Cantitate/Preț
Produs

Revival: Computer Control in the Process Industries (1987): CRC Press Revivals

Autor Brian Roffel, Patrick Chin
en Limba Engleză Hardback – 12 iul 2017
Techniques such as dead time compensation, adaptive control and Kalman filtering have been around for some time, but as yet find little application in industry. This is due to several reasons, including:
  • Articles in the literature usually assume that the reader is familiar with a specific topic and are therefore often difficult for the practicing control engineer to comprehend.
  • Many practicing control engineers in the process industry have a chemical engineering background and did not receive a control engineering education.
  • There is a wide gap between theory and practical implementation, since implementation is primarily concerned with robustness, and theory is not. The user therefore has to build an "expert shell" in order to achieve the desired robustness. Little is published on this issue, however.
This book tries to promote the use of advanced control techniques by taking the reader from basic theory to practical implementation. It is therefore of interest to practicing control engineers in various types of industries, especially the process industry. Graduate and undergraduate students in control engineering will also find the book extremely useful since many practical details are given which are usually omitted in books on control engineering.
Of special interest are the simulation examples, illustrating the application of various control techniques. The examples are available on a 5-1/4" floppy disk and can be used by anyone who has access to LOTUS 1-2-3.
Chapter 1 is the introduction; Chapters 2 through 6 deal with distributed control system networks, computer system software, computer system selection, reliability and security, and batch and continuous control. Chapter 7 gives and introduction to advanced control. Chapters 8 through 11 deal with dead time compensation techniques and model identification. Chapters 12 through 14 discuss constraint control and design, and the adjustment and application of simple process models and optimization. Chapter 15 gives a thorough introduction to adaptive control, and the last two chapters deal with state and parameter estimation.
This book is a valuable tool for everyone who realizes the importance of advanced control in achieving improved plant performance. It will take the reader from theory to practical implementation.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 32297 lei  6-8 săpt.
  CRC Press – 25 ian 2019 32297 lei  6-8 săpt.
Hardback (1) 89136 lei  6-8 săpt.
  CRC Press – 12 iul 2017 89136 lei  6-8 săpt.

Din seria CRC Press Revivals

Preț: 89136 lei

Preț vechi: 108701 lei
-18% Nou

Puncte Express: 1337

Preț estimativ în valută:
17058 17708$ 14224£

Carte tipărită la comandă

Livrare economică 22 martie-05 aprilie

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9781138505261
ISBN-10: 1138505269
Pagini: 274
Dimensiuni: 156 x 234 x 16 mm
Greutate: 0.45 kg
Ediția:1
Editura: CRC Press
Colecția CRC Press
Seria CRC Press Revivals


Public țintă

Professional

Cuprins

1. Introduction 2. Distributed Computer Control System Networks 3. Computer System Software 4. Computer System Selection 5. Reliability and Security 6. Batch and Continuous Process Control 7. Introduction to Advanced Control 8. Dead Time Compensators 9. Inferential Control and Model Identification 10. Feed-Forward Control 11. Interaction and Decoupling 12. Constraint Control 13. Design, Adjustment and Application 14. Optimization 15. Self Tuning and Adaptive Controllers 16. State Observers 17. Kalman Filtering

Notă biografică

Brian Roffel is Global Advisor, Advanced Computer Control at Polysar Limited. He holds a M.Eng in chemical engineering and a Ph.D. in process control. He worked as chief senior research officer at the Twente University of Technology, and as a computer applications engineer at Esso Chemical Canada. During 1986-7 he was adjunct professor at the Universities of Western Ontario and Waterloo. He has written many publications on process dynamics and control.
Patrick A. Chin is a Computer Control Specialist at Polysar Limited. He holds a M.Eng. in chemical engineering from McMaster University with a specialization in process control. Previously he worked as a computer applications engineer at Esso Chemical Canada.

Descriere

Techniques such as dead time compensation, adaptive control and Kalman filtering have been around for some time, but as yet find little application in industry. This is due to several reasons, including:
  • Articles in the literature usually assume that the reader is familiar with a specific topic and are therefore often difficult for the practicing control engineer to comprehend.
  • Many practicing control engineers in the process industry have a chemical engineering background and did not receive a control engineering education.
  • There is a wide gap between theory and practical implementation, since implementation is primarily concerned with robustness, and theory is not. The user therefore has to build an "expert shell" in order to achieve the desired robustness. Little is published on this issue, however.
This book tries to promote the use of advanced control techniques by taking the reader from basic theory to practical implementation.