Cantitate/Preț
Produs
Total produse
Vezi coșul
Operations Management in Automotive Industries: From Industrial Strategies to Production Resources Management, Through the Industrialization Process and Supply Chain to Pursue Value Creation de Marco Gobetto

Operations Management in Automotive Industries: From Industrial Strategies to Production Resources Management, Through the Industrialization Process and Supply Chain to Pursue Value Creation: Springer Series in Advanced Manufacturing

Autor Marco Gobetto
en Limba Engleză Hardback – 7 noi 2013
This book has proved its worth over the years as a text for courses in Production Management at the Faculty of Automotive Engineering in Turin, Italy, but deserves a wider audience as it presents a compendium of basics on Industrial Management, since it covers all major topics required. It treats all subjects from product development and “make or buy”-decision strategies to the manufacturing systems setting and management through analysis of the main resources needed in production and finally exploring the supply chain management and the procurement techniques. The very last chapter recapitulates the previous ones by analysing key management indicators to pursue the value creation that is the real purpose of every industrial enterprise. As an appendix, a specific chapter is dedicated to the basics of production management where all main relevant definitions, techniques and criteria are treated, including some numerical examples, in order to provide an adequate foundation for understanding the other chapters. This book will be of use not only to Automotive Engineering students but a wide range of readers who wish to gain insight in the world of automotive engineering and the automotive industry in general.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 55134 lei  38-44 zile
  SPRINGER NETHERLANDS – 23 aug 2016 55134 lei  38-44 zile
Hardback (1) 56215 lei  38-44 zile
  SPRINGER NETHERLANDS – 7 noi 2013 56215 lei  38-44 zile

Din seria Springer Series in Advanced Manufacturing

Preț: 56215 lei

Preț vechi: 69401 lei
-19% Nou

Puncte Express: 843
Preț estimativ în valută:
10758€ • 11175$ • 8936£

Carte tipărită la comandă

Livrare economică 29 ianuarie-04 februarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9789400775923
ISBN-10: 940077592X
Pagini: 268
Ilustrații: XXII, 245 p. 81 illus.
Dimensiuni: 155 x 235 x 20 mm
Greutate: 0.55 kg
Ediția:2014
Editura: SPRINGER NETHERLANDS
Colecția Springer
Seria Springer Series in Advanced Manufacturing

Locul publicării:Dordrecht, Netherlands

Public țintă

Professional/practitioner

Cuprins

Foreword.- About the author.- Introduction.- Acknowledgements.- 1 Historical Outlines and Industrial Strategies for Automotive Industries.- 1.1 Historical Outlines in Automotive Industries.- 1.2 Strategic Planning of Production Activities.- 1.3 Process Integration and “Make or Buy” Decision Making.- 1.4 Manufacturing Systems’ Set-Up and Location Criteria.- 1.5 Technologies for Materials Applied to Vehicles’ Construction Overview.- 1.6 Sketches for Manufacturing Systems Adopted in Cars Manufacturing.- 1.7 Systems’ Strategical Prerogatives.- 2 From project to product.- 2.1 Standardization Logics and Project Setting Up.- 2.2 Industrialization Process Description.- 2.3 Product/Process Information Technology System.- 2.4 Product Composition Analysis.- 2.5 Product Technical Changes Management.- 3 Manufacturing Engineering and Equipment Efficiency Evaluation.- 3.1 Manufacturing Engineering Planning and Executive Project.- 3.2 Production Capacity Setting.- 3.3 Working Time Analysis Methodologies.- 3.4 Man/Machine Interaction and Standard Working Time Defining.- 3.5 Equipment Times Deployment Diagram.- 3.6 Integrated Production System Introduction.- 3.7 Operative Productivity and Flexibility.- 3.8 Equipment and Machine Loading.- 3.9 Installed Productive Capacity Defining.- 4 Work Analysis and Labour Productivity Evaluation Criteria.- 4.1 Activity Level and Labour Efficiency.- 4.2 Manpower Planning.- 4.3 Working Time Length and Flexibility.- 4.4 Labour Productivity and Improvement Plans.- 4.5 Input Data for Operative Control.- 4.6 Tasks Assignment and Workload Balancing.- 4.7 Production Employees Motivation and Rewarding.- 5 Manufacturing System Management and Maintenance Criteria.- 5.1 Plant Manufacturing System.- 5.2 Equipment Reliability and Maintainability.- 5.3 Maintenance Management.- 5.4 Costs and Maintenance Effectiveness Correlation.- 5.5 General and Complementary Equipment for Production.- 5.6 Tools andConsumables Management.- 5.7 “Total Productive Maintenance” approach.- 6 Logistics and Supply Chain Basics for Automotive Application.- 6.1 Logistics Historical Evolution and Actual Strategies.- 6.2 Logistics Flows in the Supply Chain.- 6.3 Material Handling and Inventory Management Methodologies.- 6.4 Production and Delivery Planning.- 6.5 Logistics Information Technology Systems.- 6.6 Logistics Key Performance Indicators.- 7 Global Purchasing Operations.- 7.1 Purchasing Department’s Role.- 7.2 Purchasing Policies Evolution.- 7.3 Purchasing Marketing and Global Sourcing Policies.- 7.4 Suppliers Network Management.- 7.5 Order Procedure and Cooperation Agreements.- 7.6 Supplying Cost and Purchasing Effectiveness Indicators.- 7.7. “E-Procurement” Techniques.- 8 Quality Management and Continuous Improvement.- 8.1 The “Learning Curve” Concept.- 8.2 Production Ramp Up and Maximum Rate Achievement.- 8.3 Quality Management in Industrial Processes.- 8.4 Quality and Reliability Assurance Techniques in Product Design Phase.- 8.5 “Total Quality Management” and Continuous Improvement Approach.- 9 Value Creation and Final Considerations.- 10 (APPENDIX) Production Management Basics.- 10.1 The Product.- 10.2 Production Systems.- 10.3 Criteria for the Stock and Lots Management.- 10.4 Problems Connected to the Planning Horizon.- 10.5 APP (Aggregated Production Planning).- 10.6 MPS (Master Production Schedule).- 10.7 MRP (Material Requirement Planning).- List of Abbreviations.

Notă biografică

Marco Gobetto was born in Rimini (RN, Italy) in 1967 and took his master’s degree in Electronic Engineering in 1993 at Politecnico of Turin.
He currently holds positions as Manufacturing Training Unit Manager at FIAT Sepin S.c.p.A. and Professor at the Faculty of Automotive Engineering.  He has taught courses in both Production Management and Production Processes, Safety, Organization and Management.
After having complete his University studies, he began his professional career at FIAT Auto S.p.A. in the Manufacturing Engineering Department, as part of the Style Design Manufacturing Analysis Team. From there he proceeded to the position of  Body in White Process Engineer, contributing to the production launches of two new cars in Italy and then coordinating industrialization activities in Poland for a new body in white  model.
In 1998 he moved to Ferrari S.p.A. as Body in White Plant Manager at the “Carrozzeria Scaglietti”  facility in Modena.
In 2000 he left FIAT to assume responsibility for the Manufacturing Engineering Department at Carrozzeria Bertone S.p.A. in Grugliasco (TO,, Italy).  {AU:  PLEASE CONFIRM “TO,,” IT IS OK, IT STANDS FOR “TORINO PREFECTURE” } In two years, three new models of vehicles were launched and, for the first time in Bertone history, second and third shifts in production were activated.
At the beginning of 2002 he rejoined the FIAT Group at ISVOR FIAT S.c.p.A. where he specialized in Total Productive Maintenance and Continuous Improvement training programs, following on  IVECO and FIAT Powertrain sectors. He subsequently coordinated international training initiatives for a joint venture in India between FIAT and TATA.  In 2007 he assumed responsibility for the Manufacturing, Quality and Product Development Training Area that, at the end of 2008, became the central Manufacturing Training Unit in the new training organization in FIAT, thereby contributing to all initiativesworldwide both in FIAT and Chrysler LLC with a major focus on World Class Manufacturing, the Corporate Production System.

Textul de pe ultima copertă

This book has proved its worth over the years as a text for courses in Production Management at the Faculty of Automotive Engineering in Turin, Italy, but deserves a wider audience as it presents a compendium of basics on Industrial Management, since it covers all major topics required. It treats all subjects from product development and “make or buy”-decision strategies to the manufacturing systems setting and management through analysis of the main resources needed in production and finally exploring the supply chain management and the procurement techniques. The very last chapter recapitulates the previous ones by analysing key management indicators to pursue the value creation that is the real purpose of every industrial enterprise. As an appendix, a specific chapter is dedicated to the basics of production management where all main relevant definitions, techniques and criteria are treated, including some numerical examples, in order to provide an adequate foundation for understanding the other chapters. This book will be of use not only to Automotive Engineering students but a wide range of readers who wish to gain insight in the world of automotive engineering and the automotive industry in general.

Caracteristici

Has proven its worth in class use already Good resource to serve as introduction to topic Written by world leading expert