Cantitate/Preț
Produs
Total produse
Vezi coșul
Micro and Nano Fabrication: Tools and Processes de Hans H. Gatzen

Micro and Nano Fabrication: Tools and Processes

Autor Hans H. Gatzen, Volker Saile, Jürg Leuthold
en Limba Engleză Paperback – 6 oct 2016
For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 58414 lei  6-8 săpt.
  Springer Berlin, Heidelberg – 6 oct 2016 58414 lei  6-8 săpt.
Hardback (1) 72977 lei  6-8 săpt.
  Springer Berlin, Heidelberg – 20 ian 2015 72977 lei  6-8 săpt.

Preț: 58414 lei

Preț vechi: 68721 lei
-15% Nou

Puncte Express: 876
Preț estimativ în valută:
11178€ • 11760$ • 9255£

Carte tipărită la comandă

Livrare economică 15-29 ianuarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783662508268
ISBN-10: 3662508265
Pagini: 545
Ilustrații: XXVI, 519 p. 357 illus., 54 illus. in color.
Dimensiuni: 155 x 235 x 28 mm
Greutate: 0.76 kg
Ediția:2015
Editura: Springer Berlin, Heidelberg
Colecția Springer
Locul publicării:Berlin, Heidelberg, Germany

Cuprins

Introduction-MEMS, a Historical Perspective.- Vacuum Technology.- Deposition Technologies.- Etching Technologies.- Doping and Surface Modification.- Lithography.- LIGA.- Nanofabrication by Self-Assembly.- Enabling Technologies I - Wafer Planarization and Bonding.- Enabling Technologies II - Contamination Control.- Device Fabrication - An Example.

Recenzii

“The book is clearly written and easy to read. Thevarious topics are balanced and well organized. … The numerous figures andschematics are the most useful tools of the book. … It is useful to studentsand newcomers, but also experts may find it a good reference because there aresome useful aspects not easily found in other books … . the book offers a goodopportunity to go through the basic semiconductor fabrication technologies.” (RosariaA. Puglisi, MRSBulletin, Vol. 40, October, 2015)
“Provide an excellent summary and explanation for nearly every micro and nano fabrication subject that readers could possibly be interested in learning about. … this work is useful as an instructional aid with comprehension questions at the end of each chapter, as well as a chapter that contains a start-to-finish example of device fabrication. … Summing Up: Recommended. Lower- and upper-division undergraduates, graduate students, and two-year technical program students.” (N. M. Fahrenkopf,Choice, Vol. 52 (12), August, 2015)

Notă biografică

Hans Gatzen received a PhD equivalent in Mechanical Engineering from the RWTH Aachen in Aachen, Germany, and held various positions in the computer peripherals industry in Germany and the U.S. from 1973 to 1992. In 1992, he founded the Institute for Microtechnology (imt) at the Hanover University in Hanover, Germany (now Leibniz Universität Hannover) and was its director until his retirement in 2010. He is a Fellow of the American Society of Mechanical Engineers (ASME) and a member of Acatech (National Academy of Science and Engineering).
Volker Saile received a PhD in Physics from the Ludwigs-Maximilians-Universitaet München (LMU), and was later employed as a Staff Scientist at the Deutsches Elektronen-Synchrotron DESY in Hamburg, Germany, until 1989. From 1989 to 1998, he served as the Director of the J. Bennett Johnston, Sr., Center for Advanced Microstructures and Devices (CAMD), Baton Rouge, Louisana, USA. Since 1998, he is Professor of Microstructure Technology at the Karlsruhe Institute of Technology (KIT). Currently, he serves as Head of the KIT Division 5, Physics and Mathematics.
Juerg Leuthold is the head of the Institute of Electromagnetic Fields (IEF) at ETH Zurich, Switzerland. His research interests are in the field of nano-photonics, plasmonics, integrated optics and optical communications. From 2004 to 2013 he was a full Professor at the Karlsruhe Institute of Technology (KIT) in Germany and from 1999 to 2004 he was affiliated with Bell Labs,
Lucent Technologies.  

Textul de pe ultima copertă

For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.

Caracteristici

Describes the tools required for fabricating MNEMS systems Gives insight into the process technologies Fits for practitioners and students of MNEMS Includes supplementary material: sn.pub/extras