Cantitate/Preț
Produs

Protection against Erosive Wear using Thermal Sprayed Cermet: A Review

Autor Carlos P. Bergmann, Juliane Vicenzi
en Limba Engleză Paperback – 7 oct 2014
Erosive wear is characterized by successive loss of material from the surface due to the continuous impact of solid particles. This type of wear affects numerous industries, such as power generation, mining, and the pneumatic transportation of solids. The worst case scenario normally occurs where there is a combination of both erosion and oxidation, especially at high temperatures. In order to minimize damage caused by erosive wear, many authors propose the use of better bulk materials or surface coatings, and generally cermets are suggested. Various researchers have conducted experiments to study the wear mechanisms occurring in this kind of materials, but most of these experiments do not lead to similar results; in fact, there is no accordance among the authors, and moreover, some wear variables are ignored. In this book, studies undertaken in this field by several investigators have been discussed extensively. At the end of it, table reviews are suggested to summarize the most important mechanisms of the erosive wear in bulk and coating cermets.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 61237 lei  6-8 săpt.
  Springer Berlin, Heidelberg – 7 oct 2014 61237 lei  6-8 săpt.
Hardback (1) 61822 lei  6-8 săpt.
  Springer Berlin, Heidelberg – 2 iul 2011 61822 lei  6-8 săpt.

Preț: 61237 lei

Preț vechi: 72044 lei
-15% Nou

Puncte Express: 919

Preț estimativ în valută:
11719 12326$ 9762£

Carte tipărită la comandă

Livrare economică 04-18 ianuarie 25

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783642430459
ISBN-10: 3642430457
Pagini: 92
Ilustrații: VII, 82 p.
Dimensiuni: 155 x 235 x 5 mm
Greutate: 0.14 kg
Ediția:2011
Editura: Springer Berlin, Heidelberg
Colecția Springer
Locul publicării:Berlin, Heidelberg, Germany

Public țintă

Research

Cuprins

Introduction.- Coating Cermets production.- Erosive wear.- Erosive wear in bulk cermets.- Erosive wear in coating cermets.- Table review.- Final Considerations.

Textul de pe ultima copertă

Erosive wear is characterized by successive loss of material from the surface due to the continuous impact of solid particles. This type of wear affects numerous industries, such as power generation, mining, and the pneumatic transportation of solids. The worst case scenario normally occurs where there is a combination of both erosion and oxidation, especially at high temperatures. In order to minimize damage caused by erosive wear, many authors propose the use of better bulk materials or surface coatings, and generally cermets are suggested. Various researchers have conducted experiments to study the wear mechanisms occurring in this kind of materials, but most of these experiments do not lead to similar results; in fact, there is no accordance among the authors, and moreover, some wear variables are ignored. In this book, studies undertaken in this field by several investigators have been discussed extensively. At the end of it, table reviews are suggested to summarize the most important mechanisms of the erosive wear in bulk and coating cermets.

Caracteristici

No similar books in the field Important subject in the Surface Engineering field Up-to-date review