsequently, he was responsible at Krupp Widia for the development and rapid prototyping of indexable inserts, the test field and demonstration center. In 1999 he took over the production engineering department of IPMT at the TU Hamburg. His main areas of research include machining technologies for lightweight structures, e.g. for CFRP and titanium, and extremely hard machining as well as digitalized machining systems. Since 2008 he is in a research cooperation with Fraunhofer IFAM and has developed innovative solutions for the automated production and assembly of large structures on a scale of 1:1. Since 2009 Prof. Hermann Lödding and Prof. Wolfgang Hintze lead the IPMT together.

Prof. Dr.-Ing. Steffen Ihlenfeldt studied Mechanical Engineering at the TU Braunschweig and received his doctorate from the TU Chemnitz in 2012. In 2015 he took over as head of the Chair of Machine Tools Development and Adaptive Controls at the Institute of Machine Tools and Control Engineering (IWM) – now the Institute of Mechatronic Engineering (IMD) – at the TU Dresden. Since 2016 he is also head of the Department of Cyber-Physical Production Systems (CPPS) at the Fraunhofer Institute for Machine Tools and Forming Technology IWU and a member of the German Academic Association for Production Technology (WGP).

Prof. Dr.-Ing. Peter Nyhuis studied Mechanical Engineering at the Leibniz University of Hannover. He obtained his doctorate in 1991 at the Institute of Production Systems and Logistics (IFA) under Prof. Wiendahl. In 1999 he completed his habilitation in the field of production logistics. From 1999 to 2003 he worked for Siemens AG in the SPLS Supply Chain Consulting devision. As a partner, he was responsible for supply chain management and supply chain design. In 2003 he was appointed to the Leibniz University of Hannover. As Managing Director of the IFA, he represents the research and teaching fields of factory planning, production logistics, production design and labour science. Since 2008 he has also been managing partner of the Institut für integrierte Produktion Hannover gGmbH (IPH). Prof. Nyhuisis a member of the Scientific Society for Production Technology (WGP), the Academic Society for Work and Industrial Organization (WGAB) and of the Academy of Engineering Sciences (acatech). Since July 2020 he has been Dean of the Faculty of Mechanical Engineering at the Leibniz University Hannover.


Textul de pe ultima copertă

This congress proceedings provides recent research on leading-edge manufacturing processes. The aim of this scientific congress is to work out diverse individual solutions of "production at the leading edge of technolgy" and transferable methodological approaches. In addition, guest speakers with different backgrounds will give the congress participants food for thoughts, interpretations, views and suggestions.
The manufacturing industry is currently undergoing a profound structural change, which on the one hand produces innovative solutions through the use of high-performance communication and information technology, and on the other hand is driven by new requirements for goods, especially in the mobility and energy sector. With the social discourse on how we should live and act primarily according to guidelines of sustainability, structural change is gaining increasing dynamic.
It is essential to translate politically specified sustainability goals into socially accepted and marketable technical solutions. Production research is meeting this challenge and will make important contributions and provide innovative solutions from different perspectives.


Caracteristici

Provides recent research on leading-edge manufacturing processes Contains selected papers from the WGP Annual Congress 2021 Of interest to researchers and practitioners