Cantitate/Preț
Produs
Total produse
Vezi coșul
High Efficiency Power Amplifier Design for 28 GHz 5G Transmitters de Nourhan Elsayed

High Efficiency Power Amplifier Design for 28 GHz 5G Transmitters: Analog Circuits and Signal Processing

Autor Nourhan Elsayed, Hani Saleh, Baker Mohammad, Mohammed Ismail, Mihai Sanduleanu
en Limba Engleză Paperback – 4 feb 2023
This book introduces power amplifier design in 22nm FDSOI CMOS dedicated towards 5G applications at 28 GHz and presents 4 state-of-the-art power amplifier designs.  The authors discuss power amplifier performance metrics, design trade-offs, and presents different power amplifier classes utilizing efficiency enhancement techniques at 28 GHz. The book presents the design process from theory, simulation, layout, and finally measurement results.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 55850 lei  6-8 săpt.
  Springer International Publishing – 4 feb 2023 55850 lei  6-8 săpt.
Hardback (1) 56439 lei  6-8 săpt.
  Springer International Publishing – 3 feb 2022 56439 lei  6-8 săpt.

Din seria Analog Circuits and Signal Processing

Preț: 55850 lei

Preț vechi: 65706 lei
-15% Nou

Puncte Express: 838
Preț estimativ în valută:
10689€ • 11276$ • 8908£

Carte tipărită la comandă

Livrare economică 03-17 ianuarie 25

 Adaugă în coș

Wish list
Gift list
Am citit!
Adaugă în listă
Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783030927486
ISBN-10: 3030927482
Pagini: 94
Ilustrații: XVI, 94 p. 91 illus., 70 illus. in color.
Dimensiuni: 155 x 235 mm
Greutate: 0.17 kg
Ediția:1st ed. 2022
Editura: Springer International Publishing
Colecția Springer
Seria Analog Circuits and Signal Processing

Locul publicării:Cham, Switzerland

Cuprins

Introduction.- Power Amplifier Fundamentals.- Doherty Power Amplifier Design.- Stacked Class-E Power Amplifier.- Doherty Class-E Power Amplifier.- Inverse Class-D Power Amplifier.- Phased-Array transmitter.

Notă biografică

Nourhan Elsayed received her PhD Degree in Electrical and Computer Engineering in 2020, Khalifa University. She  received  her  BSc.  in  Electrical  and  Electronics  Engineering  in  2014  from Khalifa  University,  Abu  Dhabi,  UAE.  She  then  received her MSc. in Electrical Engineering from The Petroleum Institute,  Abu Dhabi,  UAE  in  2016.  Nourhan’s research work  is  in  RF  circuit design,  specifically high efficiency transmitter design for 5G applications. She has been working on multiple mm-wave designs in 22nm FDSOI including switching amplifiers and efficiency enhancement techniques.
 
Hani Saleh (SM’16) is an assistant professor of electronic engineering at Khalifa University since Jan, 2012. He is an active member in KSRC (Khalifa University Research Center) where he leads a project for the development of wearable blood glucose monitor SOC and a mobile surveillance SOC and safe exercise monitoring device. Hani published 81 articles in peer-reviewed journals and conferences, he has 11 issued US patents and 3 pending patent applications. Hani has a total of 19 years of industrial experience in ASIC chip design, microprocessor design, DSP core design, graphics core design and embedded system design. His experience spans DSP core design, microprocessor peripherals design, microprocessors and graphics core deign. Prior to joining Khalifa University he worked as a Senior Chip Designer (Technical Lead) at Apple incorporation; where he worked on the design and implementation of Apple next generation graphics cores for its mobile products (iPad, iPhone, …etc.), prior to joining Apple, he worked for several leading semiconductor companies including Intel (ATOM mobile microprocessor design), AMD (Bobcat mobile microprocessor design), Qualcomm (QDSP DSP core design for mobile SOC’s), Synopsys (a key member of Synopsys turnkey design group where he taped out many ASICs and designed the I2C DW IP included in Synopys DesignWare library), Fujitsu (SPARC compatible high performance microprocessor design) and Motorola Australia (M210 low power microprocessor synthesizable core design).  
Baker Mohammad (M’04–SM’13) received the B.S. degree from the University of New Mexico, Albuquerque, NM, USA, the M.S. degree from Arizona State University, Tempe, AZ, USA, and the Ph.D. degree from the University of Texas at Austin, Austin, TX, USA, in 2008, all in electricaland computer engineering. He was a Senior Staff Engineer and the Manager with Qualcomm, Austin, where he was involved in designing high performance and low power DSP processor used for communication and multimedia application. He was involved in a wide range of microprocessors design with Intel Corporation, Santa Clara, CA, USA, from high performance, server chips >100 W (IA-64), to mobile embedded processor low power sub-1 W (xscale). He has over 16 years of industrial experience in microprocessor design with an emphasis on memory, low power circuit, and physical design. He is currently an Assistant Professor of Electronic Engineering with the Khalifa University of Science, Technology and Research, Abu Dhabi, United Arab Emirates, and a Consultant with Qualcomm Inc., San Diego, CA, USA. In addition, he is involved in microwatt range computing platform for WSN focusing on energy harvesting and power management, including efficient dc/dc and ac/dc converters. He holds ten issued U.S. patents and has several pending patent applications. He has authored one book entitled Embedded Memory Design for Multi-Core and SoC and co-authored several publications in digital system design, memory design and testing, energy harvesting, power management, and power conversion, in addition to emerging memory technology modeling and design. His current research interests include power efficient computing, highyield embedded memory, and emerging technology, such as memristor, STTRAM, and computer architecture. Dr. Mohammad has served the IEEE in many editorial and administrative capacities. He is a member of the Technical Program Committee of several IEEE conferences, such as the International Conference on Computer Design, the International Conference on Environmental and Computer Science, and the VLSI-SoC Conference. He is a Regular Reviewer of the IEEE TRANSACTIONS ON VLSI SYSTEMS and the IEEE TRANSACTIONS ON DESIGN AUTOMATION OF ELECTRONIC SYSTEMS. He is an Active Member of region eight student activities, including the Student Best Paper Competition, the UAE Chapter Student Day, and the KUSTAR Student Branch Advisor.  
Dr. Mihai Sanduleanu received his MSc, MEE and PhD degrees from the Technical University of Iasi, Romania; Eindhoven University of Technology, The Netherlands; and the University of Twente, The Netherlands; in 1990, 1993 and 1999, respectively. Hereceived the Philips Foundation MSc and PhD Fellowship in 1993 and 1994 respectively.
 
From 1999 to 2000, Dr. Sanduleanu was with Philips Semiconductors, Nijmegen, The Netherlands, and he worked on fiber optic communication circuits. He then moved to Philips Research Eindhoven, The Netherlands, and was involved in fiber optic interface circuits, radio frequency (RF) interconnected chip (IC) design, mm-waves transceiver design and ultra-low power radios (2000-2007). While at Philips Research, Dr. Sanduleanu was Adjunct Professor in the Microelectronics group of Eindhoven University of Technology. In 2008, he spent six months at Inter-university Microelectronics Center (IMEC), Leuven, Belgium, conducting research on 60GHz transceiver design and THz electronics. From 2008 to 2013, he conducted research at the IBM T.J. Watson Research Center, Yorktown Heights, New York, in mm-wave transceivers for communication, imaging and radar, high-speed analog-to-digital convertersfor wired/wireless communication systems and ultra-low power radios.  
Dr. Sanduleanu is currently an Associate Professor at Khalifa University. His areas of expertise include wireless transceiver design for RF/mm-waves/THz communication, THz electronics, high speed communication circuits for serial input and output, high speed analog-to-digital converters, phased-array systems, imaging, fiber optic interface IC, ultra-low power radios, data and clock recovery and phase locked loop (PLL), high accuracy/low-power analog/mixed-signal circuits and systems, system on chip (SoC) design, on-chip sensors and actuators for autonomous transceivers (wired/wireless), high-speed digital circuits and systems, electromagnetics, and antenna design.  
Dr. Sanduleanu has authored/co-authored four books and more than 80 papers in international conferences and journals. He also holds 51 granted US patents. Dr. Sanduleanu served as Associate Editor for IEEE Transactions on Circuits and Systems and he serves in the Editorial Board of the Analog Integrated Circuits and Signal Processing Journal.
 
Mohammed Ismail (S’80–M’82–SM’84–F’97) spent over 25 years in academia and industry in the U.S. and Europe. He served as a Faculty Member with the Ohio State University’s (OSU) ElectroScience Laboratory, Columbus, OH, USA. He was a Research Chair with the Swedish Royal Institute of Technology, Stockholm, Sweden, where he founded the Radio and Mixed Signal Integrated Systems Research Group. He held visiting appointments with Aalto University, Espoo, Finland, the Norwegian Institute of Technology, Trondheim, Norway, the University of Oslo, Oslo, Norway, Twente University, Enschede, The Netherlands, and the Tokyo Institute of Technology, Tokyo, Japan. He joined the Khalifa University of Science, Technology and Research, Abu Dhabi, United Arab Emirates, in 2011, where he holds the ATIC Professor Chair and is the Head of the Electricaland Computer Engineering Department, which exists on both campuses in Sharjah and Abu Dhabi. He advised the work of over 50 Ph.D. degree students and over 100 M.S. degree students. He has served as a Corporate Consultant to over 30 companies and is the Co-Founder of Micrys Inc., Columbus, Spirea AB, Stockholm, Firstpass Technologies Inc., Dublin, OH, USA, and ANACAD (currently part of Mentor Graphics), Cairo, Egypt. He is currently a prolific author and an entrepreneur in chip design and test. He is the Founder of the OSU’s Analog VLSI Laboratory, one of the foremost research entities in the field of analog, mixed signal, and RF integrated circuits. He serves as the Director of KSRC and the Co-Director of the ATIC-SRC Center of Excellence on Energy Efficient Electronic Systems targeting self-powered chip sets for wireless sensing and monitoring, biochips, and power management solutions. He has authored or co-authored over 20 books and over 150 journal publications and holds eight U.S.patents issued and several pending. His current research interests include self-healing design techniques for CMOS RF and millimeter wave ICs in deep nanometer nodes. Prof. Ismail received the U.S. Presidential Young Investigator Award, the Ohio State Lumley Research Award four times in 1992, 1997, 2002, and 2007, and the U.S. Semiconductor Research Corporations Inventor Recognition Award twice. He is the Founding Editor of the Journal of Analog Integrated Circuits and Signal Processing (Springer) and serves as the Journals Editor-in-Chief. He has served the IEEE in many editorial and administrative capacities. He is the Founder of the IEEE International Conference on Electronics, Circuits and Systems and the Flagship Region 8 Conference of the IEEE Circuits and Systems Society.

Textul de pe ultima copertă

This book introduces power amplifier design in 22nm FDSOI CMOS dedicated towards 5G applications at 28 GHz and presents 4 state-of-the-art power amplifier designs.  The authors discuss power amplifier performance metrics, design trade-offs, and presents different power amplifier classes utilizing efficiency enhancement techniques at 28 GHz. The book presents the design process from theory, simulation, layout, and finally measurement results.
  • Covers thoroughly design steps starting from theory, to simulation, layout and measurement steps;
  • Includes simulation details and comparison with existing state of the art designs;
  • Shows not only the design of the power amplifier block, but also the steps taken to integrate it into a complete phased array transmitter architecture;
  • Discusses design trade-offs at high frequency, including performance metrics and technology limitations, and discusses different ways to overcome them.

Caracteristici

Covers thoroughly design steps starting from theory, to simulation Includes simulation details and comparison with existing state Shows not only the design of the power amplifier block