Cantitate/Preț
Produs
Total produse
Vezi coșul
Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Microstructural Worthiness: Fatigue Crack Growth Behaviour of Small and Large Bodies de George C. Sih

Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Microstructural Worthiness: Fatigue Crack Growth Behaviour of Small and Large Bodies: Solid Mechanics and Its Applications, cartea 152

Editat de George C. Sih
en Limba Engleză Hardback – 15 iul 2008
What can be added to the fracture mechanics of metal fatigue that has not already been said since the 1900s? From the view point of the material and structure engineer, there are many aspects of failure by fatigue that are in need of attention, particularly when the size and time of the working components are changed by orders of magnitude from those considered by st traditional means. The 21 century marks an era of technology transition where structures are made larger and devices are made smaller, rendering the method of destructive testing unpractical. While health monitoring entered the field of science and engineering, the practitioners are discovering that the correlation between the signal and the location of interest depends on a priori knowledge of where failure may initiate. This information is not easy to find because the integrity of the physical system will change with time. Required is software that can self-adjust in time according to the monitored data. In this connection, effective application of health monitoring can use a predictive model of fatigue crack growth. Earlier fatigue crack growth models assumed functional dependence on the maximum stress and the size of the pre-existing crack or defect. Various possibilities were examined in the hope that the data could be grouped such that linear interpolation would apply.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 176816 lei  43-57 zile
  SPRINGER NETHERLANDS – 28 oct 2010 176816 lei  43-57 zile
Hardback (1) 177414 lei  43-57 zile
  SPRINGER NETHERLANDS – 15 iul 2008 177414 lei  43-57 zile

Din seria Solid Mechanics and Its Applications

Preț: 177414 lei

Preț vechi: 216359 lei
-18% Nou

Puncte Express: 2661
Preț estimativ în valută:
33957€ • 35391$ • 28267£

Carte tipărită la comandă

Livrare economică 06-20 ianuarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9781402085192
ISBN-10: 1402085192
Pagini: 396
Ilustrații: XIV, 380 p.
Dimensiuni: 155 x 235 x 27 mm
Greutate: 0.73 kg
Ediția:2008
Editura: SPRINGER NETHERLANDS
Colecția Springer
Seria Solid Mechanics and Its Applications

Locul publicării:Dordrecht, Netherlands

Public țintă

Professional/practitioner

Cuprins

Application of Virtual Testing for Obtaining Fracture Allowable of Aerospace and Aircraft Materials.- An Equivalent Block Approach to Crack Growth.- Prediction of Fatigue Crack Growth Rates in Ti-6Al-4V Alloy.- Some Practical Implications of Exponential Crack Growth.- Fatigue Behaviour of FS, LB and MIG Welds of AA6061-T6 and AA6082-T6.- Fatigue Damage from Surface to Bulk.- Microcracking in High Temperature Low Cycle Fatigue.- Invariant Form of Micro-/Macro-Cracking in Fatigue.- Fatigue Crack Growth Rate of Cable-Stayed Portion of Runyang Bridge: Part I – Cable Crack Growth Due to Disproportionate Cable Tightening/Loosening and Traffic Loading.- Fatigue Crack Growth Rate of Cable-Stayed Portion of Runyang Bridge: Part II – Steel Wire Crack Growth Due to Disproportionate Cable Tightening/Loosening and Traffic Loading.- Fatigue of Small-Scale Metal Materials: From Micro- to Nano-Scale.- Assessment of Fatigue Damage in Heterogeneous Materials by Application of a Novel Compliance Technique.- Fatigue Crack Growth of Aircraft Aluminum Alloys.

Notă biografică

Dr. George C. M. Sih
Visiting Professor of Mechanical Engineering
East China University of Science and Technology, Shanghai 200237, China
Visiting Professor of Institute of Mechanics
Chinese Academy of Sciences, Beijing 100080, China
and
Emeritus Professor of Mechanics and Director of the
Institute of Fracture and Solid Mechanics
Lehigh University, Bethlehem PA 18015, USA

Dr Sih is currently a Visiting Professor in the Department of Mechanical Engineering at the East China University of Science and Technology, Shanghai, China. He is also a Visiting Professor of the Institute of Mechanics at the Chinese Academy of Sciences in Beijing, China. He served as Director of the Institute of Fracture and Solid Mechanics at Lehigh University, Bethlehem PA. USA. Dr Sih received his B. S. at the University of Portland, Oregon, 1953; his M. S. at New York University, 1958; and his Ph.D. at Lehigh University, 1960, all of which are in Mechanical Engineering.
Dr. Sih served as Visiting Professor in USA, Europe and Asia. Among the universities are:
. Aeronautics at the California Institute of Technology, Pasadena, California,
USA
0 Hahnemann Medical College and Hospital of Philadelphia, PA, USA
. Mechanical and Aeronautical Engineering at University of Patras, Patras, Greece
Dr. Sih has also served as Consultants and Principle Investigators to the following companies and US government agencies:
Administration
In his earlier research works, Dr. Sih was involved with the development of high performance and design of materials by making use of the discipline of "Fracture Mechanics". He specializes in computer simulation of the mechanical behavior of structures and the aerodynamic stability of solids moving through fluid media. This includes the transonic-fiutter of airfoils; high speed projectile/target penetration; non-destructive testing methods, etc. His more recent activities are concerned with thetheories of nonequilibrium thermomechanics applied to scaling of size, time and temperature effects for nanomaterials. His more recent interest has been involved with
the aging of polymeric (and metallic) materials where chemical reactions would alter the structural arrangements of the molecules owing to specimen size, time and temperature effects. Much of his recent publications have been associated with "mesomechanics" in an attempt to understand how hetero-structures due to imperfections at the nano- and meso-scale would affect material behavior at the macroscopic scale.
Dr. Sih has organized more than 30 international conferences, published 8 books and more than 380 technical papers. He has memberships to many professional societies in addition to being the recipient of awards from technical societies.
Recent publications:
[1] G.C. Sih , Implication of scaling hierarchy associated with nonequilibrium:
field and particulate. Prospects ofmesomechanics in the 2Pt century, G.C. Sih and V.E. Panin, eds.. Special issue ofJ. ofTheoretical andApplied Fracture Mechanics, 37,(2002)
335-369.
[2] G.C. Sih, B. Liu (2002), Mesofracture mechanics: a necessary link, Prospects of mesomechanics in the 2ft century, G.C. Sih and V.E. Panin, eds., Special issue of of Theoretical and Applied Fracture Mechanics, 37, (2002) 37 1-395.
[3] G.C. Sih, A field model interpretation ofcrack initiation and growth behavior in ferrelectric ceramics: change of poling direction and boundary condition, J. of Theoretical and Applied Fracture Mechanics, 38(1) (2002) 1-14.
[4] G. C. Sih and E.P. Chen, Dilatational and distortional behavior of cracks in magnetoelectroelastic materials J. of Theoretical and Applied Fracture Mechanics, 39(3),
(2003) 1-21.
[5] G. C. Sih and S. T. Tu, Why, where and when it becomes necessary to consider chemical reaction effect in mechanics, in: G. C. Sih, S. T. Tu and Z. D. Wang, Fracture Mechanics and Applications: Structural Integrity and Aging, East China Univer. Sci. and Tech., Press (2003) 1-19
[6J G. C. Sih, Crack surface displacement trespassing the Rayleigh wave speed barrier as influenced by velocity and applied stress dependent local zone of restrain, J. of Theoretical and Applied Fracture Mechanics, 41, (2004) 185-231..
[7] G. C. Sih, Survive with the time o’clock of nature, G. C. Sih and LNobile, eds., Tipografia Moderna, Bologna, Italy (2004) 1-17.
[8] G. C. Sih, Mathematics needed for the development of mesomechanics:
complications associated with singularity, dimensionality and inhomogeneity, G.
C. Sih and C. P. Spyropoulos, eds., Eptalefos SA, Athens, Greece (2004) 1-22.
[9] G. C. Sih and X. S. Tang, Singularity representation of multiscale damage due to inhomogeneity with mesomechanics consideration, G. C. Sih, T. Kermanidis and Sp. Pantelakis, eds., Sarantidis Publications, Patras, Greece (2004) 1-15.

Textul de pe ultima copertă

This book elucidates the correlation of fatigue crack growth data to multiscale cracking, particularly to the understanding of micrographs influenced by mechanical disturbance and thermodynamic variables. Attention is given to the interpretation of test data by fatigue crack growth rate using two empirical parameters in consistence with the fracture control methodology currently used by industry. Micrograph and crack growth rate data are presented for a host of metals used by the aerospace and nuclear industry. Furthermore, these data can be shown to lie on a straight line for the two parameter model that traditionally refers to regions I, II, and III. Results for small and large cracks can thus be connected to provide fatigue life prediction with data from the microscopic scale level such that the interactive effects of loading, geometry and material by mechanical tests are accounted for.

Caracteristici

Transition of micro-fatigue crack growth to the macro scale Multiscale data representation by two-parameter fatigue crack growth relation Microstructural cracking details identified with crack growth rates Effects of micro-specimen damage in contrast to macro-size specimens