Cantitate/Preț
Produs
Total produse
Vezi coșul
Industrial Heat Pump-Assisted Wood Drying de Vasile Minea

Industrial Heat Pump-Assisted Wood Drying: Advances in Drying Science and Technology

Autor Vasile Minea
en Limba Engleză Paperback – 31 mar 2021
This book discusses conventional as well as unconventional wood drying technologies. It covers fundamental thermophysical and energetic aspects and integrates two complex thermodynamic systems, conventional kilns and heat pumps, aimed at improving the energy performance of dryers and the final quality of dried lumber. It discusses advanced components, kiln energy requirements, modeling, and software and emphasizes dryer/heat pump optimum coupling, control, and energy efficiency. Problems are included in most chapters as practical, numerical examples for process and system/components calculation and design. The book presents promising advancements and R&D challenges and future requirements.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 32242 lei  6-8 săpt.
  CRC Press – 31 mar 2021 32242 lei  6-8 săpt.
Hardback (1) 105069 lei  6-8 săpt.
  CRC Press – 15 aug 2018 105069 lei  6-8 săpt.

Din seria Advances in Drying Science and Technology

Preț: 32242 lei

Preț vechi: 36262 lei
-11% Nou

Puncte Express: 484
Preț estimativ în valută:
6171€ • 6510$ • 5142£

Carte tipărită la comandă

Livrare economică 02-16 ianuarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9780367780982
ISBN-10: 0367780984
Pagini: 728
Dimensiuni: 156 x 234 x 45 mm
Greutate: 1.02 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press
Seria Advances in Drying Science and Technology

Cuprins

1. Introduction 2. Wood 3. Moisture in Wood 4. Moist Air 5. Importance of Wood Drying 6. Wood Drying Methods 7. Mechanisms of Lumber Drying 8. Kiln-Wide Lumber Drying 9. Heat Pump-Assisted Wood Dryers 10. Heat Pump Systems for Drying 11. Refrigerants 12. Heat Exchangers without Phase Changes 13. Moisture Condensers 14. Refrigerant-to-Air Condensers 15. Heat Pump Modeling 16. Case Studies 17. Present and Future R&D Challenges

Notă biografică

Vasile Minea is a PhD graduate of civil, industrial and agricultural installation engineering faculty from the Bucharest Technical Construction University, Romania. He worked as a professor at that university for more than 15 years, teaching courses such as HVAC systems for civil, agricultural, and industrial buildings, as well as thermodynamics, heat transfer, and refrigeration. During this period, his R&D works focused on heat exchangers, heat pump and heat recovery systems, and development and experimentation of advanced compression-absorption/ resorption heat pumps concepts, as well as on the usage of solar energy for comfort cooling processes and industrial cold and ice production. Since 1987, Dr. Minea has been working as a scientist researcher at the Hydro- Québec Research Institute, Canada. His research activity mainly focuses on commercial and industrial refrigeration, heat recovery and geothermal heat pump systems, low-enthalpy power generation cycles, and heat pump drying. During the past 15 years, he collaborated with the Canadian and American heat pump drying industry and R&D drying community in developing laboratory- and industrial-scale experimental prototypes. Drying of various products such as vegetables, agricultural, biological products, and wood has been theoretically and experimentally studied and results have been published in several drying conference proceedings and in prestigious journals such as Drying Technology, International Journal of Refrigeration, Applied Thermal Engineering, and IEA Heat Pump Centre Newsletter .

Recenzii

"The book Industrial Heat Pump-Assisted Wood Drying by Vasile Minea is a complete guidebook on the application of heat pump-assisted dryer in the lumber drying, covering various aspects ranging from fundamental knowledge on wood properties and mechanism of wood drying (Chapter 1 to 8) to advancement of heat pump-assisted drying technologies (Chapter 9 to 17)...It is highly recommended to the users from industrial and academia who need a one stop solution for their enquiries on heat pump-assisted dryer either in wood drying or other agricultural and biological materials drying."
--Dr. Sze Pheng Ong, University of Nottingham Malaysia

Descriere

This book discusses conventional as well as unconventional wood drying technologies. It covers fundamental thermophysical and energetic aspects and integrates two complex thermodynamic systems, conventional kilns and heat pumps, aimed at improving the energy performance of dryers and the final quality of dried lumber.