Cantitate/Preț
Produs
Total produse
Vezi coșul
Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 6: Proceedings of the 2022 Annual Conference on Experimental and Applied Mechanics de Rachael C Tighe

Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 6: Proceedings of the 2022 Annual Conference on Experimental and Applied Mechanics: Conference Proceedings of the Society for Experimental Mechanics Series

Editat de Rachael C Tighe, John Considine, Sharlotte L.B. Kramer, Tom Berfield
en Limba Engleză Paperback – 3 ian 2024
Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 6 of the Proceedings of the 2022 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of six from the Conference, brings together contributions to this important area of research and engineering.  The collection presents early findings and case studies on a wide range of areas, including:  
Test Design and Inverse Method Algorithms
Inverse Problems: Virtual Fields Method
Material Characterizations Using Thermography
Fatigue, Damage & Fracture Evaluation Using Infrared Thermography
Residual Stress Mechanics of Additive & Advanced Manufactured Materials
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 134658 lei  43-57 zile
  Springer International Publishing – 3 ian 2024 134658 lei  43-57 zile
Hardback (1) 135415 lei  22-36 zile
  Springer International Publishing – 2 ian 2023 135415 lei  22-36 zile

Din seria Conference Proceedings of the Society for Experimental Mechanics Series

Preț: 134658 lei

Preț vechi: 164218 lei
-18% Nou

Puncte Express: 2020
Preț estimativ în valută:
25771€ • 26769$ • 21406£

Carte tipărită la comandă

Livrare economică 03-17 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783031174773
ISBN-10: 3031174771
Pagini: 93
Ilustrații: VII, 93 p. 74 illus., 63 illus. in color.
Dimensiuni: 210 x 279 mm
Greutate: 0.25 kg
Ediția:1st ed. 2023
Editura: Springer International Publishing
Colecția Springer
Seria Conference Proceedings of the Society for Experimental Mechanics Series

Locul publicării:Cham, Switzerland

Cuprins

Evaluation of the Maximum Allowable Hole Depth for IHD of GFRP Laminates.- Analysis of Intrinsic Dissipations and Fatigue Behaviour of Steels by Measuring Thermal and Mechanical Signals During Fatigue Tests.- Analysis of the Fracture Mechanics Behaviour of an Additive Manufactured Titanium alloy via a Thermography-based Technique.- Non-Destructive Evaluation of Hot-Spots using the IR Thermography.- Modeling Micrometeoroid and Orbital Debris Impact on Composite Truss Tubes.- Identification of Subsurface Damage in Multi-directional Composite Laminates using Full Field Imaging.- Detection Analysis for Sub-superficial Defects in Additive Manufactured Metal Samples by Means of Flash Thermography.- The Miura Ori Geometry: from Brilliant Theory to Surprising Auxetic Properties.- Flow Visualization in the Extrusion of Highly Filled Polymer Composites for Additive Manufacturing.- Additive Manufacturing of Graded Voronoi Cellular Structures for Increased Design Flexibility.- Investigation of Microstructure and Mechancial Properties of Additive Manufacturing Fabricated Oxide Dispersion Strengthening (ODS) IN718 Alloys.- A Contactless Nondestructive Evaluation Technique to Measure Axial Stress in Continuous Welded Rails.

Notă biografică

Rachael Tighe, University of Waikato, New Zealand; John Considine, United States Department of Agriculture, Forest Service, Forest Products Laboratory, WI, USA; Sharlotte L.B. Kramer, Sandia National Laboratories, NM, USA; Tom Berfield, University of Louisville, KY, USA

Textul de pe ultima copertă

Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 6 of the Proceedings of the 2022 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of six from the Conference, brings together contributions to this important area of research and engineering.  The collection presents early findings and case studies on a wide range of areas, including:  Test Design and Inverse Method Algorithms
Inverse Problems: Virtual Fields Method
Material Characterizations Using Thermography
Fatigue, Damage & Fracture Evaluation Using Infrared Thermography
Residual StressMechanics of Additive & Advanced Manufactured Materials